Page is loading ...
USER’S MANUAL
COMBO HDD ENCLOSURE
(With SATA to SATA / USB to SATA)
Features and Specification：
Interface : USB standard interface / Standard SATA Interface Hard Disk Drives (7pin) ☆
☆
☆
☆
☆
☆
Data Transfer up to 1.5Gbps (SATA to SATA)/USB2.0 480Mbps
Ideal for backup and storage Data files.
Power Switch On/Off (option)
Power Supply: 12V Power Adaptor only.
LED indicator for power/active.
Requirements：
IBM or Compatible PC
Serial ATA port on PC.
Windows 2000 SP3 or above operating system
Packing Contents：
Item
3.5 Inch HDD Enclosure
SATA cable/USB cable
Screws
Power Adaptor
CD(With Win98SE Driver and User’s Manual)
- Page 1 -
Hardware Installation：
1. Please open the HDD enclosure.
2. Please assemble 3.5 inch HDD .
- Page 2 -
3. Please assemble the HDD follows below .
- Page 3 -
4. Please screw up the bottom of HDD enclosure.
5. Please assemble the HDD enclosure.
- Page 4 -
6. Please close the housing .
- Page 5 -
7. Please screw up the housing.
- Page 6 -
8. Please insert the plug and base.
- Page 7 -
CONNECTORS VIEW
Software Installation Notes:
*Win2000SP3 or above OS is higly recommended.
*Suggesting that users use upgrade version of BIOS .
- Page 8 -
/