Schwaiger DSR 4007 User manual
- Category
- TV set-top boxes
- Type
- User manual
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
User’s Guide
Digital Terrestrial Receiver
MODEL: DSR 4007
Before connecting and operating this product,
Please read this instruction booklet carefully
and completely
GB
DSR 4007_eng_6.26 6/27/02 4:28 PM Page II
GB-2 Digital Terrestrial Receiver - - Digital Terrestrial Receiver GB-3
• Fully MPEG2, DVB compliant.
• Digital Audio with AC-3 support by SPDIF.
• PIG (Picture In Graphic) support.
• Provide friendly and easy-to-use menu system.
• Various channel editing function.
(favorite, moving, locking, renaming, deleting and sorting).
• Full Automatic Search for Short Time(Selectable Frequency Interval).
• Easy Manual Search (No need to select Guard Interval, Transmission Mode).
• Stores up to 5000 channels.
• Easy and speedy software upgrade through RS-232 port.
• Plug-and-play data transfer system (Receiver to Receiver).
• Timer function, automatically turns On/Off by setting function.
(daily, weekly, monthly and one time).
• Automatic reserved channel moving system.
• Provide Electronic Program Guide (EPG).
• OSD Teletext (DVB ETS 300 706) and Subtitle function support.
• VBI Teletext support.
• Selectable video output – CVBS, RGB.
• Provide NTSC/PAL monitor type.
• 256 colors On-Screen-Display.
• PAL/NTSC automatically conversion.
• Last channel automatically saving.
This user’s guide covers the installation of the Digital Terrestrial Receiver and
the necessary steps to operate various features. This also explains special features
available only in this Digital Terrestrial Receiver in detail, and will allow you to make full
advantage of these feature.
General Information
Main Feature of DSR 4007
This Receiver has been manufactured to meet international safety standards.
Please read all of the safety and operating instructions before operating the product.
And keep all safety and operating instructions for future reference.
1. Main Supply 90-250V AC, 50/60Hz.
2. Overloading Do not overload a wall outlet, extension cord, or adapter as
this may result in fire electric shock.
3. Liquids Do not expose the Receiver to rain or moisture.
4. Cleaning Disconnect the Receiver from the wall outlet before cleaning.
Do not use liquid cleaners or aerosol cleaners. Use a light damp
cloth for cleaning.
5. Ventilation The slots on top of the Receiver must be left uncovered to allow
proper airflow to the unit.
Do not stand the Receiver on soft furnishing carpets.
Do not expose the Receiver to direct sunlight or do not place it near
a heater. Do not stack electronic equipments on top of the Receiver.
6. Attachments Do not use any attachments not recommended by product
manufacturer as they may cause hazards.
7. Connection to the TV
Disconnect the Receiver from the mains before connecting or
disconnecting the cable from the TV.
FAILURE TO DO SO CAN DAMAGE THE TV.
8. Location Place the Receiver indoor in order to prevent potential damage from
lightning, rain, or direct sunlight.
9. Servicing Do not attempt to service this product yourself, as opening or
removing covers may expose you to dangerous voltage or other
hazards. Refer all servicing to qualified service personnel.
For Your Safety
General Information
DSR 4007_eng_6.26 6/27/02 4:28 PM Page 2
GB-4 Digital Terrestrial Receiver - - Digital Terrestrial Receiver GB-5
After purchasing the receiver, unpack it and check to make sure that all of the following
items are included in the packaging.
Unpacking
Throughout this manual you will notice that the everyday operation of your Receiver is
based on a series of user friendly on screen display and menus. These menus will help
you get the most from your Receiver, guiding you through installation, channel organizing,
viewing and many other functions.
All function can be carried out using the buttons on the RCU, and some of the function can
also be carried out using the buttons on the front panel.
If at any time when you using the menus you want to return to the normal TV mode,
press the TV/AV button.
The Receiver is easy to use, always at your command and adaptable for future advances.
Please be aware that new software may change the functionality of the Receiver.
Should you experience and difficulties with the operation of your Receiver, please consult
the relevant section of this manual, including the Problem Shooting, or alternatively call your
dealer or a customer service adviser.
General Operation
General Information
1 x Receiver
1 x Remote Control Unit 1 x User’s Guide 2 x AAA Batteries
General Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
For Your Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Main Feature of
DSR 4007
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Unpacking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
General Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Remote Control Unit (RCU) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Connecting to ANTENNA & TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Connecting to TV&VCR using SCART support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Connecting to TV using RCA support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Connecting to another receiver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Menu Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
User Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Auto Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Manual Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
System setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
Parental Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Factory Default . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
General Viewing Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
Select Channel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
Pause the frame . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
Previous channel recall . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
TV & Radio mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
TV & VCR mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Channel Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
Volume & Audio Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
Channel Manager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
Channel Manager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
Favorite . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
Move . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
Rename . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
Delete . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
Sort . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
Fast edit mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
Go To . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
EPG(Electronic Program Guide) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27
Time Adjust . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27
Time Reservation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27
Receiver Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
Front Panel Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
TroubleShooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
System Specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30
Contents
DSR 4007_eng_6.26 6/27/02 4:28 PM Page 4
Turns power ON/OFF.
Mutes the sound when
watching a channel.
~
Use to enter the required
menu item or select the
channel to watch.
TV/RADIO Switches TV and Radio mode.
PR Goes back to previous channel.
FAV Displays the favorite channel
list.
Moves up / down a page in
the channel list.
TV/AV Switches TV and AV mode.
MENU Press this key one time to run
menu on screen and
call command box.
INFO Shows information of the
current channel.
/
When watching a channel,
changes channels, or moves to
the next higher or lower item in
the menu.
When watching a channel,
adjusts the volume, or move to
the left or right item in menu.
OK, LIST Executes the selected item in
(
)
the menu screen, or enters the
desired value in any input mode.
EXIT Use to return to the previous
menu on the menu screen or
escape from the menu.
EPG Calls up the EPG(Electronic
Program Guide).
NOT USED
PAL/NTSC Switches between PAL or NTSC
mode.
AUDIO When watching a channel,
(Red) switches the audio languages.
(Blue) Switches audio left and right.
PAUSE Pause screen and audio
(Green) and then start recording in
Live mode.
(Yellow) Switches teletext and subtitle
mode.
21
20
19
18
17
16
15
14
LIST
OK
13
+
12
PR -
PR +
11
10
9
8
7
6
5
4
9
0
3
2
1
General Information
Remote Control Unit (RCU)
GB-6 Digital Terrestrial Receiver - - Digital Terrestrial Receiver GB-7
General Information
PR -
DSR 4007_eng_6.26 6/27/02 4:29 PM Page 6
Rear Panel
General Information
Front Panel
GB-8 Digital Terrestrial Receiver - - Digital Terrestrial Receiver GB-9
General Information
MADE IN KOREA
DIGITAL
AUDIO
POWER
90-250V~
50/60Hz,45W
VIDEO AUDIO-L
AUDIO-R ANT
TV/VCR
TV
RS232
LNB IN
600mA, 13/18V
LNB OUT
VCR
0/12V
MAX.100mA
1 3
4
2
7
8 11
8 9 105 6
POWER
90-250V~
50/60Hz,45W
VIDEOS-VHS AUDIO-L
AUDIO-R
DIGITAL
AUDIO
TV
RS232
ANT IN
ANT OUT
VCR
1 3
4
2
7 10
7 8 95 6
MENU OK ESC
1 2 35
6
4
Shows the main menu and command box on the screen.
Executes the selected item in the menu.
Returns to the previous menu on the menu screen.
Turns on or off the power of the receiver.
When watching, changing to the previous and next channel,
moves to the next higher or lower item in the menu.
When watching a channel, adjusts the volume or moves to
the left or right item in the menu.
MENU
OK
ESC
1
2
3
4
5
6
Power ON/OFF
AC Power Code
S-VHS This is used to connect STB to your
TV by using S-VHS cable.
Digital Audio Connect to Digital Amplifier.
Video Connect VIDEO to TV using RCA Jack.
Audio Connect to AUDIO R/L to TV or AUDIO tuner.
TV/VCR SCART Connect to TV and VCR using a SCART Cable.
RS232 Connect to a PC for S/W Upgrade.
ANT OUT To connect to the other receiver.
ANT IN To connect to a terrestrial antenna.
1
2
3
4
5
6
7
8
9
10
DSR 4007_eng_6.26 6/27/02 4:29 PM Page 8
Connecting to TV using RCA support
Installation
This section explains the installation of receiver. Refer to the manuals supplied with
the equipment for the installation of outdoor equipment. When adding new equipment,
be sure to refer to the related parts of the manual for the installation.
GB-10 Digital Terrestrial Receiver - - Digital Terrestrial Receiver GB-11
Installation
Connecting to ANTENNA & TV
POWER
90-250V~
50/60Hz,45W
VIDEOS-VHS AUDIO-L
AUDIO-R
DIGITAL
AUDIO
TV
RS232
ANT IN
ANT OUT
VCR
Connecting to TV & VCR using SCART support
POWER
90-250V~
50/60Hz,45W
VIDEOS-VHS AUDIO-L
AUDIO-R
DIGITAL
AUDIO
TV
RS232
ANT IN
ANT OUT
VCR
P
L
A
Y
R
E
C
OUT TO TV
ANT IN
IN
TV
Receiver
POWER
90-250V~
50/60Hz,45W
VIDEOS-VHS AUDIO-L
AUDIO-R
DIGITAL
AUDIO
TV
RS232
ANT IN
ANT OUT
VCR
TV
Receiver
Connecting to another receiver
POWER
90-250V~
50/60Hz,45W
VIDEOS-VHS AUDIO-L
AUDIO-R
DIGITAL
AUDIO
TV
RS232
ANT IN
ANT OUT
VCR
ANT IN
TV
Receiver
TV
Receiver
VCR
DSR 4007_eng_6.26 6/27/02 4:29 PM Page 10
This menu consists of 5 sub-menus as follows.
- Auto Search
- Manual Search
- System Setting
- Parental Lock
- Factory Default
To search a channel, please select User
Installation and then Auto Search or Manual
Search.
User Installation
You can search all Mux channel or selected
region which is possible in your location,
even though you don’t know the exact Mux
channel with Guard Interval.
Please select Search button on the screen and
then press OK key on the RCU.
Receiver will automatically search the channel
for TV and Radio and during this procedure
you can see the already searched channels in
the Auto Search Page on the screen.
If completed searching channel, cursor will be
placed on VIEW automatically, then press OK
button.
Auto Search
Once you properly installed and connected cables
of the Receiver, the menu will be displayed
This menu consists of 5 major main menus as
follow.
- Channel Manager
- Program Guide
- Timer
- User Installation
- Receiver Information
To move up and down, press “PR+ or PR-”.
To move left and right, press keys on
the RCU. Place cursor on the “User Installation”,
then sub-menu will be displayed on the screen.
+
Main Page
GB-12 Digital Terrestrial Receiver - - Digital Terrestrial Receiver GB-13
Menu Information
DSR 4007_eng_6.26 6/27/02 4:29 PM Page 12
System Setting menu provides variety of choice
which is matching to your environment.
1) OSD Language
Select your desired OSD language.
2) Audio Language
Select your desired audio language to be
in the top priority under the condition that
this language is supported from the channel.
3) Subtitle Language
Select your desired Subtitle Language.
4) Screen Format
If your TV supports 16:9 screen format and
selected channel provides 16:9 format
program, select 16:9.
5) Video Output
If your SCART supports RGB control,
select RGB. Otherwise select CVBS.
6) TV Type
Select the type according to your TV type.
7) Start On Channel
If you press OK key, then the channel list is
displayed. You can select one channel of the
list, the selected channel starts whenever you
turn on Receiver.
System setting
User Installation
When you know the exact Mux channel with
Guard Interval, you can choose Manual Search.
Select one Mux channel 5~12, 21~69 using
key or numeric keys on the RCU.
Select Search button on the screen and then
press OK key on the RCU.
Receiver will automatically search the channel
for TV and Radio.
During this procedure you can see the already
searched channels in the Manual Search Page
on the screen.
If completed searching channel, cursor will be
placed on VIEW automatically, then press OK
button.
+
Manual Search
GB-14 Digital Terrestrial Receiver - - Digital Terrestrial Receiver GB-15
User Installation
DSR 4007_eng_6.26 6/28/02 3:25 PM Page 14
How to use Install Lock
1) Enter the current password.
2) Select ON of Install Lock.
3) Enter new password.
4) Confirm your new password entering
new password again.
5) Exit this menu.
6) Select any menu and press OK on the RCU.
7) Then Enter Password Box will be displayed.
8) Unless enter correct password,
you can not run any menu.
N
N
o
o
t
t
e
e
:
:
Default password is 0000.
W
W
a
a
r
r
n
n
i
i
n
n
g
g
:
:
Do not forget your password in order
not to fail to operate Receiver.
If you want to bring Receiver back to the factory
default condition, select Factory Default and
press OK key.
Then Warning message will be displayed.
To confirm select OK and press OK.
W
W
a
a
r
r
n
n
i
i
n
n
g
g
:
:
You will lose all of data and
information which was installed.
User Installation
This function allows you to lock the channel with
your password in order to prevent from accessing
the channel by your children or any other person.
And also you can protect your installed data and
information using Install Lock.
How to change Password
1) Enter the current password.
2) Select ON of Parental Lock.
3) Enter new password.
4) Confirm your new password entering new
password again.
N
N
o
o
t
t
e
e
:
:
Default password is 0000.
W
W
a
a
r
r
n
n
i
i
n
n
g
g
:
:
Once you change password,
please do not forget and keep well.
How to use Parent Lock
1) If you want to activate the parental lock
function, go to the TV Channel Manager
Page.
2) Press MENU key to have a command box
and select Lock.
3) Select the channel which you want to Lock
4) Press OK, and symbol is marked.
Parental Lock
GB-16 Digital Terrestrial Receiver - - Digital Terrestrial Receiver GB-17
User Installation
Factory Default
DSR 4007_eng_6.26 6/27/02 4:29 PM Page 16
While watching a TV channel, press TV/RADIO
key on the RCU to move to the radio mode.
Press this key once again, and it will bring you
back to the TV mode.
TV & Radio mode
General Viewing Function
By pressing TV/AV key on the RCU, you can
change the mode from STB to TV or VCR.
Press once to move to the TV mode and LED
displays TV.
Press twice to move the VCR mode and LED
displays VCR.
Press three times to move back to STB mode
and LED displays the channel no.
TV & VCR mode
If you want to select a channel, use key on the
front panel, PR+, PR- keys or numeric keys on
the RCU. Then, press OK key on the RCU.
In addition to the above normal function,
provides more convenient channel change
function.
While watching, press OK key on the RCU or
front panel. Channel list will be displayed on the
center of the screen.
Three types of sorted channel lists(All, Favorite,
A~Z) are also shown on the left top of the screen.
You can select the channel list you want.
To select a channel, move the cursor up and
down on this channel list and place cursor on a
desired channel. Then, press OK key to watch
the selected channel.
Using keys on the RCU, you can move the
channel list up and down page by page.
Select Channel
GB-18 Digital Terrestrial Receiver - - Digital Terrestrial Receiver GB-19
General Viewing Function
Press PAUSE key on the RCU to pause the
screen. To bring it back to the normal mode,
press PAUSE key once again.
Pause the frame
Press PR key on the RCU to move
the previous channel you were watching.
Previous channel recall
DSR 4007_eng_6.26 6/27/02 4:29 PM Page 18
Channel manager consists of TV channel,
Radio channel. Press OK key placing the cursor
on the TV Channel.
N
N
o
o
t
t
e
e
:
:
Since the usage of Radio Channel is
same as that of TV channel, in this
manual only TV Channel manager is
explained.
In the left side of TV channel menu, you can see
the channel list which were already searched and
in the right side, you can watch the current
channel in small Picture in Graphic(PIG) mode
(1/9 size of the normal) and you can see channel
information under the PIG screen.
When you move cursor from one channel to
another, PIG will change accordingly.
Press MENU key on the RCU, then command
menu will be displayed
TV Channel manager has 9 commands as
follows;
1. Favorite
2. Move
3. Lock
4. Rename
5. Delete
6. Sort
7. Fast edit mode
8. Go To
9. Exit
Receiver provides most powerful channel managing function in the world and this function
allows you to have a more interesting and useful operation as well as watching channels simply.
Channel Manager
Channel Manager
Every time you change channels, you will receive
program information for a few second.
While watching channel, you can see the current
channel information anytime, pressing INFO key
on the RCU.
N
N
o
o
t
t
e
e
:
:
Channel information will be displaying
for 6 seconds and disappeared. You
can adjust the display time interval
from 2 to 12 seconds.
Channel Information
GB-20 Digital Terrestrial Receiver - - Digital Terrestrial Receiver GB-21
General Viewing Function
1) Volume Control
To increase or decrease volume, use key
on the RCU or VOL( ) on the front panel.
N
N
o
o
t
t
e
e
:
:
Receiver has 18 volume levels and
this shall be controlled from the
adjusted volume level of your TV.
2) Mute
To mute the sound, press button on the RCU.
To bring back the normal sound, press this key
once again.
3) Audio Control
Press the key repeatedly to select one of
three possible Audio settings (Left, Right and
Stereo) The current audio condition will be
displayed in the channel information
4) Language Selection
Press the AUDIO key on the RCU repeatedly to
select audio-language. This is dependent on the
transmission of audio signal from the air which
supports Multi-language.
L
R
+
Volume & Audio Control
DSR 4007_eng_6.26 6/27/02 4:29 PM Page 20
In the TV Channel Manager Page, press MENU
key on the RCU, and select Lock on the
command menu.
This Lock command allows you to lock the
channel. First, select the channel, which you
want to lock and press OK key and then,
will be marked at rear of the selected channel
name.
N
N
o
o
t
t
e
e
:
:
To perform this function, you should
set up the Parental Lock in advance.
Lock
Channel Manager
In the TV channel Manager Page, press MENU
key on the RCU, and select Rename on the
command menu.
The Rename function allows you to rename the
channel. First, select channel to be renamed and
press OK key, then, the keypad dialog will be
displayed. Edit new name by selecting characters
or numbers. To delete characters or numbers,
select
in the keypad dialog.
And check whether the channel name is
changed on channel list properly or not.
Rename
When you select Favorite, you find 3 Favorite
groups. Move cursor to one of favorite group out
of three and press OK key. Select any one
channel and press OK key. Then, will be
marked at the rear of selected channel name.
And if you want to delete the channel name in
the favorite channel list, press OK key once again,
then the mark will be disappeared.
After the selection of favorite channels, press
EXIT key twice to save data and press FAV key
repeatedly to see if each of the favorite groups
are properly selected.
Favorite
GB-22 Digital Terrestrial Receiver - - Digital Terrestrial Receiver GB-23
Channel Manager
In the TV channel Manager Page, press MENU
key on the RCU and select MOVE in the
command box.
Select a channel by pressing OK key and move
the cursor to the location in which you want to
move the selected channel and press OK key.
Then, you will find the selected channel has
moved to the desired location and channel no.
also changed in order accordingly.
And check whether the channel number is
changed on the channel list or not.
Move
DSR 4007_eng_6.26 6/27/02 4:29 PM Page 22
Fast Edit mode allows you to edit channels faster
than normal without showing channels selected.
If you turn off the Fast Edit mode, receiver will
show each of channels selected in the small PIG
screen and it takes a few seconds more to edit
channels.
Fast edit mode
Channel Manager
Go To function enables you to go to any page of
the menu tree by adopting Open Architecture
Concept for the implementation of software. This
powerful function makes the menu system be
user-friendly and easy-to-use.
How to use GO TO function.
1. Press MENU key on the RCU in the menu.
2. Select a TV Channel in the Channel Manager.
3. After your working in the TV Channel,
press MENU key on the RCU.
4. Then menu box will be displayed.
5. Select Go To menu and press OK key.
6. Sub-menu list will be displayed.
7. Select Timer and press OK key.
8. You can go to the Timer Page directly .
9. If you go back to TV Channel, repeat the
Go To procedures.
Go To
In the TV Channel Manager Page, press MENU
key on the RCU, and then select Delete on the
command menu. Then, sub-menu like Delete CH
and all will be displayed.
This Delete command allows you to delete the
channel permanently.
First select the channels, which you want to
delete, then selected channel number will be
changed to yellow X mark.
If you cancel the selection, press OK key again,
then the number will be back.
If you decided to delete, press EXIT key and then
Message box will be displayed. Press OK to
delete. And check whether the selected channels
are deleted on the channel list or not.
W
W
a
a
r
r
n
n
i
i
n
n
g
g
:
:
To perform this function, you should
set up the Parental Lock in advance.
Delete
GB-24 Digital Terrestrial Receiver - - Digital Terrestrial Receiver GB-25
Channel Manager
In the TV Channel Manager Page, press MENU
key on the RCU, and select Sort on the command
menu.
This Sort menu has its sub command and it
allows you to sort the channels as you like.
You can sort the channels by Favorite, Lock,
Scramble and CH Name.
Place the cursor on your desired line, and then
press OK key. And check whether the channels
are sorted properly on the channel list or not.
W
W
a
a
r
r
n
n
i
i
n
n
g
g
:
:
Radio Channel Manager has the same
operation as TV channel Manager.
Sort
DSR 4007_eng_6.26 6/27/02 4:29 PM Page 24
The TIMER function allows you to program the
timer with various ways. This function is one of
the strong point of Receiver.
Timer
You usually get the information about real time
from the satellite automatically.
But sometimes they emit wrong information.
In that case, you can adjust the real time at this
function.
You can also select Summer Time On or OFF.
Time Adjust
You can activate the “Turn on time” or
“Turn Off the time” by channel.
It enables to select timer maximum 10.
Timer allows you to program the various timer
functions.
You can set the timer daily, weekly, monthly and
one time.
Time Reservation
Receiver provides EPG function for you to get
access to the TV Guide(or Radio Guide if you are
listening to radio channels) which will show the
titles and other informations of the current and
next programs on different channels. The
information is only available from the network of
the channel you are watching.
To see the EPG data, press EPG key on the RCU
when watching a channel or select Program
Guide in the Main Page.
Then, EPG box will be displayed.
You can see the channel in the PIG screen,
channel list in the left side and Program schedule
for selected channel will be displayed in the right
side. The time will be displayed in relation with the
program schedule.
Select one channel and place the “
” mark on
the time of Program name. And press Info key,
then detail information box will be displayed.
N
N
o
o
t
t
e
e
:
:
A “No information yet” message will
be shown if the selected channel does
not provide EPG data.
GB-26 Digital Terrestrial Receiver - - Digital Terrestrial Receiver GB-27
EPG(Electronic Program Guide)
DSR 4007_eng_6.26 6/27/02 4:29 PM Page 26
TroubleShooting
You can see the version number of the product.
If you have a problem or any question on this
product, please feel free to contact the supplier
whose contact window is mentioned
in this Receiver Information.
Something wrong with STB
GB-28 Digital Terrestrial Receiver - - Digital Terrestrial Receiver GB-29
Receiver Information
Front Panel Display
: UP LOAD PROCEDURE
: DOWN LOAD PROCEDURE
: ERROR IN DATA TRANSMITTING
: TV MODE
: VCR MODE
: SYSTEM WAITING
: FLASH ROM ERROR
: SYSTEM BOOTING
PROBLEM
SOLUTION
Does not display any
message on the front panel
or receiver has no power.
No Picture
Poor picture quality
No Sound
Remote Control does not
operate
STB is locked and doesn’t
operate
Check the main power cord and check that it is
plugged into a suitable power outlet.
Check whether receiver is in Standby mode.
Ensure that the receiver is switched on (see above).
Check the video output port is firmly connected to
the TV or VCR.
Check that you have selected the correct channel or
Video Input on your TV.
Check the brightness level of the TV.
See “No Picture” above.
Check the signal level, if this is low then try to
adjust the alignment of your antenna.
See “No Picture” above.
Check the volume level of the TV and STB.
Check the Mute status of the TV and STB.
Point Remote Control Unit directly towards the STB.
Check and replace batteries.
Disconnect STB from power point for 30 seconds and
re-connect.
About On-Screen Error Message
No or Bad Signal Adjust the direction of your antenna
Check the “Signal Strength” and the “Signal Quality”
signal level of channel search menu.
PROBLEM
SOLUTION
DSR 4007_eng_6.26 6/27/02 4:29 PM Page 28
MEMO
- Digital Terrestrial Receiver GB-31GB-30 Digital Terrestrial Receiver -
System Specification
1) TV System : PAL B/G, I, D/K
2) Input Data Rate : 4.98 ~ 31.67 Mbps
3) Demodulation : In accordance with DVB-T EN 300 744
4) Inner FEC : Viterbi Convolutional Coding Rate
1/2, 2/3, 3/4, 5/6. 7/8(DVB)
5) Outer FEC : Reed Solomon Coding(204, 188)
T=8(DVB)
6) System Decoding : ISO/IEC 13818-1(MPEG2) TS
Specification TS Descrambling
7) Video Decoder : 13818-2(MPEG2) MP@ML
11172-2(MPEG1) Compatible
Wide Screen TV(16:9) / Normal TV(4:3)
8) Picture Resolution : 720(H) X 576(V) X 50 Field/Sec.
560(H) X 576(V) X 50 Field/Sec.
576(H) X 576(V) X 50 Field/Sec.
360(H) X 576(V) X 50 Field/Sec.
9) Audio Decoder : ISO/IEC 11172-3(MPEG1) Layer 1,2
Multi-lingual
Sampling Frequency : 33, 44.1, 48 Khz
Operation Mode : Stereo, Dual Mono,
Joint Stereo
DSR 4007_eng_6.26 6/27/02 4:29 PM Page 30
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
Schwaiger DSR 4007 User manual
- Category
- TV set-top boxes
- Type
- User manual
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
in other languages
- Deutsch: Schwaiger DSR 4007 Benutzerhandbuch
