Flytech POS365 is a feature-rich point-of-sale system designed to streamline your business operations. With its compact design and powerful hardware, it offers a user-friendly experience for both customers and employees. The 15-inch touchscreen display provides clear visuals for easy navigation, while the magnetic stripe reader enables quick and secure payment processing. Additionally, the POS365 comes with a variety of optional accessories, including a second display, VFD module, and various card reader modules, allowing you to customize it according to your specific business needs.
Flytech POS365 is a feature-rich point-of-sale system designed to streamline your business operations. With its compact design and powerful hardware, it offers a user-friendly experience for both customers and employees. The 15-inch touchscreen display provides clear visuals for easy navigation, while the magnetic stripe reader enables quick and secure payment processing. Additionally, the POS365 comes with a variety of optional accessories, including a second display, VFD module, and various card reader modules, allowing you to customize it according to your specific business needs.
USER MANUAL
Point-of-Sale
Hardware
System
VERSION V1.4 January 2011
ii
Copyright 2011
All Rights Reserved
Manual Version 1.4
Part Number: 3LMPP3600314
The information contained in this document is subject to change without notice.
We make no warranty of any kind with regard to this material, including, but not
limited to, the implied warranties of merchantability and fitness for a particular
purpose. We shall not be liable for errors contained herein or for incidental or
consequential damages in connection with the furnishing, performance, or use of
this material.
This document contains proprietary information that is protected by copyright. All
rights are reserved. No part of this document may be photocopied, reproduced
or translated to another language without the prior written consent of the
manufacturer.
TRADEMARK
Intel®, Pentium® and MMX are registered trademarks of Intel® Corporation.
Microsoft® and Windows® are registered trademarks of Microsoft Corporation.
Other trademarks mentioned herein are the property of their respective owners.
Safety
IMPORTANT SAFETY INSTRUCTIONS
To disconnect the machine from the electrical power supply, turn off the power 1.
switch and remove the power cord plug from the wall socket. The wall socket must
be easily accessible and in close proximity to the machine.
Read these instructions carefully. Save these instructions for future reference.2.
Follow all warnings and instructions marked on the product.3.
Do not use this product near water.4.
Do not place this product on an unstable cart, stand, or table. The product may fall, 5.
causing serious damage to the product.
Slots and openings in the cabinet and the back or bottom are provided for 6.
ventilation to ensure reliable operation of the product and to protect it from
overheating. These openings must not be blocked or covered. The openings
should never be blocked by placing the product on a bed, sofa, rug, or other
similar surface. This product should never be placed near or over a radiator or heat
register or in a built-in installation unless proper ventilation is provided.
This product should be operated from the type of power indicated on the marking 7.
label. If you are not sure of the type of power available, consult your dealer or local
power company.
Do not allow anything to rest on the power cord. Do not locate this product where 8.
persons will walk on the cord.
Never push objects of any kind into this product through cabinet slots as they 9.
may touch dangerous voltage points or short out parts that could result in a re or
electric shock. Never spill liquid of any kind on the product.
iii
CE MARK
This device complies with the requirements of the EEC directive 2004/108/EC
with regard to “Electromagnetic compatibility” and 2006/95/EC “Low Voltage
Directive”.
FCC
This device complies with part 15 of the FCC rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that
may cause undesired operation.
CAUTION ON LITHIUM BATTERIES
There is a danger of explosion if the battery is replaced incorrectly. Replace only
with the same or equivalent type recommended by the manufacturer. Discard
used batteries according to the manufacturer’s instructions.
Battery Caution
Risk of explosion if battery is replaced by an incorrectly type.
Dispose of used battery according to the local disposal instructions.
Safety Caution
Note: To comply with IEC60950-1 Clause 2.5 (limited power sources, L.P.S)
related legislation, peripherals shall be 4.7.3.2 “Materials for fire enclosure”
compliant
4.7.3.2 Materials for re enclosures
For MOVABLE EQUIPMENT having a total mass not exceeding 18kg.the material
of a FIRE ENCLOSURE, in the thinnest signi cant wall thickness used, shall be
of V-1 CLASS MATERIAL or shall pass the test of Clause A.2.
For MOVABLE EQUIPMENT having a total mass exceeding 18kg and for all
STATIONARY EQUIPMENT, the material of a FIRE ENCLOSURE, in the thinnest
signi cant wall thickness used, shall be of 5VB CLASS MATERIAL or shall pass
the test of Clause A.1
iv
LEGISLATION AND WEEE SYMBOL
2002/96/EC Waste Electrical and Electronic Equipment Directive on the treatment,
collection, recycling and disposal of electric and electronic devices and their
components.
The crossed dust bin symbol on the device means that it should not be disposed
of with other household wastes at the end of its working life. Instead, the device
should be taken to the waste collection centers for activation of the treatment,
collection, recycling and disposal procedure.
To prevent possible harm to the environment or human health from uncontrolled
waste disposal, please separate this from other types of wastes and recycle it
responsibly to promote the sustainable reuse of material resources.
Household users should contact either the retailer where they purchased this
product, or their local government office, for details of where and how they can
take this item for environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions of
the purchase contract.
This product should not be mixed with other commercial wastes for disposal.
v
Revision History
Changes to the original user manual are listed below:
Revision Description Date
V1.0 nitial release• 2007 March
V1.1 System Disassembly updated• 2007 May
V1.2
Cover page updated•
Connector Pin Denition updated•
2007 September
V1.2a Cash Drawer Power Setting Correction• 2007 September
V1.2b
Cash Drawer Power Setting Correction•
Updated specification with Second Display op-•
tions
Updated Optional Items with Second Display op-•
tions
Updated LCD ID jumper settings•
2008 June
V1.3
Motherboard B78 v1.0 updated to v2.2•
2nd display installation added•
VFD installation added•
SATA HDD photo added•
2-in-1 MSR + iButton module added•
2–in-1MSR + Finger Printer module added•
Remove Ventilation slots from rear cover•
2009 July
V1.3a Notice sentence put below the specication• 2009 August
V1.4 B68 v1.0 and C48 v2.1 motherboard added• 2011 January
vi
Table of Contents
1. Packing List .............................. 1
1-1. Standard Accessories ..............................................1
1-2. Optional Accessories ...............................................2
2. System View ............................. 3
2-1. Front & Side View ....................................................3
2-2. Rear View ................................................................4
2-3. I/O Ports View ..........................................................5
3. System Assembly .................... 6
3-1. HDD replacement ....................................................6
3-2. SSD Card Replacement ..........................................7
3-3. RAM Replacement ..................................................8
4. Peripheral Installation ............. 9
4-1. MSR Installation ......................................................9
4-2. 2-in-1 MSR+Finger Print Module Installation ..........10
4-3. 2-in-1 MSR+iButton Module Installation ................. 11
4-4. VFD Installation ......................................................12
4-5. Second Display Installation ....................................13
4-6. Cash Drawer Installation .......................................14
4-6-1. For B78 motherboard .............................................. 14
4-6-2. For B68/C48 motherboard ....................................... 16
vii
5. Jumper Setting ........................ 18
5-1. For B78 Motherboard .............................................18
5-1-1. Motherboard Layout ................................................ 18
5-1-2. Connectors & Functions .......................................... 19
5-1-3. Jumper Setting ........................................................ 20
5-2. For B68 Motherboard .............................................23
5-2-1. Motherboard Layout ................................................ 23
5-2-2. Connectors & Functions .......................................... 24
5-2-3. Jumper Setting ........................................................ 26
5-3. For C48 Motherboard .............................................29
5-3-1. Motherboard Layout ................................................ 29
5-3-2. Connectors & Functions .......................................... 30
5-3-3. Jumper Setting ........................................................ 31
6. Specication ........................... 36
Appendix: Drivers Installation .... 38
viii
The page is intentionally left blank.
1
Packing List1.
Standard Accessories
1-1.
System a.
Driver bankb.
User guidec.
Power adapterd.
Power corde.
RJ45-DB9 cable (x2)f.
Note: Power cord will be supplied differently according to
various region or country.
a
b
c
d
e
f
2
Optional Accessories
1-2.
MSR modulea.
2-in-1 MSR+nger print moduleb.
2-in-1 MSR+iButton reader modulec.
2nd Display (with VGA / DB15 cable) d.
SSD modulee.
PCI-E WLAN Card (with internal antenna cable)f.
pSSD card (with bracket)g.
VFD module (with RJ-45 cable)h.
WLAN Card
a
b
c
d
e
f
g
h
pSSD Card
3
System View2.
Front & Side View
2-1.
Item No. Description
1 Touch screen
2 MSR module / 2-in-1 MSR module (Optional)
3 Power LED
4 Power button
5 HDD installation cover
6 Hinge for TFT-LCD
7 Ventilation
8 VFD / 2nd display installation place (Optional)
9 screw holes (x4) for 2nd display installation
1
2
3
4
5
7
8
9
10
11
12
13
6
4
Rear View
2-2.
Item No. Description
10 Speakers (x2) (Optional)
11 I/O ports
12 VESA mount holes (x4)
13 Robber foot (x4)
1
2
3
4
5
7
8
9
10
11
12
13
6
5
I/O Ports View
2-3.
Item No. Description
a 2nd VGA (Female)
b DC-In
c LAN
d Cash Drawer (12V/24V)
e MIC-in
f Line-out
g COM 1, 2, 3, 4 (from left to right)
h USB x 4
i Parallel
j Power Switch
b c d e f g h i j
a
6
System Assembly3.
Loose the thumb screw (x2) to open the HDD cover.1.
Disconnect the SATA cable of HDD.2.
Loosen the screws (x4) fixed the HDD module on the sheet metal chassis.3.
Loosen the screws (x4) on both sides of the HDD metal bracket and replace 4.
the HDD module.
HDD replacement
3-1.
7
SSD Card Replacement
3-2.
Loosen the thumb screw (x2) to open the HDD cover.1.
Fasten the screw (x2) to x the SSD module bracket on the sheet metal 2.
chassis.
Fasten the screw (x2) to x the SSD card on the SSD module bracket.3.
Connect the SATA cable to the SSD card.4.
8
Removing a RAM module
Use both fingers to pull the ejector 1.
clips out of the sides of the module.
Slide out to take out the memory 2.
module from the memory slot.
Installing a RAM module
Slide the memory module into the 3.
memory slot and press down until
it fix with the ejector clips.
RAM Replacement
3-3.
Please open the HDD cover and disconnect the HDD SATA cable to separate
them form the system. You will nd the motherboard. Please refer to the
motherboard layout to nd the memory compartment. (See chapter 5 for different
motherboard.)
9
Peripheral Installation4.
MSR Installation
4-1.
Loosen the screws (x3) to open the MSR cover on the TFT LCD.1.
The system provide 3 kinds of MSR for selections, MSR , 2-in-1 MSR+nger print
reader, 2-in-1 MSR+iButton reader.
Connect the cable of MSR module to the respective connector of the system 2.
and fix the ground cable.
Install the MSR module into the right position of the system.3.
Fasten the screws (x2) to fix the MSR reader module with the system.4.
10
2-in-1 MSR+Finger Print Module Installation
4-2.
Loosen the screws (x3) to open the MSR cover on the TFT LCD module as 1.
step 1 of Chapter 4-1.
Connect the cable of the 2-in-1 MSR + finger print module to the respective 2.
connector on the system.
Fasten the screws (x2) to fix the reader with the system.3.
11
2-in-1 MSR+iButton Module Installation
4-3.
Loosen the screws (x3) to open the MSR cover on the TFT LCD module as 1.
step 1 of Chapter 4-1.
Connect the cable of the 2-in-1 MSR + iButton reader module to the 2.
respective connector on the system.
Fasten the screws (x2) to fix the reader with the system.3.
12
Thread the VFD cable through the VFD pole and connect the RJ45 connector 1.
to the I/O panel of the system.
Connect the other side of the VFD cable to the VFD display and align the 2.
VFD display correctly to the screw holes of the VFD pole.
Insert the wheel shaft assembly into the aligning hole on the side of the VFD 3.
hinge and VFD Pole.
Tighten the plastic wheel with the shaft which comes out from the other side 4.
of the aligning hole.
VFD Installation
4-4.
VFD Pole
Screws (x2)
VFD Accessories
Screws (x2)
VFD Cable (RJ45)
VFD Display
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
Flytech POS365 is a feature-rich point-of-sale system designed to streamline your business operations. With its compact design and powerful hardware, it offers a user-friendly experience for both customers and employees. The 15-inch touchscreen display provides clear visuals for easy navigation, while the magnetic stripe reader enables quick and secure payment processing. Additionally, the POS365 comes with a variety of optional accessories, including a second display, VFD module, and various card reader modules, allowing you to customize it according to your specific business needs.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
