SUPERTHIN
LARGE FLAT MOUNT
SECURE, EASY TO INSTALL, ULTRALOW PROFILE MOUNT
INSTALLATION MANUAL
AND WARRANTY
42
"
-63
"
(106-160cm)
150
lbs.
(68.04kg)
2
This SuperThin mount is designed to mount 42"– 63"
(106 – 160 cm) flatscreen televisions to vertical walls.
Maximum weight capacity is 150 lbs. (68.04 kg).
SUPERTHIN
LARGE FLAT MOUNT
Before installing, carefully review the instructions
to ensure that no parts are missing or defective.
Improper installation can cause damage or serious
injury. Do not use this product for any purpose not
explicitly specified by Monster or the manufacturer.
Neither Monster nor the manufacturer can be liable
for damage or injury caused by incorrect assembly,
incorrect mounting or incorrect use.
All hardware is supplied for the following wall
conditions: Wood stud, brick, solid concrete and
concrete block.
Note: The supplied hardware is not for steel stud
walls. If you are uncertain about the nature of your
wall construction, consult an installation contractor.
SAFETY WARNING
If you don’t understand these directions, or are
unsure of how to install this product installation,
please call a qualified contractor or contact Monster
Cable Products, Inc.
If you bought the Product in the United States, Latin
America (Mexico 011-882-800-8989), or Asia Pacific
(China 400-820-8973), contact Monster, LLC (455
Valley Drive, Brisbane, CA 94005) at 1 877 800-8989.
If you bought the Product anywhere else, contact
Monster Technology International Ltd., Ballymaley
Business Park, Ennis, Co. Clare, Ireland. You can write
or use one of the following telephone numbers:
Canada 866-348-4171, Ireland 353 65 68 69 354,
Austria 0800296482, Belgium 0800-79201, Czech
Republic 800-142471, Denmark 8088-2128, Finland
800-112768, France 0800-918201, Germany
0800-1819388, Greece 00800-353-12008, Italy
800-871-479, Netherlands 0800-0228919, Norway
800-10906, Russia 810-800-20051353, Spain
900-982-909, Sweden 020-792650, Switzerland
0800834659, United Kingdom 0800-0569520.
Important Notice
Monster intends to make this manual accurate and
complete, however, Monster makes no claim that
the information contained herein covers all details,
conditions or variations, nor does it provide for
every possible contingency in connection with the
installation or use of this product. The information
contained in this document is subject to change
without notice or obligation of any kind. Monster
makes no representation of warranty, expressed
or implied, regarding the information contained
herein. Monster assumes no responsibility for
accuracy, completeness or sufficiency of the
information contained in this document.
3
32.78" (83.25cm)
16.54" (42cm)
11.81" (30cm)
8.86" (22.5cm)
 0.327" ( 0.83cm)
R 0.165" (R 0.42cm)
0.41" (1.05cm)
3.94" to 28.74" (10cm to 73cm)
3.94" to 32.68" (10cm to 83cm)
4.92" to 15.75" (20cm to 40cm)
0.98" (2.5cm)
0.49" (1.25cm)
3.94"
(10cm)
3.94"
(10cm)
3.44"
(8.75cm)
1.97"
(5cm)
16.54" (42cm)
Specifications and Notes
VESA
100×100 / 200×100 / 200×200 / 300×300 / 400×200 / 400×400 / 600×400 / 800×400 Compliant
Monster is constantly striving to improve its products. Specifications are subject to change without notice.
4
4 Concrete Anchors 4 Lag Bolts
4 Round Washers
Package Contents
If any parts are missing, please call the appropriate Monster number for your location.
See page 2 for phone numbers.
1 Wall Mounting Plate
4 Rectangular
Washers
4 Spacers
2 Vertical
Adjustment Bars
Screws
4 each M5×10 / M5×15 / M5×25
4 each M6×10 / M6×15 / M6×25
4 each M8×10 / M8×15 / M8×25
1 Cardboard
Installation Template
1 Electronic
Studfinder
1 Bubble Level
5
WARNINGS
A WARNING alerts you to the possibility of serious
injury or death if you do not follow the instructions.
(1) DO NOT install on a sloping surface. Install
exclusively on a vertical surface.
(2) DO NOT mount to cabinetry made of
particleboard.
(3) DO NOT install in a room with excessively high
temperatures or high humidity. Install at least 3 ft.
from all water sources. Refer to TV manufacturer’s
manual for specific information regarding
temperature and humidity.
(4) DO NOT install near an air conditioner.
(5) DO NOT install in a location where there is
excessive dust, smoke or moisture. These sources
can create a fire.
(6) NEVER apply unnecessary stress or load on the
installed unit. Never hang on the unit.
(7) DO NOT install unit alone. Safe installation
requires at least two people.
(8) DO NOT route your flatscreen TVs power cord
in wall. Check local building/electrical codes for
more information.
(9) DO NOT over tighten screws or bolts. This can
damage the wall plate or the surface of your wall.
Thread screws or bolts carefully by hand before
tightening. If you feel any resistance, remove the
screw or bolt immediately.
(10) DO NOT release the wall plate until you are
absolutely sure it is secured to the wall.
Important!
Read Before Installing
CAUTIONS
A CAUTION alerts you the possibility of damage or
destruction of equipment if you do not follow the
corresponding instruction.
(1) To prevent eye fatigue, do not install where there
is direct sunlight or excessive light.
(2) When carrying out maintenance, disconnect the
TVs power supply to avoid electrical shock.
(3) If planning to route AV cable in wall, only use
cable that is approved for this use.
Masonry Mounting
While masonry materials (bolts and concrete
anchors) are included, masonry mounting requires
specialized knowledge, skills and tools. Monster
highly recommends that you seek the assistance of
a professional installer when mounting to masonry.
DO NOT drill holes in masonry mortar joints.
6
Required Tools
Wall Stud Mounting
Level (included)
Electronic studfinder (included)
Electric hand drill
³
₁₆
" drill bit
Phillips screwdriver
Wrench or socket set
Masking tape
Masonry Mounting
(brick, concrete, concrete blocks)
Above tools
Replace
³
₁₆
" drill bit with ½" masonry drill bit
Hammer
Pre-Installation Checklist
For wood stud mounting, your mounting
location must have at least two wall studs.
Your view of the mounting location must be
free of glare or other obstructions.
Your mounting location must be near an AC
power outlet. Ideally the outlet should be
behind your TV. This allows you to conceal your
display’s power cord.
Your mounting location must be at least 3 ft.
from any source of heat or water.
TIP: To hide your TVs power cord and AV cables,
install a Monster FlatScreen
CleanView
Cable
Manager.
7
Wood Stud Mounting
An electronic studfinder is included. Remove
plastic tab on the back of the studfinder to activate
battery. To locate a wall stud, hold the studfinder
against the wall where you want to mount your TV.
Push down the button on the studfinder and slide
the studfinder along the wall until the indicator
light goes on.
1
Locate two adjacent wall studs at least 12"
(31.5cm) apart at your desired mounting
location.
2
Position the supplied cardboard template
over the stud and tape template to wall with
masking tape. Make sure the template is level by
using the supplied bubble level.
Installing the Wall Mounting Plate
Remove all pieces of the wall mounting system to
ensure you have all necessary parts.
8
Wood Stud Mounting (contd)
4
Position the wall mounting plate over the holes
drilled in the wall studs.
3
With your electric drill and
³
₁₆
" bit, pre-drill
a 3" deep hole where indicated on template.
After drilling holes, remove template from wall.
5
Make sure the wall plate is level by using the
supplied bubble level. Place the provided level
on the wall plate and confirm that the wall plate is
horizontally straight. Hold the plate firmly in place.
9
Wood Stud Mounting (contd)
6
With the help of another person, attach the
wall plate to the wall using the lag bolts and
round washers as shown to the right. Tighten each
bolt with your wrench. Turn clockwise until secure.
Continue to page 13 to continue your installation.
DO NOT over tighten bolts. This can
damage the wall plate or the surface
of your wall.
DO NOT release the wall plate until
you are absolutely sure it is secured
to the wall.
10
Masonry Mounting
Masonry mounting requires specialized knowledge,
skills and tools. Monster highly recommends that
you seek the help of a professional installer when
mounting to masonry.
1
Position the supplied cardboard template in
the desired location and tape template to wall
with masking tape. Make sure the template is level
by using the supplied bubble level.
2
With your electric drill and ½" masonry bit,
pre-drill a 3" deep hole where indicated by
template. Be careful not to drill into a mortar joint.
After drilling holes, remove template from wall.
DO NOT drill holes in masonry
mortar joints.
11
Masonry Mounting (contd)
4
Position the wall mounting plate over the holes
drilled in the wall.
3
Install the supplied plastic concrete anchors
in each hole. Tap into hole with hammer until
fully seated.
5
Make sure the wall plate is level by using the
supplied bubble level. Place the level on the
wall plate and confirm that it is horizontally straight.
Hold the plate firmly in place.
12
Masonry Mounting (contd)
6
With the help of another person, attach the
wall plate to the wall using the lag bolts and
round washers as shown to the right. Tighten each
bolt with your wrench. Turn clockwise until secure.
DO NOT over tighten bolts. This can
damage the wall plate or the surface of
your wall.
DO NOT release the wall plate until
you are absolutely sure it is secured to
the wall.
13
Attaching Your Flatscreen TV
to the Vertical Adjustment Bars
1
Locate the threaded inserts on your TV’s back
panel. Thread a screw from the set by hand into
one of the inserts to ensure it is the correct choice.
2
Thread screws through the adjustment bars
into the TV inserts with the appropriate spacer
and washer set, if needed.
3
With a Phillips screwdriver, tighten the screws
so the adjustment bars are securely attached
to the TV.
Your mounting system features 9 sets of screws of
varying diameter and length. Before attaching the
vertical adjustment bars to your display, determine
which screw set is correct for your display.
TVs with flat backs use a shorter screw without
a spacer. TVs with curved backs or recessed
inserts may require a longer screw with a spacer
between the TV and adjustment bars. Smaller M5
or M6 screws require a square washer (supplied)
between the adjustment bar and each screw.
DO NOT lay your TV face down when
attaching the TV mounting plate. This
can cause permanent damage to your
screen. Lean it against a wall or other
solid surface so it remains vertically
upright.
DO NOT over tighten screws. Thread
screws carefully by hand before
tightening. If you feel any resistance,
remove the screw immediately.
The television should be unplugged
before threading any bolt or screw into
the back panel.
14
Hanging Your Flatscreen TV and
Vertical Adjustment Bars on the Wall Plate
2
With the help of another person, lift your TV
up to mount level. Raise the TV just above
the wall mounting plate. Slide the TV and vertical
adjustment bars down onto the wall mounting
plate until the top hooks of the vertical adjustment
bar engage the wall mounting plate. Gently
push the bottom of the TV to engage the locking
mechanism to the bottom of the wall mounting
plate. You’ll hear a click when the locking
mechanism engages, indicating that the TV is now
securely locked on the wall plate.
1
Connect the TV’s power cord and any AV
cables to the TV before hanging it. Plug the
TVs power cord into a nearby AC outlet. If routing
AV cable in wall, run it through the prepared
opening in your wall.
15
Removing Your Flatscreen TV
from the Wall Plate
Note: A cord is attached to the bottom of each
vertical adjustment bar. If it is necessary to
remove the TV for any reason, pull the cords on
both bars to release locking mechanism. While
pulling on the cords, have a friend lift the TV up
to from the wall mounting plate. Hang the excess
cord behind the TV. It’s OK to cut the cord to fit
behind the TV, but make sure to leave enough to
release locking mechanism.
Congratulations
You’ve successfully installed your Monster SuperThin
FlatScreen Mount.
Visit us at www.MonsterCable.com/FlatScreen for more innovative Monster FlatScreen products.
16
More Great Products from Monster FlatScreen
Get the Look You Want and the Performance You Need.
For more details on all our Monster FlatScreen products, visit us at MonsterCable.com/FlatScreen
Safely clean your LCD or plasma flatscreen TV
without staining, streaking, or dripping. Ultra-soft
MicroFiber cloth won’t scratch delicate screen
coatings.
Monster FlatScreen Cleaning Kit
Conceal unruly cords and cables for a clean, sleek
look. Easy to install with paintable covers to match
any decor.
Monster FlatScreen CleanView
Cable Manager
Monster Flatscreen Cables are compact and flexible
for easy routing and installation. Exclusive Monster
patented technologies deliver the advanced
performance you need from your flatscreen TV.
Monster FlatScreen Cables
Protect your flatscreen TV from harmful surges and
spikes and maximize performance with Monster
Dual Mode Plus
surge protection and HD Clean
Power
®
filtering, designed specifically for HDTVs.
Monster FlatScreen PowerProtect
and PowerCenters
17
LIMITED WARRANTY FOR CONSUMERS
Monster, LLC, 7251 West Lake Mead Blvd., Las Vegas,
NV 89128, USA, [PLEASE NOTE THAT MONSTER DOES
NOT ACCEPT PRODUCTS SHIPPED TO THIS ADDRESS –
FOLLOW INSTRUCTIONS IN “HOW TO MAKE A CLAIM”
BELOW] (415) 840-2000 (“Monster”) extends You this
Limited Warranty. Statutory or common law may provide
You with additional rights or remedies, which shall not be
affected by this Limited Warranty.
DEFINITIONS
Adequate Use means use of the Product (i) within
a home or dwelling, (ii) for private (as opposed to
commercial) purposes, (iii) in conformance with all
applicable law, code or regulations (including without
limitation building and/or electrical codes), (iv) in
accordance with manufacturer recommendations and /
or instructions in the materials and documentation that
accompany the Product, and (v) if applicable, with proper
electrical grounding.
Authorized Dealer means any distributor, reseller or
retailer that (i) was duly authorized to do business in
the jurisdiction where it sold the Product to You, (ii) was
permitted to sell You the Product under the laws of the
jurisdiction where You bought the Product, and (iii) sold
You the Product new and in its original packaging.
“Formal Warranty Claim” means a claim made in
accordance with the section “Formal Warranty
Claims” herein.
“Product” means a Product (i) that is listed in the
Specifications Table below, (ii) that You bought from an
Authorized Dealer new and in its original packaging, and
(iii) whose serial number, if any, has not been removed,
altered, or defaced.
“Product Defect” means an inadequacy of the Product
that existed at the time when You received the Product
from an Authorized Dealer and that causes a failure of
the Product to perform in accordance with Monster’s
documentation accompanying the Product, unless
such failure has been caused completely or partly by
(a) any use other than Adequate Use, (b) transportation,
neglect, misuse or abuse by anyone other than
Monsters employees; (c) alteration, tampering or
modification of the product by anyone other than
a Monster employee; (d) accident (other than a
malfunction that would otherwise qualify as a Product
Defect); (e) maintenance or service of the Product by
anyone other than a Monster employee; (f) exposure
of the Product to heat, bright light, sun, liquids, sand or
other contaminants; or (g) acts outside the control of
Monster, including without limitation acts of God, fire,
storms, earthquake or flood.
“Warranty Period” means the time period during which
Monster must have received Your Formal Warranty
Claim. The different Warranty Periods related to Product
Defects are defined in the Specifications Table below.
The Warranty Period commences on the date when
You purchased or received (whichever occurs later) the
Product from an Authorized Dealer as evidenced by the
Authorized Dealer’s invoice, sales receipt or packing slip.
If You do not have written proof of the date of purchase
or receipt, then the Warranty Period commences
three (3) months after the date when the Product left
Monsters or its factory as evidenced by Monsters
records. The Warranty Period ends after the time defined
in the Specifications Table has expired or after You have
transferred ownership of the Product, whichever occurs
earlier. Also, You must call Monster and obtain a Return
Authorization Number (as described under “How to
Make a Claim”) within two (2) months after You discover
a Product Defect (or should have discovered it, if such
Product Defect was obvious).
You means the first individual person that purchased
the Product in its original packaging from an Authorized
Dealer. This Limited Warranty does not apply to
persons or entities that bought the Product (i) in used
or unpackaged form, (ii) for resale, lease or other
commercial use, or (iii) from someone other than an
Authorized Dealer.
SCOPE OF THIS LIMITED WARRANTY
PRODUCTS. If a Product contained a Product Defect
when You bought it from an Authorized Dealer and
Monster receives a Formal Warranty Claim from You
within two (2) months after You discover such Product
Defect (or should have discovered it, if such Product
Defect was obvious) and before the end of the Warranty
Period for Product Defects applicable to the affected
Product, then Monster will provide You with one of the
following remedies: Monster will (1) repair or, at Monsters
sole discretion, replace the Product, or (2) refund to You
the purchase price You paid to the Authorized Dealer
for the affected Product if repair or replacement is not
commercially practicable or cannot be timely made.
NOTE: MONSTER DOES NOT ASSUME ANY LIABILITY
FOR ANY INCIDENTAL, CONSEQUENTIAL OR INDIRECT
DAMAGES UNDER THIS LIMITED WARRANTY.
GENERAL PROVISIONS
CHOICE OF LAW/JURISDICTION. This Limited Warranty
and any disputes arising out of or in connection with this
Limited Warranty (“Disputes”) shall be governed by the
laws of the jurisdiction where You bought the Product.
OTHER RIGHTS. THIS LIMITED WARRANTY GIVES YOU
SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE
OTHER RIGHTS, WHICH VARY FROM JURISDICTION TO
18
LIMITED WARRANTY FOR CONSUMERS (contd)
JURISDICTION, AND WHICH SHALL NOT BE AFFECTED
BY THIS LIMITED WARRANTY. THIS WARRANTY EXTENDS
ONLY TO YOU AND CANNOT BE TRANSFERRED OR
ASSIGNED. If any provision of this Limited Warranty is
unlawful, void or unenforceable, that provision shall be
deemed severable and shall not affect any remaining
provisions. In case of any inconsistency between the
English and other versions of this Limited Warranty, the
English version shall prevail.
REGISTRATION. Please register Your Product at
www.monstercable.com. Failure to register will not
diminish Your warranty rights.
SPECIFICATIONS TABLE
Product Model Warranty Period
for Product
Monster Flatscreen Superthin
Large Flat Mount Lifetime
”Lifetime means the lifetime of the original individual
purchaser of the Product, or for as long as the original
individual purchaser owns the Product, whichever is
less in time.
FORMAL WARRANTY CLAIM
HOW TO MAKE A CLAIM. In the event damage has
occurred to Products, You must follow these instructions:
(1) Call Monster within two (2) months after You
discover a Product Defect (or should have discovered
it, if such Product Defect was obvious); (2) Give a
detailed explanation of how the damage occurred;
(3) Obtain a Return Authorization Number; (4) Return
the Products, shipping prepaid by You (to be refunded
if You are entitled to a remedy under the Scope of this
Limited Warranty), to Monster for verification of damage,
along with a copy of Your original sales receipts and
proof of purchase (UPC label or packing slip) for such
Products, the completed claim form, and printed Return
Authorization Number on the outside of the return
package (the claim form will include instructions
for return).
TELEPHONE NUMBERS. If You bought the Product
in the United States, Latin America (Mexico
011-882-800-8989), or Asia Pacific (China 400-820-
8973), contact Monster, LLC (455 Valley Drive, Brisbane,
CA 94005) at 1 877 800-8989. If You bought the
Product anywhere else, contact Monster Technology
International Ltd., Ballymaley Business Park, Ennis, Co.
Clare, Ireland. You can write or use one of the following
telephone numbers: Canada 866-348-4171, Ireland
353 65 68 69 354, Austria 0800296482, Belgium
0800-79201, Czech Republic 800-142471, Denmark
8088-2128, Finland 800-112768, France 0800-918201,
Germany 0800-1819388, Greece 00800-353-12008, Italy
800-871-479, Netherlands 0800-0228919, Norway
800-10906, Russia 810-800-20051353, Spain 900-982-909,
Sweden 020-792650, Switzerland 0800834659, United
Kingdom 0800-0569520.
FURTHER PROCEEDINGS. Monster will determine
whether a Product Defect existed. Monster may, at its
discretion, direct You to obtain a repair estimate at a
service center. If a repair estimate is required, You will be
instructed on how to properly submit the estimate and
the resulting invoice to Monster for payment. Any fees for
repairs may be negotiated by Monster.
TIMING. If You bring a Formal Warranty Claim and fully
comply with all terms and conditions of this Limited
Warranty, Monster will use its best efforts to provide
You with a remedy within thirty (30) days after receipt of
Your Formal Warranty Claim (if You reside in the United
States - forty-five (45) days if You reside elsewhere), unless
obstacles outside Monsters control delay the process.
Ver.021710 – GLOBAL ©2003–2011 Monster, LLC
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI