Technoline KT-100 User manual

Instruction manual KT-100

To programm:

1. Press the MIN and SEC buttons and input the chosen time

Starting the timer:

2. After inputting the time press the START/STOP button.

3. The timer runs to 00:00, then the alarm sounds for 30 seconds

4. The alarm can be stopped by pressing the START/STOP button.

Reprogramming or stopping the timer during operation:

5. The timer can be stopped or reprogrammed at anytime. Restart by pressing the START/STOP

button.

6. To reset to 00:00, press the MIN and SEC button at the same time.

Repeating the same countdown:

7. By pressing the START/STOP button after the alarm has stopped, the countdown will restart.