Box-Design Amp Box S Product information

Category
Loudspeakers
Type
Product information

Box-Design Amp Box S: a compact and powerful stereo amplifier delivering 25W/35W into 8/4 ohms. Boasting an advanced amplifier module and enhanced performance, it offers exceptional audio quality rivaling that of Class A tube amplifiers. Connect effortlessly to various sources via stereo input (RCA) and enjoy pristine sound with a frequency response of 5Hz - 20kHz.

Box-Design Amp Box S: a compact and powerful stereo amplifier delivering 25W/35W into 8/4 ohms. Boasting an advanced amplifier module and enhanced performance, it offers exceptional audio quality rivaling that of Class A tube amplifiers. Connect effortlessly to various sources via stereo input (RCA) and enjoy pristine sound with a frequency response of 5Hz - 20kHz.

Product information
06. 2012
Update: DZ Datum 02.05.2012
Amp Box S
Stereo power amplifier
 Ultra compact & audiophile
 NEW! advanced amplifier module
 NEW! More power and further improved performance
 Stereo input (RCA)
 Gold plated speaker sockets
 Suitable for Banana/Spade/Pin/bare wire
 Trigger input
 Trigger output for further Amp Box S
 Metal casing protects against vibration and interference
 On/Off front-sided
 Faceplate silver or black
Technical data
Power output 2 x 25W/35W @ 8/4 ohms
Frequency response 5Hz - 20kHz (+ 0dB, - 0,5dB)
Channel separation > 40dB @ 20kHz
Signal-to-noise ratio > -100dB (IEC -A)
THD < 0,05% @ 10W
Gain 22dB
Input 1 pair RCA sockets
Input sensitivity 1V
Input impedance 47kohm
Speaker sockets 4mm Ø Banana sockets, spades. Pins or bare
wire
Trigger 12V DC In&Out, 2-pole jack socket Ø 2,5mm
External power supply 20V/3A DC (peak 7A DC);100 - 240V, 50/60Hz
Standby power consumption < 1 Watt
Dimensions W x H x D 103 x 36 x 104 (122mm with sockets)
Weight 670g without power supply
PRO-JECT AUDIO SYSTEMS
a division of AUDIO TUNING GmbH
1050 Wien, Margaretenstraße 98,
Ultra compact power amplifier - efficient & audiophile!
A ultra high-efficiency
Bi-Phase PWM (Pulse Wave Modulation) circuit with SMD parts incorporates 35 years of R&D and gives outstanding audio
performance, while staying cool on the outside. It fulfills our demand for high resolution with superior micro dynamics and room-filling power. Sound
quality is aimed to be as close as possible to Class A tube amplifiers with their liquid and lifelike presentation. The Amp Box S is micro-sized and
therefore allows easy placement and can be switched on & off remotely via a trigger signal. A 45cm power-on cable is supplied for this purpose. For
Bi- or Tri-amplification use, the remote power-on signal can be relayed to further units.
Retail price
249,00 €
< Front view
(black faceplate)
rear view >
connections
  • Page 1 1

Box-Design Amp Box S Product information

Category
Loudspeakers
Type
Product information

Box-Design Amp Box S: a compact and powerful stereo amplifier delivering 25W/35W into 8/4 ohms. Boasting an advanced amplifier module and enhanced performance, it offers exceptional audio quality rivaling that of Class A tube amplifiers. Connect effortlessly to various sources via stereo input (RCA) and enjoy pristine sound with a frequency response of 5Hz - 20kHz.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI