Gewiss 67IB is a versatile and practical enclosure designed for secure and efficient electrical installations in various settings. It features a sturdy structure with tabs on the sides of the vertical walls, allowing for seamless integration into metal frames or direct mounting onto plasterboard walls. The product ensures easy assembly with the aid of special screws and provides ample space for accommodating modular devices like switches, sockets, and data connectors.
Gewiss 67IB is a versatile and practical enclosure designed for secure and efficient electrical installations in various settings. It features a sturdy structure with tabs on the sides of the vertical walls, allowing for seamless integration into metal frames or direct mounting onto plasterboard walls. The product ensures easy assembly with the aid of special screws and provides ample space for accommodating modular devices like switches, sockets, and data connectors.
1600 mm
Fixing on a metal frame
Articles On metal frame On sheet On masonry wall
Enclosures and distribution boards
Junction boxes
Boxes for interlocked socket-outlets 67IB and 44IB (with tabs*)
Boxes for domestic ranges - 3, 4, 6/7 gangs
Boxes for round domestic ranges - 2 and 2+2 gangs (with clamps)
Box for domestic ranges - 8 gangs (4+4) (with tabs*)
* Tabs on the sides of the horizontal walls. Boards (24, 36, 54, 72 modules) and box for interlocked socket-outlets (67 IB) equipped with fixing tabs on the sides of the vertical walls.
The products can be fixed on a metal frame in two ways: for products with tabs on the sides of the horizontal walls, use an extra horizontal frame; for products
with tabs on the sides of the vertical walls, use vertical uprights.
The structure is created with the aid of special screws for use with plasterboard, then the back-mounting box is fixed to the frame by means of the tabs.
E.g. assembly on a “U” rail profile (12 M enclosure)
Assembly of back-mounting box
with tabs on the sides of the vertical walls
E.g. assembly on a “C” upright profile (24 M board)
FIXING METHODS FOR GREEN WALL PRODUCTS
1600 mm
Assembly of back-mounting box
with tabs on the sides of the horizontal walls
Green Wall
1
Technical Information Version 2.1
For technical information contact the Technical Assistance Service or visit gewiss.com
Fixing on plasterboard
Method A: with tabs
The back-mounting box is fixed to the back of the sheet with the aid of the tabs, then anchored from the front of the sheet with special screws for use with
plasterboard.
ø68 mm
Method B: with clamps
The boxes for modular domestic ranges (3,4,6 gangs) and the round boxes can be fixed directly to walls (even double sheet walls) using the metal clamps. To prepare
the sheet for the installation of the boxes, use a hollow mill ø 68 (for rectangular boxes of 3,4,6 gangs) or a hollow mill ø 65 (for round boxes), using the references
on the boxes themselves.
E.g. fixing of a 3-gang box
E.g. fixing of a junction box
Green Wall
2
Technical Information Version 2.1
For technical information contact the Technical Assistance Service or visit gewiss.com
Fixing on a masonry wall
The back-mounting boxes of the PT DIN GREEN WALL and CM GREEN WALL junction boxes and of the boxes for interlocked switched socket-outlets are
equipped with special reference points so they can be fixed to masonry walls with the aid of wall plugs.
E.g. fixing of a junction box
Green Wall
3
Technical Information Version 2.1
For technical information contact the Technical Assistance Service or visit gewiss.com
E
F
D
I
I
B
L
P
8.5
O
A
H G
C
M
N
HPG
A
B
L
N
C
M
D'
F' E'
D
FE
N° / P
I
O
8.5
BEHAVIOUR WITH CHEMICAL AND ATMOSPHERIC AGENTS
Saline
solution
Acids Bases Solvents Mineral
oil
UV
rays
Concentrated Diluted Concentrated Diluted Hexane Benzol Acetone Ethyl alcohol
Resistant Not
resistant
Limited
resistance
Not
resistant
Limited
resistance Resistant Not
resistant
Not
resistant
Limited
resistance
Limited
resistance
Limited
resistance
Dimension tables
ENCLOSURES AND BOARDS
TECHNICAL CHARACTERISTICS
Regulation: IEC EN 606070-1 (CEI 23-48); IEC EN 60670-24 (CEI 23-49) (*).
Suitable for assemblies in compliance with IEC EN 61439-1 and IEC EN 61439-3
Degree of protection: IP 40 (even with open door)
Protection against indirect contacts: double insulation - (•)
Installation temperature: max. +60°C, min. -15°C
Rated voltage: 400V
Rated insulation voltage: 750V
Rated current: 125A
Material: GW PLAST technopolymer, halogen-free in accordance with EN 60754-2 (CEI EN
50267-2-2)
Impact resistance: IK 08
Heat resistance: thermo-pressure with ball 70°C
Resistance to abnormal heat and fire: Glow wire test 850°C
Installation: for mobile and plasterboard walls
Use: Indoor
(•) Complete insulation, in accordance with Standard EN 61140.
Notes: H-type casing in compliance with EN60670-24, and Ha-type in compliance with IEC60670-24.
(*) Enclosure type: GP (CEI 23-51) and PD
Overall dimensions Modular assembly Fixing
Code A B C N E F G H P D D’ E’ F’ I L M O N°/P
24M GW 40 606 PM 420 330 16 101 48 17 148 122 150 75 - - - 380 290 85 350 1/258
36M GW 40 609 PM 505 465 16 101 48 17 175 155 175 75 101 74 11 465 42 85 485 2/175
54M GW 40 610 PM 680 465 25 120 48 37 175 155 175 75 101 74 11 640 42 95 485 2/227.5
72M GW40 611 PM 880 465 25 120 48 37 175 155 175 75 101 74 11 805 42 95 485 2/327.5
Overall dimensions Modular assembly Fixing
Code A B C N D E F G H I L M O P
12M GW40 605 PM 270 330 16 101 75 48 17 148 122 223 290 85 282 182
40 CDK GREEN WALL - MODULAR PROTECTED ENCLOSURES AND DISTRIBUTION BOARDS - IP40
(•) Isolamento completo secondo Norma EN 61140.
Note: involucro tipo H in accordo a EN60670-24 e tipo Ha in accordo a IEC60670-24.
(*) Tipo di involucro: GP (CEI 23-51) e PD
Green Wall
4
Technical Information Version 2.1
For technical information contact the Technical Assistance Service or visit gewiss.com
Dimension tables
Notes: H-type casing in compliance with EN60670-22, and Ha-type in compliance with IEC60670-22.
TECHNICAL CHARACTERISTICS
Regulation: EN 60670-1; EN 60670-22; IEC 60670-24
Degree of protection: IP 40
Installation temperature: max. +60°C; min. -15°C
Material: GW PLAST technopolymer, halogen-free in accordance with CEI EN 60754-2
(CEI EN 50267-2-2)
Impact resistance: IK 07
Heat resistance: thermo-pressure with ball 70°C
Resistance to abnormal heat and fire: Glow wire test 850°C
Installation: for mobile and plasterboard walls
E
D
A
G
N° - S
N° MAX - MOD.
N° / PASSI
M
N
' D / ' E
7.5
H
C
F
B
' L
' I
L
I
JUNCTION BOXES
Codice
Modular boxes Cover Deep lid Max Ø
of conduit
per sector
Max Ø of conduit
in the back-
mounting box
Pde max.
power loss
A B C G H N° / P N° - S MAX
no./M I L ’I ’L D E F ’D ’E M N
GW 48 006 PM
GW 48 126 PM
GW 48 086
196 152 75 207 57 1/100 2 4.5 69 61 62 53.5 222 178 79 214 170 49 56 Ø50 Ø32 11W
GW 48 007 PM
GW 47 087 294 152 75 207 57 1/208 3 5 69 61 62 53.5 320 178 79 312 170 66 73 Ø50 Ø32 13W
GW 48 008 PM
GW 48 088 392 152 75 207 57 2/153 4 5 70 63 63 55.5 418 178 80 410 170 66 73 Ø50 Ø32 17W
GW 48 009 PM 480 160 75 213 57 1/153
1/250 3 8 70 61 63 53.5 506 186 80.5 - - - - Ø50 Ø50 25W
BEHAVIOUR WITH CHEMICAL AND ATMOSPHERIC AGENTS
Agent Saline
solution
Acids Bases Solvents Mineral
oil
UV
rays
Concentrated Diluted Concentrated Diluted Hexane Benzol Acetone Ethyl alcohol
48 PT / PT DIN
standard cover Resistant Not
resistant
Not
resistant
Limited
resistance
Limited
resistance
Not
resistant
Not
resistant
Not
resistant
Limited
resistance
Limited
resistance
Limited
resistance
Shockproof
cover for
48 PT / PT DIN
Resistant Not
resistant
Limited
resistance
Not
resistant
Limited
resistance Resistant Not
resistant
Not
resistant
Limited
resistance
Limited
resistance
Limited
resistance
48 PT DIN GREEN WALL - JUNCTION, CONNECTION AND DOMOTIC BOX - IP40
Green Wall
5
Technical Information Version 2.1
For technical information contact the Technical Assistance Service or visit gewiss.com
BEHAVIOUR WITH CHEMICAL AND ATMOSPHERIC AGENTS
Saline
solution
Acids Bases Solvents Mineral
oil
UV
rays
Concentrated Diluted Concentrated Diluted Hexane Benzol Acetone Ethyl alcohol
Resistant Not
resistant
Not
resistant
Limited
resistance
Limited
resistance
Not
resistant
Not
resistant
Not
resistant
Limited
resistance
Limited
resistance
Limited
resistance
G
H
D1 / E1
F
8.5
C
E
N° / P
D
A
B
I
Dimension tables
TECHNICAL CHARACTERISTICS
Regulation: EN 60670-1; EN 60670-22; IEC 60670-24;
Degree of protection: IP 40 (IP 44 spare covers)
Installation temperature: max. +60°C, min. -15°C
Material: GW PLAST technopolymer, halogen-free in accordance with
EN 60754-2 (CEI EN 50267-2-2)
Impact resistance: IK 07 (IP40 box)
IK 10 (IP44 cover)
Heat resistance: thermo-pressure with ball 70°C
Resistance to abnormal heat and fire: Glow wire test 850°C
Installation: for mobile and plasterboard walls
HIGH-CAPACITY JUNCTION BOXES
Notes: H-type casing in compliance with EN60670-22, and Ha-type in compliance with IEC60670-22.
Box Shallow lid Deep lid
A B C I N° / P D E F D1 E1 G H
GW 48 207 PM
GW 48 247
GW 48 267
260 260 121.5 303.5 1/110 280 280 7 286 286 67 74
GW 48 211 PM
GW 48 251
GW 48 271
520 260 121.5 303.5 2/193 540 280 7 286 286 67 74
48 CM GREEN WALL – HIGH-CAPACITY CONNECTION AND JUNCTION BOX - IP40
Green Wall
6
Technical Information Version 2.1
For technical information contact the Technical Assistance Service or visit gewiss.com
TECHNICAL CHARACTERISTICS
73
133.5 50
73
110 50
73
180 50
112
56
ø20
ø20
ø20 ø16
ø25
ø25
ø32
ø20
ø20
ø20 ø16
ø25
ø25
ø68 ø32
136.3
177
133.5
57
Dimension tables
BOXES FOR MODULAR RANGES, KNX DEVICES AND DIGITAL VISION
Notes: H-type casing in compliance with EN60670-1, and Ha-type in compliance with IEC60670-1.
TECHNICAL CHARACTERISTICS
Regulation: IEC EN 60670-1 (CEI 23-48)
Degree of protection: IP 40
Installation temperature: max. +60°C, min. -15°C (min. -25°C for boxes with 3,4,6 gangs)
Material: GW PLAST technopolymer, halogen-free in accordance with EN 60754-2 (CEI
EN 50267-2-2)
Impact resistance: IK 07
Heat resistance: thermo-pressure with ball 70°C
Resistance to abnormal heat and fire: Glow wire test 850°C
Installation: for mobile and plasterboard walls
BEHAVIOUR WITH CHEMICAL AND ATMOSPHERIC AGENTS
Saline
solution
Acids Bases Solvents Mineral
oil
UV
rays
Concentrated Diluted Concentrated Diluted Hexane Benzol Acetone Ethyl alcohol
Boxes
with 3, 4
and 6 gangs
Resistant Not
resistant
Not
resistant
Limited
resistance
Limited
resistance
Not
resistant
Not
resistant
Not
resistant
Limited
resistance
Limited
resistance
Limited
resistance
Round
boxes Resistant Not
resistant
Not
resistant
Limited
resistance
Limited
resistance
Not
resistant
Not
resistant
Not
resistant
Limited
resistance
Limited
resistance
Limited
resistance
Boxes
(with fixing
tabs)
Resistant Not
resistant
Not
resistant
Limited
resistance
Limited
resistance
Not
resistant
Not
resistant
Not
resistant
Limited
resistance
Limited
resistance
Limited
resistance
3 gangs GW 24 403 PM
6/7 gangs GW 24 406 PM 8 gangs (4+4) GW 24 237 PM
4 gangs GW 24 404 PM
24 SC GREEN WALL - FOR MODULAR RANGES, KNX DEVICES AND DIGITAL VISION
Green Wall
7
Technical Information Version 2.1
For technical information contact the Technical Assistance Service or visit gewiss.com
Dimension tables
BOXES FOR MODULAR RANGES, KNX DEVICES AND DIGITAL VISION
GW 24 234 PM
ø72
45
ø65
GW 24 282 PM
72
125.5 45
24 SC GREEN WALL – FOR MODULAR RANGES, KNX DEVICES AND DIGITAL VISION
Green Wall
8
Technical Information Version 2.1
For technical information contact the Technical Assistance Service or visit gewiss.com
BEHAVIOUR WITH CHEMICAL AND ATMOSPHERIC AGENTS
Saline
solution
Acids Bases Solvents Mineral
oil
UV
rays
Concentrated Diluted Concentrated Diluted Hexane Benzol Acetone Ethyl alcohol
Resistant Not
resistant
Not
resistant
Limited
resistance
Limited
resistance
Not
resistant
Not
resistant
Not
resistant
Limited
resistance
Limited
resistance
Limited
resistance
A
10 8.5
72.5
C
F
D
E
132
10 8.5
114
232
158
95
249
B
Dimension tables
TECHNICAL CHARACTERISTICS
Regulation: EN 60670-1 (CEI 23-48)
Installation temperature: min -15°C, max. +60°C
Material: GwPlast technopolymer, Halogen Free according to EN 60754-2
(CEI EN 50267-2-2)
Impact resistance: IK07
Heat resistance: thermo-pressure with ball 70°C
Resistance to abnormal heat and fire: Glow wire test 850°C
FLUSH-MOUNTING BOXES FOR INTERLOCKED SWITCHED SOCKET-OUTLETS
Notes: H-type casing in compliance with EN60670-1, and Ha-type in compliance with IEC60670-1.
Code A B C D E F
SBF GW 66 681 PM 141 184 130 170 174 -
CBF GW 66 682 PM 179 225 164 208 208 120
GW 66 681 PM - GW 66 682 PM
GW 66 683 PM
FLUSH-MOUNTING BOXES FOR INTERLOCKED SWITCHED SOCKET-OUTLETS
Green Wall
9
Technical Information Version 2.1
For technical information contact the Technical Assistance Service or visit gewiss.com
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
Gewiss 67IB is a versatile and practical enclosure designed for secure and efficient electrical installations in various settings. It features a sturdy structure with tabs on the sides of the vertical walls, allowing for seamless integration into metal frames or direct mounting onto plasterboard walls. The product ensures easy assembly with the aid of special screws and provides ample space for accommodating modular devices like switches, sockets, and data connectors.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
ABB Gemini 1SL0202A00 User manual
-
Trox FKRS-EU Installation guide
-
-
Master SM4.0 4250.046 E19R1 Owner's manual
-
Brand-Rex C6CPCU020-888HB Datasheet
-
Knauer AZURA User manual
-
JUNG SP 0081 U Smart Panel User manual
-
Stahl ORCA01 Operating instructions
-
MK K1534 Installation guide
-
Giacomini KPM30 Operating instructions
