LEDYI Lighting KV is a rotary panel LED dimmer with 1 channel output, allowing you to control the brightness of your LED lights with ease. It features compatibility with RF 2.4G dimming remote control, enabling wireless dimming from a distance. Additionally, you can select between logarithmic or linear dimming curves to achieve your desired dimming effect.
LEDYI Lighting KV is a rotary panel LED dimmer with 1 channel output, allowing you to control the brightness of your LED lights with ease. It features compatibility with RF 2.4G dimming remote control, enabling wireless dimming from a distance. Additionally, you can select between logarithmic or linear dimming curves to achieve your desired dimming effect.
INPU T
12-4 8VDC
1 2
3
1 2 1 2 1 2
3
logarithmlinear
250Hz500Hz2KHz8KHz
PWM Frequency
Dimming Curve
+ +
AC100-240V Power Supply
12-48VDC
Constant Voltage
Single color LED strip
+
RF remote
Wiring Diagram
User Manual Ver 1.0.1
Operation temperature
Case temperature (Max.)
Environment
IP20
IP rating
Dimming data
Dimming range
Rotary knob + RF 2.4GHz
30m(Barrier-free space)
4096 (2^12) levels
0 -100%
Technical Parameters
Output power 96W/192W/144W/192W
(12V/24V/36V/48V)
Output voltage 12-48VDC
Output current 8A@12/24V, 4A@36/48V
Input and Output
Input voltage 12-48VDC
Safety and EMC
EMC standard (EMC) EN301 489,EN 62479
Radio Equipment(RED) EN300 328
Certification CE,EMC,LVD,RED
EN60950
Safety standard(LVD)
Output type Constant voltage
Warranty and Protection
5 years
Protection Reverse polarity
Short circuit
Warranty
Input signal
Control distance
Dimming gray scale
Ta: -30
O
C ~ +55
O
C
T c: +85
O
C
Model No.: KV
DC12-48V/Step-less dimming/Wireless remote control/Four PWM frequency/Linear or logarithmic dimming
Features
● Rotary panel constant voltage LED dimmer, 1 channel output.
● Rotate knob to change brightness, support push and long push operation.
● Compatibility with . RF 2.4G dimming remote control
● Logarithmic or linear dimming curve selectable.
● PWM frequency 250Hz, 500Hz, 2kHz or 8kHz selectable.
● Light on/off fade time 3s selectable.
Page 1
Mechanical Structures and Installations
Dimming curve Logarithmic or linear
250Hz, 500Hz, 2kHz, 8kHz
PWM Frequency
LVD RED
Power Input -
Output LED +
Power Input +
DIP switch
Output LED -
IN PUT
12- 48 VD C
1 2
3
1 2 1 2 1 2
3
logarithm
linear
250Hz500Hz2KHz8KHz
PWM Frequency
Dimming Curve
+ +
MATC H
Match key
MATCH
Rotary Panel LED Dimmer
Installation diagram
KV Rotar y Panel LED Dimmer
48.50 mm
51.50 mm
86.00 mm
86.00 mm
(Optional)
User Manual Ver 1.0.1 Page 2
Dimming curve setting
Linear dimming curve Logarithmic dimming curve
100
90
80
70
60
50
40
30
20
10
PWM duty(%)
100
90
80
70
60
50
40
30
20
10
PWM duty(%)
50 60 70 80 90 100
Brightness(%)
10 20 30 40
Gamma=1.6
50 60 70 80 90 1 00
Brightness(%)
10 20 30 40
Gamma=1.0
3 3
100
90
80
70
60
50
40
30
20
10
PWM duty(%)
PWM frequency setting
We can select four PWM frequency: 250Hz, 500Hz, 2kHz or 8kHz.
Higher PWM frequency, will cause lower output current, higher power noise,
but more suitable for camera(No flickers for video).
1 2 1 2 1 2 1 2
250Hz500Hz2KHz8KHz
KV Rotar y Panel LED Dimmer
● Push: Turn on or off light.
After turn on light:
● Rotate: Rotate knob to adjust brightness, 2.5 turns, 50 levels.
● Long push(1-6s): Continuous 256 levels brightness adjustment.
Knob function
Match remote control (three match ways)
Use Match key
Match:
Short press match key, immediately press on/off key(single zone remote) or zone key(multiple zone remote) of the remote.
Use Power Restart
Match:
Switch off the power, then switch on power. Repeat again. Immediately short press on/off key (single zone remote)
or zone key (multiple zone remote) 3 times on the remote. The light blinks 3 times means match is successful.
I
Delete:
Switch off the power, then switch on power. Repeat again. Immediately short press on/off key (single zone remote)
or zone key (multiple zone remote) 5 times on the remote. The light blinks 5 times means all matched remotes were deleted.
Delete:
Press and hold match key for 5s to delete all match.
End user can choose the suitable match/delete ways. Three options are offered for selection:
Match:
Turn on light, turn off, immediately push the knob for 5s, immediately press on/off key(single zone remote)
or zone key(multiple zone remote) of the remote.
The rotar y panel dimmer can also match with the RF dimming remote (optional).
Use Knob
Delete:
Turn on light, turn off, immediately push the knob for 10s, delete all matched remotes.
Long press match key 5s, then short press match key 3 times,
the light on/off time will be set to 3s, the indicator light blink 3 times.
Long press match key 10s, restore factory default parameter,
the light on/off time also restore to 0.5s.
Light on/off fade time
Malfunctions Analysis & Troubleshooting
Malfunctions
Causes Troubleshooting
1. Output cable is too long.
2. Wire diameter is too small.
3. Overload beyond power supply capability.
4. Overload beyond controller capability.
1. Reduce cable or loop supply.
2. Change wider wire.
3. Replace higher power supply.
4. Add power repeater.
No response
from the remote
1. The battery has no power.
2. Beyond controllable distance.
3. The controller did not match the remote.
1. Replace battery.
2. Reduce remote distance.
3. Re-match the remote.
1. No power.
2. Wrong connection or insecure.
1. Check the power.
2. Check the connection.
No light
Uneven intensity
between front and
rear,with voltage drop
-
1
-
2
LEDYI Lighting KV is a rotary panel LED dimmer with 1 channel output, allowing you to control the brightness of your LED lights with ease. It features compatibility with RF 2.4G dimming remote control, enabling wireless dimming from a distance. Additionally, you can select between logarithmic or linear dimming curves to achieve your desired dimming effect.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
SKYDANCE V1-H_P User manual
-
Isoled 114664 User manual
-
iskydance V1-L Single Color LED Controller User manual
-
-
Philio V1-H User manual
-
SKYDANCE T1-K User manual
-
-
LEDLyskilder V1-L/P Single Color LED Controller User manual
-
-
Super Lighting LED V1-L Operating instructions
