Foodservice Division: Phone 800-441-8440
MHC/Retail Display Divisions: Phone 800-637-5100
EG04.07 Rev. 05/10
Catalog Specification Sheet No.
EG04.07
Cleanroom Accessories
EAGLE GROUP
100 Industrial Boulevard, Clayton, DE 19938-8903 USA
Phone: 302-653-3000 • Fax: 302-653-2065
www.eaglegrp.com
Eagle Foodservice Equipment, Eagle MHC, SpecFAB
®
, and Retail Display are divisions of Eagle Group. ©2010 by the Eagle Group
Item No.:
Project No.:
S.I.S. No.:
Cleanroom Accessories
Specification Sheet
Spec sheets available for viewing, printing or downloading from our online literature library at www.eaglegrp.com
For custom configuration or fabrication needs, contact our SpecFAB
®
Division.
MODELS:
CH*
CH*-S
CP*-EPS
CPS*5-250
EPEH*-S
EPH*-S
EPUH*-S
KBD-1/SS
KBD-2
KBD-2/SS
P*-EPS
SCS*5-180
wire mount keyboard station
Optional Keyboard Stations for Workstations
• 20
1
⁄2˝ wide x 11
1
⁄2˝ deep (521 x 292mm).
• For 24˝ (610mm)-wide wire shelves.
chrome stainless steel weight
model # model # lbs. kg
KBD-2 KBD-2/SS 6.0 2.7
Replacement Garment Hanger Tubes
• Mounts onto 18˝ and 24˝ (457 and 610mm)-wide wire shelves.
• For freestanding or wall mounted gowning racks with hanger tubes.
garment hanger tube
chrome stainless length weight
model # model # in. mm lbs. kg
CH24 CH24-S 24˝ 610 1.5 0.7
CH30 CH30-S 30˝ 762 1.7 0.8
CH36 CH36-S 36˝ 914 2.2 1.0
CH42 CH42-S 42˝ 1067 2.7 1.2
CH48 CH48-S 48˝ 1219 3.2 1.5
CH54 CH54-S 54˝ 1372 3.5 1.6
CH60 CH60-S 60˝ 1524 3.8 1.7
CH66 CH66-S 66˝ 1676 4.3 2.0
CH72 CH72-S 72˝ 1829 4.7 2.1
utility cart
handle
Electropolished Handles
width weight weight
in. mm model # lbs. kg model # lbs. kg
14˝ 356 EPH14-S 1.7 0.8 EPEH14-S 1.7 0.8
18˝ 457 EPH18-S 1.9 0.9 EPEH18-S 1.9 0.9
21˝ 533 EPH21-S 2.1 1.0 EPEH21-S 2.1 1.0
24˝ 610 EPH24-S 2.3 1.1 EPEH24-S 2.3 1.1
Push Handles
Easily slips
over posts.
Extended Push Handles
Designed to prevent
damage to knuckles.
extended push handle
push handle
width weight
model # in. mm lbs. kg
EPUH18-S 18˝ 457 4.0 1.8
EPUH21-S 21˝ 533 4.2 1.9
EPUH24-S 24˝ 610 4.5 2.1
Electropolished Handles for Utility Carts
* See charts for complete model numbers.
Spec sheets available for viewing, printing or downloading from our online literature library at www.eaglegrp.com
Although every attempt has been made to ensure the accuracy of the information provided, we cannot be held responsible for
typographical or printing errors. Information and specifications are subject to change without notice. Please confirm at time of order.
Catalog Specification Sheet No.
EG04.07
Cleanroom Accessories
Item No.:
Project No.:
S.I.S. No.:
Rev. 05/10
Printed in U.S.A.
©2010 by Eagle Group
Foodservice Division: Phone 800-441-8440
MHC/Retail Display Divisions: Phone 800-637-5100
EAGLE GROUP
100 Industrial Boulevard, Clayton, DE 19938-8903 USA
Phone: 302-653-3000 • Fax: 302-653-2065
www.eaglegrp.com
Cleanroom Accessories
Polymer Stem Casters
• Designed as a substitute for more expensive models.
• These casters offer total corrosion resistance and are cart-washable.
• Features stainless steel axle & hardware, polymer horn, zinc-plated
stem, and polyurethane wheel.
*
Channel frames for rigid stem casters available.
Electropolished Posts
• Made to order.
• Includes electropolished foot plates.
post height weight
model # model # in. mm lbs. kg
P33-EPS CP33-EPS 33˝ 383 2.0 0.9
P54-EPS CP54-EPS 54˝ 1372 3.0 1.4
P63-EPS CP63-EPS 63˝ 1600 3.5 1.6
P74-EPS CP74-EPS 74˝ 1880 4.0 1.8
P86-EPS CP86-EPS 86˝ 2184 5.0 2.3
Stationary Mobile
Vibration Dampening Casters
• Where vibration dampening is important, these unique 50A shore
hardness “Softie™” casters reduce vibration transfer for
work in process.
• For use with mobile posts (above chart).
• Replacement caster wheel available: Model #SCW-180
wheel wheel
zinc capacity diameter face weight
type model # lbs. kg in. mm in. mm lbs. kg
stem/swivel SCSS5-180 180 81.6 5˝ 127 1
3
⁄8˝ 35 2.0 0.9
stem/brake SCSB5-180 180 81.6 5˝ 127 1
3
⁄8˝ 35 2.5 1.1
stem/rigid * SCSR5-180 180 81.6 5˝ 127 1
3
⁄8˝ 35 2.8 1.3
wheel wheel
zinc type of capacity diameter face weight
type model # bearing lbs. kg in. mm in. mm lbs. kg
stem/swivel CPSS5-250 delrin 250 113.4 5˝ 127 1
1
⁄4˝ 32 2.0 0.9
stem/brake CPSB5-250 delrin 250 113.4 5˝ 127 1
1
⁄4˝ 32 2.0 0.9
See Spec Sheet #EG04.06 for Hangers and Hanger Bar Kits.
/