Fortin 96251 Installation guide

Brand: Fortin

Model: 96251

Type: Installation guide

Fortin 96251 is a remote starter and alarm system designed for 2017 Ford F-450 Keyless Std vehicles with automatic transmission. It offers keyless entry, immobilizer bypass, and a variety of programmable features to enhance your vehicle's security and convenience. The system also includes hood pin, door status, trunk status, hand-brake status, and foot-brake status monitoring for added protection.

Home » FORTIN » FORTIN 96251 2017 Ford F-450 Keyless Std Remote Starters and Alarm Systems Installation

Guide

REGULAR INSTALLATION

ADDENDUM – SUGGESTED WIRING CONFIGURATION

Contents

1 96251 2017 Ford F-450 Keyless Std Remote Starters and Alarm

Systems

2 MANDATORY INSTALL

3 DESCRIPTION

4 AUTOMATIC TRANSMISSION WIRING CONNECTION

5 PROGRAMMING PROCEDURE

6 REMOTE STARTER FUNCTIONALITY

7 Documents / Resources

8 Related Posts

96251 2017 Ford F-450 Keyless Std Remote Starters and Alarm Systems

FORTIN 96251 2017 Ford F-450 Keyless Std Remote Starters

and Alarm Systems Installation Guide

Manuals+ — User Manuals Simpliﬁed.

ONLY COMPATIBLE WITH AUTOMATIC TRANSMISSION VEHICLES.

Vehicle functions supported in this diagram (functional if equipped)

FORD

F-150 Key 2015-2019

F-250 Key 2017-2019

F-350 Key 2017-2019

F-450 Key 2017-2019

F-550 Key 2017

• Immobilizer bypass

• Lock

• Unlock

• Arm

• Disarm

• RAP Disable

• Parking Lights

• Tachometer

• Heated seats

• Heated Mirrors

• Rear desfrost

• Door Status

• Trunk Status

• Hood Status*

• Hand-Brake Status

• Foot-Brake Status

• Active OEM Remote Start

FIRMWARE VERSION

4.01

ONLY – SEULEMENT

To add the ﬁrmware version and the options, use the FLASH LINK UPDATER or FLASH LINK MOBILE tool, sold

separately.

Program bypass option

IF THE VEHICLE IS NOT EQUIPPED WITH FUNCTIONAL HOOD PIN:

UNIT OPTION DESCRIPTION

A11 Hood trigger (Output Status).

Program bypass option:

UNIT OPTION DESCRIPTION

C1 OEM Remote status (Lock/Unlock) monitoring

Parts required (Not included)

1x 7.5Amp. Fuse

The vehicle must be equiped with the OEM remote with the door locks.

MANDATORY INSTALL

* HOOD PIN

HOOD STATUS : THE HOOD PIN SWITCH MUST BE INSTALLED IF THE VEHICLE CAN BE REMOTE

STARTED WITH THE HOOD OPEN, SET FUNCTION A11 TO OFF.

A11

Notice: the installation of safety elements are mandatory. The hood pin is an essential security element and must

be installed.

THIS MODULE MUST BE INSTALLED BY A QUALIFIED TECHNICIAN. A WRONG CONNECTION CAN CAUSE

PERMANENT DAMAGE TO THE VEHICLE.

DESCRIPTION

AUTOMATIC TRANSMISSION WIRING CONNECTION

PROGRAMMING PROCEDURE

Press and hold Insert the programming button:

Inster the 4-Pin (Data-Link) connector.

The Blue, Red, Yellow and Blue & Red LEDs will alternatively illuminate.

2. Release the programming button when the LED is BLUE.

If the LED is not solid BLUE disconnect the 4-Pin connector (Data-Link) and go back to step 1.

3. Insert the required remaining connectors.

4. Turn the key to the Ignition ON/RUN position.

The BLUE LED will ﬂash rapidly.

5. Turn the key to the OFF position.

The BLUE LED will turn oﬀ.

6. Turn the key to the Ignition ON/RUN position.

The YELLOW LED will turn ON.

7. Wait 5 seconds.

8. Turn the key to the OFF position.

The module is now programmed.

REMOTE STARTER FUNCTIONALITY

All doors must be closed. Remote start the vehicle. Unlock the doors with the remote-starter remote or the

OEM remote.

Insert and Turn the key to th

Ignition ON/RUN position.

www.fortinbypass.com

Module label

Notice: Updated Firmware and Installation Guides

Updated ﬁ rmware and installation guides are posted on our web site on a regular basis. We recommend that you

update this module to the latest ﬁ rmware and download the latest installation guide(s) prior to the installation of

this product.

WARNING

The information on this sheet is provided on an (as is) basis with no representation or warranty of accuracy

whatsoever.

It is the sole responsibility of the installer to check and verify any circuit before connecting to it. Only a computer

safe logic probe or digital multimeter should be used. FORTIN ELECTRONIC SYSTEMS assumes absolutely no

liability or responsibility whatsoever pertaining to the accuracy or currency of the information supplied. The

installation in every case is the sole responsibility of the installer performing the work and FORTIN ELECTRONIC

SYSTEMS assumes no liability or responsibility whatsoever resulting from any type of installation, whether

performed properly, improperly or any other way. Neither the manufacturer or distributor of this module is

responsible of damages of any kind indirectly or directly caused by this module, except for the replacement of this

module in case of manufacturing defects. This module must be installed by qualiﬁ ed technician. The information

supplied is a guide only. This instruction guide may change without notice. Visit www.fortinbypass.com to get

the latest version.

TECH SUPPORT

Tél: 514-255-HELP (4357)

1-877-336-7797

ADDENDUM GUIDE

www.fortinbypass.com

WEB UPDATE

Documents / Resources

FORTIN 96251 2017 Ford F-450 Keyless Std Remote Starters and Alarm Systems [pdf] Ins

tallation Guide

96251 2017 Ford F-450 Keyless Std Remote Starters and Alarm Systems, 96251, 2017 Ford F-

450 Keyless Std Remote Starters and Alarm Systems, Remote Starters and Alarm Systems, St

arters and Alarm Systems, Alarm Systems

Manuals+,

Fortin 96251 Installation guide

Fortin 96251 Installation guide

Fortin 96251 Installation guide

Related papers

Other documents