Page is loading ...
FJW70A11P
USER’S
Automatic
Notes
2
5
7
8
11
12
13
15
16
17
18
1
Contents
Read the following items in order to prevent personal injuries and property damage:
Please read the following icons.
！
！
！
！
Warning
Warning
Caution
This indicates that serious injuries or loss of life may
be caused.
This indicates that bodily injuries or property damage may
be caused.
Please do not directly rinse the
machine with water when
cleaning.
Please do not install the washing
machine under damp or raining
environment to avoid electric shock,
fire, failure or accidents.
No dismantling
No touching
No dampness
No rinsing
!
This icon indicates [operation prohibited].Detail prohibitive actions are
shown inside.
This icon indicates a warning or reminder note].Detail warnings are
shown inside.
[
This icon indicates Detail actions are
shown inside.
[forcible execution], forcible
Please do not disassemble
or assemble the washing
machine without
authorization.
Please do not touch the
spin barrel before
it is fully stopped.
2
Safety precautions
Safety precautions...............................................................................
Installation of the washing machine.......................................................
Preparation before washing..................................................................
Parts identification of the ............................................washing machine
Instruction of the operation panel................................washing machine
Quick start..........................................................................................
The main wash functions.......................................................................
Special features..................................................................................
About the procedure of fully automatic wash program.................................
Cleaning and Maintenance of the washing machine..............................................
Troubleshooting of washing machine.....................................................................
Malfunction display and solutions..........................................................
Technical specifications................................................................................
9
18
1. This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning use of the appliance by a
person responsible for their safety.
2. Children should be supervised to ensure that they do not play with the appliance.
3. If the power cord is damaged, it must be replaced by the manufacturer, its service agent
or similarly qualified persons in order to avoid a hazard.
4. The new hose-sets supplied with the appliance are to be used and that old hose-sets
should not be reused.
5. The openings must not be obstructed by a carpet.
Fortress service department page .............. ..........20.................................
Please do not let children climb the
machine or peer into the rotating
spin barrel to avoid accidents.
It is prohibited to wash items
contaminated with kerosene,gasoline,
alcohol and other flammable
substances.
Please do not damage power cord
and plug to avoid electric shock,
short circuit or fire.
Regularly clean the power plug to
remove dust and dirt to avoid contact
failure.
Please unplug the plug from the
if the machine is not in use.socket
Please well connect the earth line of
socket to avoid electric shock by
accidental leakage.
Please plug the firmly.plug
！
!
!
Prohibited
Warning
Prohibited
Smoke and fire prohibited
Earthing
Pull out the plug
Warning
Please do not place lighted candles,
incense, cigarettes and other
flammable items such as electric stove,
heating fan or other
heat sources on top of
the washer.
3
Please use 220V power source
.
Please do not plug-in or unplug the
plug with wet hands to avoid electric
shock.
Please ensure that the water inlet pipe
is connected and the tap is turned on
before washing
clothes.
Users are not allowed to change
the power cord without permission.
It is strictly prohibited to place
children or lay
weights on the
washer.
Please do not pull the power cord
when unplug the
plug.
Please do not wash down jacket,
raincoat, fishing coat and waterproof
items in the
washer.
！
!
!
!
Wet hands are
prohibited
+
+
>50 C
The water temperature should not
50 when washing
with warm water.
exceed ℃
Prohibited
Prohibited
Prohibited
Prohibited
Caution
4
！
Remove package
!
!
!
Remove the package. Take out the washing machine
and place it on the protective foam cover.
Open the lid of washer's door and take out accessories.
A trial operation or washing on the protective foam base
is strictly forbidden.
Base foamed cushion
5
Installation of water inlet hose
6
Installation of the washing machine Installation of the washing machine
Installation of drain hose
!
!
Completely sleeve the drain
hose over the sewer.
Fix and tighten it with a hoop.
( As shown in the figure )
at
Before washing, please take out coins,
keys and other hard items, and zip up clothes
to prevent washing items and barrel from
damage.
7
Accessories
8
Preparation before washing Parts identification of the washing machine
！
！
NOTICE
Adjust the adjustable foot to place
the washer stably.
1
Adjustable foot (extend when
clockwise rotating and shorten
when counterclockwise rotating)
(Slightly incline the washer first and loosen the
adjustable foot knob. Adjust the adjustable foot so
as to ensure four corners of washer be steadily
contacted with the ground. Then tighten the
adjustable foot knob and lock it. If the ground is
obviously rough and uneven, correction should be
made on the ground surface, otherwise the
washer barrel will incline and knock the cabinet)
Install the water
inlet hose.
2
+
+
single inlet hose
Connect with
power source.
3
4
Turn on the
water tap.
+
+
Put down the drain
house.
5
Gravity drain
Upper drain
Note:
The water
will overflow
when the
height of
the drain
hose under
750mm.
>750mm
Put in
clothes
and
suitable
amount of
washing
powder.
6
Inlet hose Upper drain hose
Water inlet valve
Filtering bag
Bleacher inlet
Control panel
Handle of lid
Handle
Power cord
Adjustable
foot knob
Cabinet
Impeller
(Back of lid)
Upper drain hose
Before starting, continuously press this button for switching over
among [Soak], [Normal], [Heavy], [Speedy], [Child],[Tub clean] ,
[Air Dry] program.
The POWER button can turn on or off
the washer.
[Wash], [Rinse] and [Spin], these three buttons represent different
washing process. Continuously pressing [Wash] button can change
the washing time. Press [Rinse] button can select number of rinse.
Press [Spin] button can determine the spinning duration.
[Start / Pause] button has both functions of start
and pause. Continuously press this button, the
machine will be switched between start and
pause mode.
User can set the preset duration from 1 hour
to 24 hours. After the time you set
runs out, this machine will start to work with
the set program.
Instruction of the operation panelwashing machine
Preset Selection
Program SelectionWash Rinse Spin
Children Lock
Start / Pause
Power Switch
FJW70A11P
()
()
()
()
()
10
PRESET TIME HOUR()
REMAIN TIME MIN()
/ !"
#$
%& ' * +,-.8
9:
;<3;<3
Water level is divided into [Wash level] and [Rinse level]. this
button is used to select and change water level. Continuously
pressing the button, the figures circularly display will be varied
from 1 to 10. According to the setting of this washer [Rinse
level] is higher than [Wash level].
Water Level Selection
Finish washing
Programme selection
1 Install the washing
machine
3 measure the
detergent
7 Plug the power
cord
6 Turn on the water tap
8 Select the desired
programme
5 Hang the drain pipe
4 Close the of
washing machine
door
9 Press the
[start/pause] button
11
When the wash stops, the buzzer will buzz continuously for 6 times and
then the power will be automatically cut off.
Turn off the water tap.
Although the power can be cut off automatically, unplug the washer for safety.
1
Press the POWER button.
3
Press the start/pause button.
2
Select the proper water level or other attached functions.
2 Load the laundry
Instruction to the NORMAL program
Instruction to single wash procedure
Instruction to customized program
Steps in detail
1.Press the power switch.
2.Choose the suitable water level according to the washing amount.
3.Press START/PAUSE button.
12
!
!
[Normal] wash program is the easiest, most convenient and most common washing
program. When the user press the power switch and then press [Start/Pause] button,
the normal washing program will start to work.
When the washer starts to work, the digital display shows the remaining time. The indicator
indicating the remaining time will be flashing.
!
!
!
User can freely select any single procedure, or any combination of procedures among
WASH, RINSE and SPIN according to their needs. It is only required to turn
off any one or two of these three indicators that is not needed by the user. And keep the
indicator showing the process selected.
Single wash -- after switching on the power, turn off RINSE and SPIN two indicators
by pressing these two buttons. The operation for single rinse and single spin is similar.
Single wash-spin – after turning on the power, turn off RINSE indicator by pressing
that button.
! User can freely select any combination among WASH, RINSE and SPIN modes
according to the dirty situation of clothes.
Detail operating details are as follows:
Continuously press the WASH button to select washing durations.
(1~20 minutes, or no wash process)
Continuously press the RINSE button to select rinse times.
(1~3 times, or no rinse process)
Continuously press the SPIN button to select the spin .
(3~9 minutes or no spin process)
durations
Quick start
The main wash functions
!
!
!
!
Close the door lid when washer is running, otherwise, it will stop functioning automatically
during the spinning process and send out abnormal warming.
The washer will not work when the filled water does not reach the set water level.
The selection of rinse water level: the level is equal to wash water level.
Press [Rinse] button, the indicator for rinse level flashes.
User can select the rinse water level according to needs. Rinse level should exceed
wash level all the time. It shows the wash level if this button is not pressed.Rinse level
is only shown when rinsing.
After pressing [ Power Switch ], if the [Start / Pause ] button is not pressed,
the power will be automatically cut off after 10 minutes.
NOTICE
！
PRESET
This washing machine has the functions of preset within 24 hours.
After the PRESET program start to work, the digital display shows the preset starting time.
The indicator for preset is on. It goes off at the preset time. The indicator
for remaining time is then on,showing the remaining time.
The PRESET time stands for washing program will be on after [XX] hours.
SPEEDY
CHILD
HEAVY
the less dirtied clothesSPEEDY program is used for washing and the whole
washing process will be completed in about 26 minutes.
CHILD program is used for washing the dirtied children clothes and the whole
washing process will be completed in about 57 minutes.
HEAVY program is used for washing dirtied clothes and the whole
washing process will be completed in about 46 minutes.
13
SOAK
SOAK program is used for washing dirtier clothes. This program can be used
in conjunction with other programs except TUB CLEAN.
14
Special features Special features
TUB CLEAN
Water quality and pollution problem on both sides of the tub caused by residues of
washing powder can be cleaned by the TUB CLEAN program.Contaminated with residues
may lead to unpleasant smell and lead to disfunction of drainage.Residual dirt may be
released during the process,resulting in dirtier clothes when washing.
Users should clean the tub every month.
AIR-DRY can dry clothes through cold wind formed by high speed rotation of the inner
barrel.User may select to enter air-dry after spin, to cut down the drying time of the clothing.
Press PROGRAM button until SOFT and TUB CLEAN's indicator light bright at the same time.
Then AIR-DRY program has been selected.
AIR DRY
! Please do not turn this program on continuously.
! You can add chloric bleacher to enhance the effect of tub clean.
! This program is used for cleaning the barrel only.Do not put clothes on.
！
NOTICE
No
washing
Abnormal
draining
Abnormal
spin
Troubleshooting of washing machine
List of faults and inspection
Faults
Inspection Items
No water
flows in
!
!
!
!
!
!
If the power is off or the fuse is burned .
If the water supply is cut off or the water pressure is too low
.
If the inlet hose is connected improperly and the water tap is turned on.
If the filtering screen of inlet valve is blocked by dirt.
If the coil of inlet valve is damaged. (The slight electromagnetic
sound is phenomenon when the inlet valve is opened)
If the "Start / Pause" button is pressed after the power
switch on.
!
!
!
!
If the door lid is not closed.
If all clothes are piled at one side of barrel and there are too many clothes.
If the washing machine is not placed in a stable condition or is tilted.
(The ground is not flat).
If the motor belt is loosened.
Note: During the spinning process, if washing are piled at one side of the spin barrel,
it will cause unbalance of the spin barrel and resulting in striking.
At this moment, the
built-in computer of the washer can detect this unbalance situation and will automatically
correct it ( fill in water W
ashing ). However
, if the unbalance situation is not removed after
continuous three corrections, The user has to manually place the clothes inside the barrel
evenly.
When problems of the washing machine arise, please contact local service office or the
sales service department of our company and users should not dismantle the
washing machine without permission.
If the washer cannot function normally, or there are abnormity signals, please check and
correct as follows.
!
!
!
If the water drain hose is placed too high.
If the end of water drain hose is not connected to the collection tank.
If the internal rubber ring of the drainage valve is blocked by dirt.
!
!
!
!
If the power is off or the fuse is burned .
If the power supply voltage is too low.
If the water amount reaches the required water level.
(The washer will not work if the water amount does not reach the
required water level)
If it is set to "Preset" washing mode. (It will only start to work
at the preset time)
17
Malfunction display and
solutions
When problems of the washing machine happen, please contact local service office or the
sales service department of our company and users should not dismantle the machine
without permission.
If the washer cannot function normally, and the abnormal indicator is shown on the
display window or the machine alarms, please check and correct as follows.
18
Technical specifications
220V / 50Hz
Rated power supply
460W
Input power
7.0kg
Rated washing capacity
7.0kg
Rated spin capacity
X
X
550 565 918mm
(W*D*H)
Overall dimensions
Water pressure
39
kg
Gross weight
0.03MPa
0.8MPa-
W
ashing mode
New water flow
Draining mode
Spin mode
Centrifugal spin
Gravity drain
1. Cut off power and start it 5 minutes later.
2.
After re-start, the problem still keep-in;
please report to repairing.
1. Turn on the water tap. 2. Hydraulic pressure is low
,
increase inlet water amount.
Check if water drainage hose is placed
correctly. Clean the stem.
Display
Causes
Methods
Alarm for abnormal
water intaking.
Alarm for water drain has
not finished.
Alarm for lid not closed
before spin.
Alarm for the power cut
off failed.
Please close the door lid.
Report for repairing.
Alarm for water level sensor.
Alarm for reading EEPROM
failed.
Alarm for washing stay at
one side.
Placed the washing equably.
Report for repairing.
The power cut off automatically
.
Please choose 220V power source.
High voltage
protection 270 10V≥
20
Warranty
Important Notices
1. The product has 3 years warranty from
the date of purchase.
2. The warranty shall not apply:
A. to any Product subjected to accident, misuse, neglect, alteration, Acts of God,
Improper handling, improper transport, improper use, improper testing or
unauthorized repair;
B. to cosmetic problems or defects which result from normal wear and tear under
ordinary use, and do not affect the performance or use of the product.
All warranties are void if the product is opened, altered, and/or damaged;
C. to any packing, transportation, export / import tax or any related expenses.
3. CUSTOMER MUST PRESENT THE SALES INVOICE OR RECEIPT FOR 3
YEARS
WARRANTY SERVICES.
4. Request for service should be made to our service department.
Service Hotline : (852) 2555 5788
5. THE UNIT IS FOR DOMESTIC USE ONLY.
THE UNIT IS FOR DOMESTIC USE ONLY
IN NO EVENT SHALL OUR COMPANY OR THE SUPPLIER BE LIABLE TO
YOU OR ANY OTHER PARTY FOR ANY DIRECT, INDIRECT, GENERAL
SPECIAL, INCIDENTAL, CONSEQUENTIAL, EXEMPLARY OR OTHER
DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE
PRODUCT (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR INJURY,
LOSS OF PROPERTY, BUSINESS PROFITS, BUSINESS INTERRUPTION)
OR FROM ANY BREACH OF WARRANTY, EVEN IF OUR COMPANY OR
SUPPLIER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
IN NO CASE SHALL OUR COMPANY OR SUPPLIER'S LIABILITY EXCEED
THE AMOUNT YOU PAID FOR THE PRODUCT.
Specifications, designs and dimensions subject to change without prior notice.
19
/
