Optoma EX330 User manual

1

English

Table of Contents ...................................................................................1

Usage Notice ..........................................................................................2

Safety Information .........................................................................................2

Precautions....................................................................................................3

Eye Safety Warnings .....................................................................................5

Introduction.............................................................................................6

Product Features ...........................................................................................6

Package Overview.........................................................................................7

Product Overview ..........................................................................................8

Main Unit ................................................................................................................ 8

Control Panel ......................................................................................................... 9

Connection Ports ................................................................................................. 10

Remote Control .................................................................................................... 11

Installation ............................................................................................12

Connecting the Projector .............................................................................12

Powering On/Off the Projector .....................................................................13

Powering On the Projector ................................................................................... 13

Powering Off the projector ................................................................................... 14

Warning Indicator ................................................................................................. 14

Adjusting the Projected Image.....................................................................15

Adjusting the Projector’s Height ........................................................................... 15

Adjusting the Projector’s Zoom / Focus ............................................................... 16

Adjusting Projected Image Size ........................................................................... 16

User Controls ....................................................................................... 17

Control Panel & Remote Control .................................................................17

On-screen Display Menus ...........................................................................20

How to operate .................................................................................................... 20

Menu Tree ............................................................................................................ 21

Image ................................................................................................................... 22

Display ................................................................................................................. 26

Setup .................................................................................................................... 30

Options ................................................................................................................. 35

Appendices...........................................................................................38

Troubleshooting ...........................................................................................38

Image Problems .................................................................................................. 38

Intermission Problems ........................................................................................ 41

Projector Status Indication .................................................................................. 41

Remote Control Problems ................................................................................... 43

Replacing the Lamp.....................................................................................44

Compatibility Modes ....................................................................................46

Optoma Global Ofces ................................................................................47

Regulation & Safety notices ........................................................................49

Table of Contents

2

English

Usage Notice

Safety Informations

The lightning ash with arrow head within an equilateral triangle is

intended to alert the user to the presence of uninsulated “dangerous

voltage” within the product’s enclosure that may be of sufcient magni-

tude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert

the user to the presence of import operating and maintenance (servicing)

instructions in the literature accompanying the appliance.

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT

EXPOSE THE PROJECTOR TO RAIN OR MOISTURE. DANGEROUS HIGH

VOLTAGES ARE PRESENT INSIDE THE ENCLOSURE. DO NOT OPEN THE

CABINET. REFER SERVICING TO QUALIFIED PERSONNEL ONLY.

Class B emissions limits

This Class B digital apparatus meets all requirements of the Canadian Inter-

ference-Causing Equipment Regulations.

Important Safety Instruction

1. Read these instructions –before using this projector.

2. Keep these instructions –for future reference.

3. Follow all instructions.

4. Install in accordance with the manufacturer’s instructions :

A. Do not block any ventilation openings. To ensure reliable

operation of the projector and to protect it from overheating, put the

projector in a position and location that will not interfere with its proper

ventilation. For example, do not place the projector on a bed, sofa,

carpet, or similar surface that may block the ventilation openings. Do not

put it in an enclosure, such as a bookcase or a cabinet that may keep air

from owing through its ventilation openings.

B. Do not use this projector near water or moisture. To reduce

the risk of re or electric shock, do not expose the projector to rain or

moisture.

C. Do not install near any heat sources, such as radiators, heaters,

stoves or other apparatus (including ampliers) that produce heat.

5. Clean only with a dry cloth.

6. Only use attachments/accessories specied by the manufacturer.

7. Refer all servicing to qualied service personnel. Servicing is required

when the projector has been damaged in any way, such as:

 Power supply cord or plug is damaged.

 Liquids have spilled or objects have fallen into the apparatus.

 The projector has been exposed to rain or moisture, does not operate

normally, or has been dropped.

Do not attempt to service this projector yourself. Opening or removing

covers may expose you to dangerous voltages or other hazards. Please

call Optoma to be referred to an authorized service center near you.

8. Do not let objects or liquids enter the projector as they may touch

dangerous voltage points or short-out parts that could result in a re or

electric shock.

9. See projector enclosure for safety related markings.

10. The projector should not be adjusted or repaired by anyone except prop-

erly qualied service personnel.

3

English

Usage Notice

When the lamp

reaches the end

of its life, the

projector will

not turn back on

until the lamp

module has

been replaced.

To replace the

lamp, follow

the procedures

listed under

“Replacing the

Lamp” section

on pages 44-45.

Precautions

Please follow all warnings, precautions and

maintenance as recommended in this user’s

guide.

▀■ Warning- Do not look into the projector’s lens when the lamp is

on. The bright light may damage your eyes.

▀■ Warning- To reduce the risk of re or electric shock, do not

expose this projector to rain or moisture.

▀■ Warning- Please do not open or disassemble the projector as

this may cause electric shock.

▀■ Warning- When replacing the lamp, please allow unit to cool

down, and follow all replacement instructions.

See pages 44-45.

▀■ Warning- This projector will detect the life of the lamp itself.

Please be sure to change the lamp when it shows

warning messages.

▀■ Warning- Use the “Lamp Reset” function from the on-screen

display “Options|Lamp Settings” menu after

replacing the lamp module (refer to page 37).

▀■ Warning- When switching the projector off, please ensure the

cooling cycle has been completed before

disconnecting the power. Allow 90 seconds for the

projector to cool down.

▀■ Warning- Do not use the lens cap when projector is in opera-

tion.

▀■ Warning- When the lamp is approaching to the end of its life,

the message “Lamp Warning: Lamp life exceeded.”

will show on the screen. Please contact your local

reseller or service center to change the lamp as soon

as possible.

▀■ Warning- To reduce the risk of injury to the eyes, do not look

directly into the laser beam on the remote control

and do not point the laser beam into anyone’s eyes.

This remote control is equipped with a Class II laser

that emits radiation.

4

English

Usage Notice

Do:

 Turn off the product before cleaning.

 Use a soft cloth moistened with a mild detergent to clean the

display housing.

 Disconnect the power plug from the AC outlet if the product

is not being used for a long period of time.

Don’t:

 Do not block the ventilation slots and openings on the unit.

 Do not use abrasive cleaners, waxes or solvents to clean the

unit.

 Do not use under the following conditions:

- In extremely hot, cold or humid environments.



Ensure that the ambient room temperature is within 5

- 35°C



Relative Humidity is 5 - 35°C, 80% (Max.), non-condens-

ing

- In areas susceptible to excessive dust and dirt.

- Near any appliance that generates a strong magnetic eld.

- In direct sunlight.

5

English

Usage Notice

Eye Safety Warnings

▀■ Avoid staring directly into the projector’s beam of light at all

times.

▀■ Minimize standing facing into the beam. Keep your back to

the beam as much as possible.

▀■ Using a stick or laser pointer is recommended to avoid the

need for the presenter to enter the beam.

▀■ Ensure that projectors are located out of the line of sight from

the screen to the audience; this ensures that, when presenters

look at the audience, they do not also have to stare at the pro-

jector lamp. The best way to achieve this is by ceiling-mount-

ing the projector rather than placing it on oor or table top.

▀■ When projector is used in a classroom, adequately supervise

students when they are asked to point out something on the

screen.

▀■ In order to minimize the lamp power needed, use room blinds

to reduce ambient light levels.

6

English

Introduction

Product Features

This product is a XGA single chip 0.55” DLP

®

projector.

Outstanding features include:

 True XGA, 1024 x 768 addressable pixels

 Texas Instruments Single chip DLP

®

Technology

 NTSC/NTSC4.43/PAL/PAL-M/PAL-N/SECAM and

HDTV compatible (480i/p, 576i/p, 720p, 1080i)

 Auto source detection with user denable settings

Full function IR remote control with mouse function

 User friendly multilingual On Screen Menu

 Advanced digital keystone correction and high quality

full screen image re-scaling

 User friendly control panel

 Macintosh and PC compatible

7

English

Introduction

Power Cord

IR Remote Control

Package Overview

This projector comes with all the items shown

below. Check to make sure your unit is complete.

Contact your dealer immediately if anything is

missing.

Documentation :



User’s Manual



Quick Start Card



Warranty Card



WEEE Card

Due to the

difference in

applications for

each country,

some regions may

have different

accessories.

2 x AAA Batteries

Projector with lens cap

VGA Cable

Soft Carry Bag

USB Cable

8

English

Introduction

1. Control Panel

2. Zoom

3. Focus

4. Zoom Lens

Main Unit

Product Overview

5. IR Receiver

6. Tilt-Adjustment Foot

7. Connection Ports

8. Power Socket

8

1

3

2

4

5

6

1

3

2

7

9

English

Introduction

Control Panel

1. Enter

2. Keystone Correction

3. Source

4. Four Directional Select Keys

5. Menu

6. Temp LED

7. Power LED

8. Lamp LED

9. Re-Sync

10. Power

2

5

3

7

6

8

1

9

10

4

2

10

English

Introduction

Connection Ports

1. USB Connector

2. VGA Input Connector (PC Analog Signal/Component

Video Input/HDTV/SCART)

3. HDMI Connector

4. S-Video Input Connector

5. Composite Video Input Connector

6. Kensington

TM

Lock Port

7. Power Socket

432

7 6

1 5

11

English

Introduction

Remote Control

1. Power On/Off

2. Laser LED

3. Laser Button

4. Enter/Mouse Left Click

5. PC/Mouse Control

6. Mouse Right Click

7. Brightness

8. Re-Sync

9. Enter

10. Zoom

11. Freeze

12. S-Video Source

13. Video Source

14. Number Buttons

15. Page Down

16. VGA Source

17. Blank

18. HDMI Source

19. Menu

20. Four Directional Select

Keys

21. Source

22. Keystone +/-

23. Page Up

5

6

8

11

12

18

21

1 2 3

19

22

15

7

23

9

20

17

16

10

13

14

4

12

English

Installation

VGA,DVI

DVD player, Set-top Box

HDTV receiver

S-Video Output

Video Output

E62405SP

R

MOLEX

Connecting the Projector

Due to the

difference in

applications for

each country,

some regions may

have different

accessories.

1...............................................................................................................Power Cord

2................................................................................................................. USB Cable

3................................................................................................................VGA Cable

4....................................................................... HDMI Cable (Optional Accessory)

5.....................................................................S-Video Cable (Optional Accessory)

6....................................................Composite Video Cable (Optional Accessory)

7....................................... SCART RGB/S-Video Adapter (Optional Accessory)

8............................................................. DVI/HDMI Cable (Optional Accessory)

1

2 3

4

5

6

7

8

13

English

Installation

Powering On the Projector

1. Open the lens cap. 

2. Ensure that the power cord and signal cable are securely

connected.  The Power LED will be Amber.

3. Turn on the lamp by pressing “Power” button either on

the top of the projector or pressing “Power” button on the

remote. The Power LED will ash green.

The startup screen will display in approximately 10 seconds.

The rst time you use the projector, you can select your

preferred language from quick menu after the startup screen

display.

4. Turn on your source (computer, notebook, video player,

etc.). The projector will detect your source automatically.

If the screen displays “No Signal”, please make sure the signal

cables are securely connected.

If you connect multiple sources at the same time, press the

“Source” button on the control panel or direct source key on the

remote control to switch between inputs.

Powering On/Off the Projector

Turn on the

projector rst and

then select the

signal sources.

2

Power

Lens Cap

1

Power LED

14

English

Installation

Warning Indicator

 When the “LAMP” indicator lights red, it indicates prob-

lem with the lamp and the projector will automatically shut

down by itself. Please contact your local reseller or service

center. See pages 47-48.

 When the “TEMP” indicator lights red, it indicates the pro-

jector has overheated. The projector will automatically shut

itself down.

Under normal conditions, the projector can be switched on

again after it has cooled down. If the problem persists, you

should contact your local dealer or our service center.

See pages 47-48.

 When the “TEMP” indicator ashes red, it indicates the fan

has failed. Please contact your local dealer or our service

center. See pages 47-48.

Powering Off the Projector

1. Press the “Power” button to turn off the projector lamp,

you will see a message displayed on the projector’s screen.

2. Press the “Power” button again to conrm, otherwise the

message will disappear after 15 seconds.

When you press “Power” button second, the system will

show the timing countdown on the screen.

3. The cooling fans continue to operate for about 10 seconds

for cooling cycle. When the Power LED turn Amber, the

projector has entered standby mode.

If you wish to turn the projector back on, you must wait until

the projector has completed the cooling cycle and has entered

standby mode. Once in standby mode, simply press “Power”

button to restart the projector.

4. Disconnect the power cord from the electrical outlet and

the projector.

5. Do not turn on the projector immediately following a

power off procedure.

15

English

Installation

Adjusting the Projected Image

Adjusting the Projector’s Height

The projector is equipped with tilt-adjustment foot for

adjusting the image height.

To raise the image:

Use screw in foot to raise the image to the desired height

angle and ne-tune the display angle .

To lower the image:

Use screw in foot to lower the image to the desired height

angle and ne-tune the display angle .

Tilt-Adjustment Feet

1

16

English

Installation

Adjusting the Projector’s Zoom / Focus

Adjusting Projection Image Size

You may turn the zoom lever to zoom in or out. To focus the

image, rotate the focus ring until the image is clear. The pro-

jector will focus at distances from 3.3 to 39.4 feet (1.00 to 12.0

meters).

Zoom Lever

Focus Ring

Screen

(Diagonal)

Max.

25" (63.5cm) 76" (193.0cm) 126" (320.0cm) 177" (449.6cm) 227" (576.6cm) 303" (769.6cm)

Min.

23" (58.4cm) 69" (175.3cm) 114" (289.6cm) 160" (406.4cm) 206" (523.2cm) 275" (698.5cm)

Screen

Size

Max.

(WxH)

20.1” x 15.0”

51 x 38cm

60.6” x 45.3”

154 x 115cm

100.8” x 75.6”

256 x 192cm

141.3” x 105.9”

359 x 269cm

181.9” x 136.2”

462 x 346cm

242.1” x 181.9”

615 x 462cm

Min.

(WxH)

18.5” x 13.8”

47 x 35cm

55.1” x 41.3”

140 x 105cm

91.7” x 68.5”

233 x 174cm

128.3” x 96.1”

326 x 244cm

165.0” x 123.6”

419 x 314cm

219.7” x 165.0”

558 x 419cm

Hd

Max.

2.36” (6.0cm) 7.09” (18.0cm) 11.42” (29.0cm) 16.14” (41.0cm) 20.47” (52.0cm) 27.17” (69.0cm)

Max.

1.97” (5.0cm) 5.91” (15.0cm) 10.63” (27.0cm) 14.57” (37.0cm) 18.50” (47.0cm) 24.41” (62.0cm)

Distance

3.3’ (1.0m) 9.8’ (3.0m) 16.4’ (5.0m) 23.0’ (7.0m) 29.5’ (9.0m) 39.4’ (12.0m)

This graph is for user’s reference only.

69"

(175.3cm)

114"

(289.6cm)

160"

(406.4cm)

206"

(523.2cm)

275"

(698.5cm)

25"

(63.5cm)

76"

(193.0cm)

126"

(320.0cm)

177"

(449.6cm)

227"

(576.6cm)

303"

(769.6cm)

3.3'

(1.0m)

39.4'(12.0m)

29.5'(9.0m)

23.0'(7.0m)

16.4'(5.0m)

9.8'(3.0m)

23"

(58.4cm)

Width

Height

Diagonal

Hd

17

English

User Controls

Control Panel

Control Panel & Remote Control

There are two ways for you to control the functions:

Control Panel and Remote Control.

Using the Control Panel

Power

Refer to the “Power On/Off the Projector” section

on pages 13-14.

Menu

Press “Menu” to launch the on-screen display

(OSD) menu. To exit OSD, Press “Menu” again.

Enter

Conrm your item selection.

Source

Press “Source” to select the input signal source.

Re-Sync

Automatically synchronize the projector to the

input source.

Keystone /

Adjust image distortion caused by tilting the

projector (±18 degrees)

Four Directional

Select Keys

Use to select items or make adjustments

to your selection.

Power LED

Indicate the projector’s status.

Lamp LED

Indicate the projector’s lamp status.

Temp LED

Indicate the projector’s temperature status.

18

English

User Controls

Remote Control

Using the Remote Control

Power

Refer to the “Power On/Off the Projector”

section on pages 13-14.

Laser

Button

Aim the remote at the viewing screen,

press and hold this button to activate the

laser pointer.

PC/ Mouse

Control

The PC/ Mouse Control can be used to

control mouse movement. The mouse

function is enabled using the USB cable to

connect your computer and the projector.

Enter

Conrm your item selection/Mouse Left

Click

Keystone

+/-

Adjust image distortion caused by tilting

the projector.

R Button

Mouse Right Click

Page +

Use the button to page up.

Brightness

Adjust the brightness of the image.

Source

Press “Source” to select the input signal

source at the next terminal.

Enter

Conrm your item selection.

Re-Sync

Automatically synchronize the projector to

the input source.

Component

Press “Component” to choose Component

video source.

Menu

Press “Menu” to launch the on-screen

display (OSD) menu. To exit OSD, Press

”Menu” again.

19

English

User Controls

Remote Control

Page -

Use the button to page down.

Zoom

Zoom the projector display in or out.

HDMI

Press “HDMI” to choose source from

HDMI connector.

Freeze

Press “Freeze” to pause the screen image.

Press this button again to unlock.

Blank

Momentarily turn off the video. Press this

button again to unlock.

S-Video

Press “S-Video” to choose S-Video source.

VGA

Press “VGA” to choose VGA source.

Four Direc-

tional Select

Keys

Use to select items or make

adjustments to your selection.

Video

Press “Video” to choose Composite video

source.

20

English

User Controls

The Projector has multilingual On-screen Display menus

that allow you to make image adjustments and change a

variety of settings. The projector will automatically detect

the source.

How to operate

1. To open the OSD menu, press “Menu” on the Remote Control or

Projector Keypad.

2 When OSD is displayed, use

keys to select any item in the

main menu. While making a selection on a particular page, press

or “Enter” key to enter sub menu.

3. Use

keys to select the desired item and adjust the settings

by

key.

4. Select the next item to be adjusted in the sub menu and adjust as

described above.

5. Press “Enter” to conrm, and the screen will return to the main

menu.

6. To exit, press “Menu” again. The OSD menu will close and the

projector will automatically save the new settings.

On-screen Display Menus

Main Menu

Sub Menu

Setting

Page is loading ...

Optoma EX330 User manual

Optoma EX330 User manual

Related papers

Other documents