Pro-Ject Grease it Product information

PRODUCT INFORMATION

PRO-JECT AUDIO SYSTEMS

www.project-audio.com

GREASE IT

Bearing lubricant

MSRP: 15€ (incl. VAT)

Amount 2.3 ml

• To be used with inverted bearings

• Helps a smooth movement

• Pre-lled syringe

• Easy handling

How to use Grease it

A turntable is a delicate thing and needs proper care. The

motor is moving the platter and the bearing‘s lubrication

is being worn o over time. This is caused by many fac-

tors, such as climate and humidity. Therefore we cannot

give a recommended time as to when to replace the lubri-

cation. Best is to keep it constantly lubcricated. With

Grease it you can keep the bearing of your turntable

smooth for a perfect playback. Please only use Grease it

for turntables with inverted bearings, like RPM Line, Xten-

sion models and Signature Line. For non-inverted bea-

rings you should use Lube it.

We recommend to keep your turntable constantly mo-

ving, as this guarantees a smooth bearing. This however

will lead to metal abrasion, so you will need to change the

lubrication more often. As to how much you should use,

we can only advise to use the amount you feel right. It

can‘t be too much, worst case scenario is you will have to

clean some grease o your turntable to keep it looking

clean.

Technical data and prices are subject to change.

Page 1/1