Below you will find brief information for Wireless Charger BWC02. This user manual provides instructions on how to set up and use your BRAUN Wireless Charging Pad. It covers topics such as connecting the charger, understanding the charger status indicators, safety instructions, and optimal charging practices. The manual emphasizes the importance of using a 20W power delivery wall adapter for best charging performance and keeping the device aligned with the center of the charging area. Additionally, it outlines the warranty terms and contact information for support. It also include FCC and UKCA warnings.
Below you will find brief information for Wireless Charger BWC02. This user manual provides instructions on how to set up and use your BRAUN Wireless Charging Pad. It covers topics such as connecting the charger, understanding the charger status indicators, safety instructions, and optimal charging practices. The manual emphasizes the importance of using a 20W power delivery wall adapter for best charging performance and keeping the device aligned with the center of the charging area. Additionally, it outlines the warranty terms and contact information for support. It also include FCC and UKCA warnings.
English
Getting started
1. Choose a flat location with easy access to a working electric supply to power up your wireless charger.
2. Peel away the frosted surface protector.
3. Unravel the USB-C cable and plug it into your adapter.
4. Plug the other end of the cable into your BRAUN Wireless Charging Pad.
Charger status
Your BRAUN Wireless Charging Pad has a green LED light at the front that gives you information about the status of the device.
1. When connecting to the adaptor, the light will flash 3 times showing that it is ready to use.
2. When a device is placed on the pad, a continuously glowing light indicates that it is charging. It will dim to a low level after 60 seconds.
3. If the device to be charged is not placed correctly or if there are any foreign objects on the pad, the light will flash continuously and the device will
not be charged properly.
How to safely and properly use your BRAUN Wireless Charging Pad
1. If you’re using an accessory with your phone, for example, a phone case, card wallet…etc., please remove it before charging as it may affect the
charging performance or even cause the charger to malfunction.
2. For maximum charging efficiency, the device must be aligned with the centre of the charging area.
3. For best charging performance, we recommend you use a 20W power delivery wall adapter.
4. No metal case or foreign objects should be placed between the device and the charging pad.
5. High temperature will reduce the charging speed and restrict power, which is a phenomenon common to all wireless chargers. It is recommended
that you charge your device in environments with temperatures below 25oC / 77oF.
Product Description
Name: Braun Wireless Charger
Model Number: BWC02
Input: 5V/3A; 9V/2.2A; 12V/1.67A
Output: 5W / 7.5W / 10W / 15W
Operating frequency range: 110-205KHz (For UK), 115-205KHz (For US)
Manufacture: Zeon Ltd.
Manufacture address: Unit 1, Phoenix Park, Apsley Way, London, England, NW2 7LN
WARNINGS - Important Safety Instructions
Read all instructions and warnings prior to using this product. Improper use of this product may result in product damage, excess heat, fire or
explosion.
X Do not place metal objects between phone and charger as the charger may get very hot.
X Do not use or store devices in high-temperature environments, including heat caused by intense sunlight or other forms of heat, as this may
reduce charge efficiency or reduce lifespan of the product.
X Do not place product in fire or other excessively hot environments. Exposure to fire or extremely high temperature may cause explosion.
X Do not expose the wireless charger to water. Exposure to water may result in short circuiting. If short circuiting occurs immediately turn off at the
wall.
X Do not disassemble this product, any modification or disassemble may result in a void of warranty.
X Use of a power supply or charger not recommended may result in a risk of fire or injury to persons.
X If this device is accessible to or may be used by a minor, the purchasing adult agrees to be solely responsible for providing supervision,
instruction, and warnings. Purchaser agrees to defend, indemnify, and hold Manufacturer harmless for any claims or damages arising from
unintended use or misuse by a minor.
X All products have gone through a thorough quality assurance inspection. If you find that your device is excessively hot, is emitting odour, is
deformed, abraded, cut, or is experiencing or demonstrating an abnormal phenomenon, immediately stop all product use.
Note:
This product is meant for use only in conjunction with the QI compatible device. Manufacturer is not responsible for any damages to any device
incurred through the use of this product. Manufacturer shall not in any way be liable to you or to any third party for any damages you or any third
party may suffer as a result of use, intended or unintended, or misuse of this product in conjunction with any device or accessory other than the
appropriate device for which this product is designed. We will not be responsible for any damages you or any third party may suffer as a result of
misuse of this product as outlined above.
Guarantee
2 year guarantee against material and workmanship defects. The guarantee is valid in those countries where the unit is officially being sold.
Physical damage is not covered under the Guarantee.
Braun helpline
Should you have a problem with your product, please check your local service centre at:
www.braun-clocks.com
www.braun-watches.com
or contact +44 208 208 1833
WARNING! This product is covered by the Waste Electrical and Electronic Equipment (WEEE) directive. It should not be discarded with normal
household waste but taken to your local collection centre for recycling.
FCC Information
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful
interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
WARNING! Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to
operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio
or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
UKCA Warning
This device was tested for operations. To comply with RF exposure requirements, a minimum separation distance of 20cm must be maintained
between the user’s body and the wireless charger, including the antenna. Third-party belt-clips, holsters, and similar accessories used by this
device should not contain any metallic components. Body-worn accessories that do not meet these requirements may not comply with RF exposure
requirements and should be avoided. Use only the supplied or an approved antenna.The device complies with RF specifications when the device
used at 20cm form your body.
UKCA The declaration of conformity is as follows
This device in compliance with the essential requirements and other relevant provisions of UK Radio Equipment Regulations (SI 2017/1206); UK
Electrical Equipment (Safety) Regulations (SI 2016/1101); and UK Electromagnetic Compatibility Regulations (SI 2016/1091). All essential radio
test suites have been carried out.
EU Declaration of Conformity
Hereby, Zeon Far East Ltd Declares that the product BWC02 is in compliance with the following Directives: Radio Equipment Regulations 2017,
Electrical Equipment (Safety) Regulations 2016 and The Restriction of the Use of Certain Hazardous Substances in Electrical and Electrical
Equipment 2012. The Full test of the UK declaration of conformity is available at the following internet address: www.braun-clocks.com.
Radiated H-Field: -2.26 dBuA/m@10m
Certain trademarks used under license from the Procter & Gamble Company or its affiliates.
-
1
-
2
Braun BWC02 User manual
- Type
- User manual
- This manual is also suitable for
Below you will find brief information for Wireless Charger BWC02. This user manual provides instructions on how to set up and use your BRAUN Wireless Charging Pad. It covers topics such as connecting the charger, understanding the charger status indicators, safety instructions, and optimal charging practices. The manual emphasizes the importance of using a 20W power delivery wall adapter for best charging performance and keeping the device aligned with the center of the charging area. Additionally, it outlines the warranty terms and contact information for support. It also include FCC and UKCA warnings.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
