LINKRICH 3PRTO2000 is an Electric Conveyor Toaster, specially designed to speed up the toasting operation. Products for toasting pass through a heating chamber for rapid and thorough toasting. It is a product of extensive research and field testing, with materials selected for maximum durability, attractive appearance and optimum performance. The unit is thoroughly inspected and tested prior to shipment.
LINKRICH 3PRTO2000 is not weatherproof, so it should be located indoors where the ambient air temperature is a minimum of 70oF(21℃) and a maximum of 85oF(25℃). It should not be placed in an area that restricts air flow around the front or rear of the unit or in the direct discharge path of air conditioning vent or makeup air vent.
LINKRICH 3PRTO2000 is an Electric Conveyor Toaster, specially designed to speed up the toasting operation. Products for toasting pass through a heating chamber for rapid and thorough toasting. It is a product of extensive research and field testing, with materials selected for maximum durability, attractive appearance and optimum performance. The unit is thoroughly inspected and tested prior to shipment.
LINKRICH 3PRTO2000 is not weatherproof, so it should be located indoors where the ambient air temperature is a minimum of 70oF(21℃) and a maximum of 85oF(25℃). It should not be placed in an area that restricts air flow around the front or rear of the unit or in the direct discharge path of air conditioning vent or makeup air vent.
1
TT Series Conveyor Bread Toaster
Thanks for choosing LINKRICH products:
We mainly produce food processing equipment, baking equipment, professional kitchen equipment, steel kitchen ware,
commercial refrigeration equipment and ice cream machine, more than 6 series, 127 kinds of products for you to choose.
They are environment-friendly with excellent designs. High technique to save power, complete functions, easy to operate,
LINKRICH products are more competitive than those of the same line in the international market.
ATTENTION
New user or repairing this product must be performed by the experts or qualified person or those who have gotten the
license of installation, or those who are authorized by the manufacturer.
When installation or maintenance, please obey the following instructions carefully to ensure the safety use of this
appliance.
Please keep this instruction Manual for future reference, or hand it to next user.
Put off the package to make sure none of the parts is missing or damaged. If there is any doubt about the product,
please do not use it, and consult it to the experts.
Keep the packing material out of reach of the children to avoid accident( Especially the plastic bag, screw etc)
This appliance could be only operated by the person who is familiar with the unit.
When not using the appliance or the operator is absent, please turn off the unit to avoid any accidental injury or
damage.
When it needs to be repaired, please ask for expert, and use the original fitted spare part. It will be dangerous if not
following the above requirements.
This appliance is just for commercial using, not for any other use, otherwise, it may be dangerous.
Do not rinse the equipment with water directly.
Clean the surface of stainless steel periodically with appropriate method to prevent any damage brought by oxidization
or any other chemical interference.
Owner information
General
This Electric Conveyor Toaster is specially designed to speed the toasting operation. Products for toasting pass through a
heating chamber for rapid and thorough toasting of products. Dryness, moisture, sugar content and thickness of bread
product affect the ability to achieve the perfect toasted product. Conveyor speed, not temperature, determines the toasting
color.
Warranty Information
Model
Voltage
(V)
Power
(Kw)
Net Weight
(kg)
Out put
(pcs/h)
Dimensions
(mm)
TT-150
220
1.34
14
150~180
288x418x387
TT-300
220
1.94
16
300~350
368x418x387
TT-450
220
2.64
20.5
450~500
468x418x387
This manual provides the installation, safety and operating instructions for the Electric Conveyor Toasters. We recommend
all installation, operating and safety instructions appearing in this manual be read prior or installation or operation of your
Conveyor Toaster. Safety instructions that appear in this manual after a warning symbol and the words WARNING or
CAUTION printed in bold face are very important. WARNING means there is the possibility of serious injury or death
to yourself or others. CAUTION means there is the possibility of minor or moderate injury. CAUTION without the
symbol signifies the possibility of equipment or property damage only. This Electric Conveyor Toaster is a product of
extensive research and field testing. The materials used were selected for maximum durability, attractive appearance and
optimum performance. Every unit is thoroughly inspected and tested prior to shipment.
IMPORTANT! Keep these instructions for future reference.
If the unit changes ownership, be sure this manual accompanies the equipment.
2
Important safety information
Throughout this manual, you will find the following safety words that signify important safety issues with regards to
operating or maintaining the equipment.
WARNINGS
1. Plug toaster into a properly grounded electrical outlet of the correct voltage, size, and plug configuration. If the plug and
receptacle do not match, contact a qualified electrician to determine the proper voltage and size, and install the proper
electrical outlet.
2. To avoid any injury, turn the power switch off, unplug the unit from the power source and allow to cool before performing
any maintenance.
3. For safe and proper operation, the unit must be located at a reasonable distance form combustible walls and materials. If
safe distances are not maintained, discoloration or combustion could occur. Do not locate toaster under shelving or closer
than 12″(31 cm) from the ceiling.
4. Allow a minimum of 1″(3cm) clearance along the sides. Allow a clearance of 12″(31cm) along the front and rear discharge
to ensure proper operation and safety.
5. To prevent any injury or damage do not pull unit by power cord
6. To prevent any injury, discontinue use if power cord is frayed or worn.
CAUTIONS
1. Locate the unit at the proper counter height, in an area that is convenient for use. The location should be level to prevent
the unit or its contents from accidentally falling, and strong enough to support the weight of the unit.
2. Do not place anything on top of the toaster; doing so could damage toaster or subject personnel to possible injury.
3. The toasting of coated or buttered products such as garlic bread, cheese sandwiches and sweet rolls is NOT
recommended. Residue will reduce toaster performance and could possibly ignite inside the toaster.
4. When setting up the unit for operation, make sure power to the unit is off and the toaster is at room temperature. Failure
to do so could result in personal injury.
5. To avoid damage to the unit or injury to personnel always operate toaster with crumb tray installed.
6. To avoid any injury, do not remove the crumb tray for cleaning until toaster is cool.
7. Unit is not weatherproof. For safe and proper operation locate the unit indoors where the ambient air temperature is a
minimum of 70oF(21℃) and a maximum of 85oF(29℃).
8. Do not locate the toaster in an area subject to excessive temperature or grease from grills, fryers, etc. Excessive
temperature could cause damage to the unit. Do not place toaster in an area that restricts air flow around the front or rear
of the unit. Do not place toaster in direct discharge path of air conditioning vent or makeup air vent.
Use only non-abrasive cleaners. Abrasive cleaners could scratch the finish of your toaster marring its appearance and
making it susceptible to soil accumulation.
Installation
UNPACKING
1. Remove unit and all packing materails from shipping carton.
WARNING
GENERAL WARNING. Indicates information important
to the proper operation of the equipment. Failure to
observe may result in damage to the equipment
and/or severe bodily injury or death.
WARNING
ELECTRIC WARNING. Indicates information relating to
possible shock hazard. Failure to observe may result in
damage to the equipment and/or severe bodily injury or
death.
CAUTION
GENERAL CAUTION. Indicates information Important
to the proper operation of the equipment. Failure to
observe may result in damage to the equipment.
WARNING
HOT SURFACE WARNING. Indicates information Important
to the proper operation of the equipment. Failure to
observe may result in damage to the equipment.
3
2. Open the large box. Remove all packing materials and protective covering from the unit and parts.
3. Remove tape from discharge chute, crumb tray and toast collector pan.
4. If unit is not level, use 9/16″(14cm) open-end wrench to adjust the foot of each leg until unit is level.
LOCATION
CAUTION
Do not locate the toaster in an area subject to excessive temperatures or grease from grills, fryers, etc.
Excessive temperatures could cause damage to the unit.
Do not place toaster in an area that restricts air flow around the front or rear of the unit. Do not place toaster in direct
discharge path of air conditioning vent or makeup air vent.
WARNING
1. For safe and proper operation, the unit must be located a reasonable distance from combustible walls and materials. If
safe distances are not maintained, discoloration or combustion could occur. Do not locate toaster under shelving or closer
than 12″(31cm) from the ceiling.
2. Allow a minimum of 1″(3cm ) clearance along the sides. Allow clearance of 12″(31cm) along the front and rear discharge
to ensure proper operation and safety.
CAUTION
1. Locate the unit at the proper counter height, in an area that is convenient for use. The location should be level to prevent
the unit or its contents from accidentally falling, and strong enough to support the weight of the unit.
2. Do not place anything on top of the toaster; doing so could damage toaster or subject personnel to possible injury.
SET-UP
CAUTION
1. Unit is not weatherproof. For safe and proper operation locate the unit indoors where the ambient air temperature is a
minimum of 70oF(21℃) and a maximum of 85oF(25℃).
2. The toasting of coated or buttered products such as garlic bread, cheese sandwiches and sweet rools is NOT
recommended. Residue will reduce toaster performance and could possibly ignite inside the toaster.
3. When setting up the unit for operation, make sure power to the unit is off and the toaster is at room temperature. Failure
to do so could result in personal injury.
TOAST FEED RAMP
The toast feed ramp is installed at the factory and can be used in two positions.
1. When in the upright position, the toaster is set for automatic feed. Bread products enter the toaster by placing them on
the feed ramp and releasing.
2. For manual feeding of product, tip the feed ramp until it rests on top of the unit. In this position bread products can be
manually loaded by placing them directly on the conveyor belt.
CAUTION
Some exterior surfaces on the unit will get hot. Use caution when touching these areas to avoid injury.
TOAST CRUMB TRAY
Install toast crumb tray directly below the conveyor belt and below the stop pins. Insert until the front of the crumb tray
meets the stop pins.
CAUTION
1. To avoid damage to the unit or injury tot personnel always operate toaster with crumb tray installed.
2. To avoid any injury, do not remove the crumb tray for cleaning until toaster is cool.
FRONT/REAR DISCHARGE
The toaster can be configured to discharge in the front or rear. User can pull up the rear discharge door for front discharge
and push down the rear discharge door for rear discharge.
4
CAUTION
To avoid any injury, do not remove the crumb tray for cleaning until toaster is cool.
Operation
FOR MODEL EQUPPED WITH ROCKER SWITCH
1. Plug toaster into a properly grounded electrical outlet of the correct voltage, size and puge configuration. (See the
Rating Label)
2. Place the On/Off switch in the On position.
3. Turn the Color Control to the lightest position while the unit heats up.
(Note: Allow approximately 15 to 21 minutes for a warm-up period.)
4. After warm-up period, set the Color Control to the medium position and toast two slices of bread product then
re-adjust the Color Control to the desired setting.
(Note: To toast moist products such as English Muffins, rye bread or whole wheat, slow the conveyor by turning the
Color Control knob to a darker setting (clockwise)).
FOR MODEL EQUIPPED WITH ROTARY SELECTOR
1. Plug toaster into a properly grounded electrical outlet of the correct voltage, size and plug configuration. (See the
Rating Label)
2. Rotate the Rotary switch in the high-heat position.
3. Turn the Color Control to the lightest position while the unit heats up.
(Note: Allow approximately 15 to 20 minutes for a warm-up period.)
4. After warm-up period, set the Color Control to the medium position and toast two slices of bread product then
re-adjust the Color Control to the desired setting.
(Note: To toast moist products such as English Muffins, rye bread or whole wheat, slow the conveyor by turning the
Color Control knob to a darker setting (clockwise)).
5. This unit can be used for one sided toasting, such at buns and English Muffins by rotating the rotary switch to the top
side heat only (buns).
POWER SAVE MODE
Selected this toaster can go into a Power Save Mode by turning the rotary selector into Power Save Mode. The toaster is
operating at 25% power.
(Note: To place toaster back into full operation turn the selector back in to TOAST. Unit is back up to full power within 5
minutes.)
Maintenance
GENERAL
The Electric Conveyor Toasters are designed for maximum durability and performance, with minimum maintenance.
WARNING
TO AVOID ANY INJURY, TURN THE POWER SWITCH OFF, UNPLUG THE UNIT FORM THE POWER SOURCE AND ALLOW TO
COOL BEFOR PERFORMING ANY MAINTENANCE.
CLEANING
Exterior
To preserve the bright finish of the unit, it is recommended that the exterior surfaces be wiped daily with a damp cloth.
Stubborn stains may be removed with a good stainless steel cleaner or non-abrasive cleaner. Hard to reach areas should be
cleaned with a small brush and mild soap.
CAUTION
USE ONLY NON-ABRASIVE CLEANERS. ABRASIVE CLEANERS COULD SCRATCH THE FINISH OF YOUR TOASTER MARRING ITS
APPEARANCE AND MAKING IT SUSCEPTIBLE TO SOIL ACCUMULATION.
Toast Crumb Tray & Toast Collector Pan
5
Remove from unit and wash with soap and water, then rinse.
Toast Feed Ramp
Press in the two wire spokes and remove guide form unit. Wipe clean with a soft, damp cloth or soak the guide in a mild
solution of 1 cup ammonia and 1 gallon of water (227 milliliters and 3.785 liters). Re-install guide by aligning wire spokes
with holes in toaster.
ONE YEAR PARTS WARRANTY
LINKRICH warrants to the original purchaser of every new LINKRICH product, under normal and proper use and
maintenance service as specified by LINKRICH and upon proper installation and start-up in accordance with the instruction
packet supplied with each LINKRICH unit. LINKRICH’s obligation under this warranty is limited to a period of one (1) year
from the date of original installation.
WARRANTY CLAIMS
All claims for parts must be made directly through LINKRICH. All claims should include:
Personal Details: Products Details:
Your name Model number
Your company Serial number of the product
Address Date of purchase
Email Proof of purchase
Phone
Pertinent information supporting the existence of the alleged defect.(Such as picture etc.)
Please send the above information to Service@chinalinkrich.com or Fax to +86 20 87607453
Our warranty departments will according to the actual situation and reply you within
24hours.
What is not conected by this Warranty
Linkrich’s sole obligation under this warranty is limited to replacement of parts, Subject to the additional limitations below.
This warranty neither assumes nor authorizes any person to assume obligations other than those expressly covered by this
warranty. This warranty is limited to replacement of parts, and the shipment charge is not included.
No consequential damages. Linkrich is not responsible for Economic loss; or special, indirect, or consequential damages,
including without limitation, losses or damages arising from food or product spoilage claims whether or not account of
refrigeration failure.
Warranty is not transferable. This warranty is not assignable and applies only in favor the original purchaser/user to whom
delivered. Any such assignment or transfer shall avoid the warranties herein made and shall avoid all warranties, express or
implied, including any warranty of merchantability or fitness for a particular purpose.
Improper usage . Linkrich assumes no liability for parts or labor coverage for component failure or other damages resulting
from improper usage or installation or failure to clean and/or maintain product as set forth in the warranty packet provided
with the unit.
Residential applications: linkrich assumes no liability for parts or labor coverage for component failure or other damages
resulting from installation in non-commercial or residential applications.
Alteration, neglect, abuse, issue, accident, damage during transit or installation, fire, flood, acts of god. Linkrich is not
responsible for the repair or replacement of any parts that linkrich determines have been subjected after the date of
manufacture to alteration, neglect, abuse, accident, damage during transit or installation, fire, flood, or act of god.
Improper electrical connections. Linkrich is not responsible for the repair or replacement of failed or damaged components
resulting from electrical power failure, the use of extension cords, low voltage, or voltage drops to the unit.
No implied warranty of merchantability or fitness for a particular purpose: there are no other warranties, expressed, implied
or statutory, except the one (1) year parts warranty as described above. These warranties are exclusive and in lieu of all
other warranties, including implied warranty and merchantability or fitness for a particular purpose. These are no warranty
which extend beyond the description on the face hereof.
-
1
-
2
-
3
-
4
-
5
LINKRICH 3PRTO2000 is an Electric Conveyor Toaster, specially designed to speed up the toasting operation. Products for toasting pass through a heating chamber for rapid and thorough toasting. It is a product of extensive research and field testing, with materials selected for maximum durability, attractive appearance and optimum performance. The unit is thoroughly inspected and tested prior to shipment.
LINKRICH 3PRTO2000 is not weatherproof, so it should be located indoors where the ambient air temperature is a minimum of 70oF(21℃) and a maximum of 85oF(25℃). It should not be placed in an area that restricts air flow around the front or rear of the unit or in the direct discharge path of air conditioning vent or makeup air vent.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
Blizzard BCT2 Electric Conveyor Toaster User manual
-
Caterchef 688095 User manual
-
-
Metos TM10H Installation guide
-
Hatco TOAST-QWIK TQ-10 Series Installation guide
-
VEVOR KXLSDSLTT-4500001V1 User manual
-
-
-
-