Hanover LC9810403 User manual

  • Hello! I am an AI chatbot trained to assist you with the Hanover LC9810403 User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
  • How do I connect the power cable?
    How do I connect the keyboard tray?
    How do I remove the keyboard tray?
    How do I manage cables?
    What should I do if the desk does not rise up or rises up slowly?
    What should I do if the desk does not respond while long pressing the up/down button?
35"
5.5"-19.7"
23.2"
12.7"
34.1"
27.2"
23.1"
33LBS
Max:4LBS
MAX
35"(W)x23.2"(D)x5.5-19.7"(H)
890MM(W)x590MM(D)x140-500MM(H)
33 LBS Maximum Weight Capacity
12.7"(D)x34.1"(L)
322MM(D)x867MM(L)
4 LBS Maximum Weight Capacity
1 2
x4
x1 x1
A B C
D E
x1 x1
No. Desktop Frame No. Keyboard Tray No. Cable Ties
No. No.
Hook & Loop Power Cable
+
STEP 1
STEP 2
Connect power cable
Insert first
Buckle then
Adjust desk riser
Up button
Down button
After connecting the power, press
the left and right buttons with your
fingers to adjust the desired height
DO NOT place hands on or near support
bars. Pinch points are created during
lifting and lowering the desktop. Failure
to follow these instructions may result in
serious personal injury.
Attention
Step 1: Unpack the carton
Step 2: Connect power cable
Please unpack the carton, take out the
product and place it on the table.
Please make sure that the size of the desktop is in
line with the requirements, otherwise it will cause
property damage or personal injury.
Notice! Please untie the straps of the
table legs before using the product.
5
STEP 3 Connect the keyboard tray
Hang up
Hang up Tighten
Tighten
Hook the connection plate to the installed knob and tighten the knob.
Step 3: Connect the keyboard tray
Step 4: Place devices
STEP 4
Please put the devices onto the top
of the workstation.
Please make sure all installed equipment
are on the table, and not sticking off of the
edge, or it may harm or cause damage.
Careful
6
STEP 5
This surface is with glue,
helping to fix the cable
management on the table
Nylon ties
Use the hook & loop to
guide and bundle the cables
Cable
Adhesive buckle helps to make the
cables tidy and clean. Please leave
enough length of cable for height
adjustment function, otherwise it
may cause unexpected lost.
Careful
How to remove the keyboard tray
Unscrew the knob when removing
the keyboard tray, then remove the
keyboard tray
Unscrew
Step 5: Cable management
Using the Handset
How to use handset
Adjust the desk upwards
Adjust the desk downwards
Button
Upwards
Downwards

Check if all the cables are connected

Check if the load is too heavy - should not exceed 33 lbs.


If the above processes do not work, please contact customer service at 877-397-
5144.
7
THIS PAGE INTENTIONALLY LEFT BLANK
8
/