HunterDouglas Applause Installation and Care

Type
Installation and Care

This manual is also suitable for

HunterDouglas Applause shades offer a unique combination of style and functionality, providing versatile light control and energy efficiency for your home. With their innovative design, these shades can be customized to fit various window shapes and sizes, including angles and specialty shapes. The included specialty brackets enable easy installation, allowing you to mount the shades securely and precisely. Applause shades feature a cordless operation, enhancing child safety and providing convenience with a simple lift or pull.

HunterDouglas Applause shades offer a unique combination of style and functionality, providing versatile light control and energy efficiency for your home. With their innovative design, these shades can be customized to fit various window shapes and sizes, including angles and specialty shapes. The included specialty brackets enable easy installation, allowing you to mount the shades securely and precisely. Applause shades feature a cordless operation, enhancing child safety and providing convenience with a simple lift or pull.

Duette
®
and Applause
®
Honeycomb Shades
Angles and Specialty Shapes
Installation and Care
CONTENTS
Questions?
Call Hunter Douglas Consumer Support at 1-888-501-8364.
GETTING STARTED
Product View — Angle ..........................................................1
Product View — Specialty Shape ......................................... 2
Tools and Fasteners Needed .................................................3
Installation Overview .............................................................3
STAND-ALONE ANGLE INSTALLATION
Mount the Specialty Brackets ...............................................4
Install the Stand-Alone Angle ...............................................5
ANGLE SHARING A RECTANGULAR SHADE
HEADRAIL INSTALLATION
Mount the Specialty Brackets for the Angle ......................... 6
Mount the Rectangular Shade...............................................6
Mount the Top Rail of the Angle ...........................................6
Attach the Angle to the Rectangular Shade .........................6
SPECIALTY SHAPE INSTALLATION
Mount the Specialty Brackets ...............................................7
Install the Specialty Shape ....................................................8
CARE
Removing the Shade, If Necessary .......................................9
Cleaning Procedures ............................................................ 10
WARRANTY ...........................................................Back Cover
© 2019 Hunter Douglas. All rights reserved. All trademarks used herein are the property of Hunter Douglas or
their respective owners.
GETTING STARTED
1
Product View — Angle (non-operable)
Top Rail
Bottom Rail
Specialty Brackets
Specialty
Brackets
Specialty
Brackets
Magnet
Filler
Strip
Rectangular Shade
Headrail
Stand-Alone Angle
Angle Sharing a
Rectangular Shade Headrail
2
GETTING STARTED
Product View — Specialty Shape (non-operable)
Octagon
Not Shown: Hexagon and Trapezoid
Specialty Brackets
Top Rail
Bottom Rail
GETTING STARTED
3
Thank you for purchasing Hunter Douglas Duette
®
and Applause
®
Honeycomb Shades. With
proper installation and care, your new shades will provide years of beauty and performance.
Please thoroughly review this instruction booklet and the enclosed packing list before
beginning the installation.
Tools and Fasteners Needed
Flat blade and Phillips screwdrivers
Pencil
Power drill,
3
32
" drill bit, and
1
4
" hex driver
In addition, you will need fasteners designed to work with your specific mounting surface(s).
#6 Hex Head Screws (Provided). Two 1
1
2
" screws are provided per installation bracket.
#6 Flat Head Screws (Provided). If end mounting a rectangular shade, use two 1
1
2
"
screws per installation bracket.
Drywall Anchors (Not Provided). Use drywall anchors when mounting into drywall.
Installation Overview
IMPORTANT: Angle and Specialty Shape shades can only be mounted on the inside of the
window casement.
Refer to the appropriate page below based on your order:
Stand-Alone Angle Installation Page 4
Angle Sharing a Rectangular Shade Headrail Installation Page 6
Specialty Shape Installation Page 7
#6 x 1
1
2
"
Hex Head Screw
(Provided)
#6 Flat Head Screw
for Use with Rectangular
Shade Headrail End Mounts
(Provided)
STAND-ALONE ANGLE INSTALLATION
4
Mount the Specialty Brackets
Your order will include specialty brackets
specific to your pleat size.
The number of specialty brackets required
varies with the bottom rail width, as shown
in the table.
NOTE: The specialty bracket for
3
4
" pleat size is shown; the installation procedures
for other pleat sizes are the same.
Bend the two tabs of the bracket templates downward and insert the tabs into the holes
in the top and bottom rails as shown below. Use the holes near each end, whenever
possible. If three or more brackets are required, use the center hole(s) for the additional
bracket(s).
NOTE: There are extra holes in the rail in case the holes nearest each end do not work
for your specific application.
IMPORTANT: Make sure the double-sided tape on the bracket templates is facing away
from the rail.
Remove the backing from the double-sided tape on the bracket templates.
Place each rail inside the window opening at the desired mounting location.
Width of
Bottom Rail
Brackets Required
for Each Rail
12" – 36" 2
36
1
8
" – 54" 3
54
1
8
" – 72" 5
Specialty Bracket
Double-sided Tape
Bracket Template
Tabs
Double-sided Tape
STAND-ALONE ANGLE INSTALLATION
5
Press each rail against the mounting surface until the templates stick to the mounting
surface.
Carefully remove the shade from the window opening.
IMPORTANT: Make sure the templates stay on the mounting surfaces.
Mark the screw holes.
Carefully remove the templates from the mounting surfaces.
Drill the screw holes using a
3
32
" drill bit.
Attach the specialty brackets using the screws provided.
IMPORTANT: The specialty brackets should be aligned and level with each other.
Install the Stand-Alone Angle
Install the shade into the specialty brackets.
Push the rail into the brackets and rotate
toward the window frame until it latches.
IMPORTANT: Make sure the fabric is not
caught between the bracket tabs and the rail
and that the spring tabs are on the back of
the rail.
Rail
Bracket
Spring Tab
Latch
Front
ANGLE SHARING A RECTANGULAR SHADE HEADRAIL INSTALLATION
6
Mount the Specialty Brackets for the Angle
Mount the specialty brackets for the top rail of the angle. Refer to the procedures on pages
4 and 5.
Mount the Rectangular Shade
IMPORTANT: Angles can only be attached to a rectangular shade that is end mount.
For end mount bracket location and headrail installation, refer to the “End Mount” section in
the Installation, Operation, and Care instructions that came with your rectangular shade.
Mount the Top Rail of the Angle
Install the top rail of the angle into the specialty brackets. Refer to the install procedure
on page 5.
Attach the Angle to the Rectangular Shade
Fan out the angle fabric toward the rectangular shade headrail.
The rectangular shade headrail has a magnetic strip attached to the top of the rail, and
the angle has a corresponding magnetic strip in the bottom cell of the fabric stack.
Position the bottom cell of the angle fabric onto the top of the rectangular shade headrail
so that the magnets connect and hold firmly. Adjust the placement of the fabric as
necessary.
Magnet
SPECIALTY SHAPE INSTALLATION
7
Mount the Specialty Brackets
Your order will include specialty brackets specific to your
pleat size.
The number of specialty brackets required varies with
rail width, as shown in the table.
NOTE: The specialty bracket for
3
4
" pleat size is shown; the installation procedures
for other pleat sizes are the same.
Bend the two tabs of the bracket templates downward and insert the tabs into the holes
in the top rail as shown below. Use the holes near each end, whenever possible.
NOTE: There are extra holes in the rail in case the holes nearest each end do not work
for your specific application.
IMPORTANT: Make sure the double-sided tape on the bracket templates is facing away
from the rail.
Remove the backing from the double-sided tape on the bracket templates.
Place the top rail inside the window opening, centered, at the depth desired.
Press the top rail against the mounting surface until the templates stick to the mounting
surface.
Width of Rail
Brackets
Required
8" – 60" 2
60
1
8
" – 72" 3
Specialty Bracket
Double-sided Tape
Bracket Template
Tabs
Double-sided Tape
SPECIALTY SHAPE INSTALLATION
8
Carefully remove the shade from the window opening.
IMPORTANT: Make sure the templates stay on the mounting surface.
Mark the screw holes.
Carefully remove the templates from the mounting surface.
Drill the screw holes using a
3
32
" drill bit.
Attach the specialty brackets using the screws provided.
IMPORTANT: The specialty brackets should be level and aligned.
Install the Specialty Shape
Install the shade into the specialty brackets.
Push the rail into the brackets and rotate
toward the window frame until it latches.
IMPORTANT: Make sure the fabric is not
caught between the bracket tabs and the rail
and that the spring tabs are on the back of
the rail.
Rail
Bracket
Spring Tab
Latch
Front
CARE
9
Removing the Shade, If Necessary
Specialty Brackets
Push the rail against the brackets to release
the latch and lift it out of the brackets.
Removing the Angle and Rectangular Shade
Angle
Grasp the bottom cell and magnet of the angle and lift up to detach from the magnet on
top of the rectangular shade headrail.
Rectangular Shade
Lower the rectangular shade approximately 4".
While holding the headrail, push back on the
bottom tab of the installation bracket to release
the bottom edge of the headrail.
After releasing the bottom edge, roll the back of
the headrail down and out from the bracket.
Rail
Bracket
Front
Headrail
Bracket
Back of
Shade
Remove
Bottom
Tab
CARE
10
Cleaning Procedures
Hunter Douglas Duette
®
and Applause
®
Honeycomb Shades are made of anti-static,
dust-resistant fabric which repels dirt and dust. For most honeycomb fabrics, the following
cleaning options are available.
Dusting
Regular light dusting with a feather duster is all the cleaning that is needed in most
circumstances.
Vacuuming
CAUTION: Do not vacuum Elan
®
fabrics.
For deeper cleaning, vacuum gently with a brush attachment.
Compressed Air/Hair Dryer (Cool Setting)
Use compressed air or a hair-dryer on a cool setting to blow dust and dirt off shades.
Spot-Cleaning
CAUTION: Do not spot-clean Alexa, Alexa Metallic
, Apollo
, Calypso
, Commercial, Elan,
Applause Esprit
, India Silk, Jardin, Leela, Macon
, and all Batiste fabrics.
Prepare a solution of warm water and a mild detergent.
Dampen a clean cloth in the solution and wring it out.
Dab the spot with the dampened cloth until it is removed. Do not rub the fabric.
Allow the shade to dry in the completely lowered (or fanned out) position.
Bathtub Cleaning/Water Immersion
CAUTION: Do not immerse Alexa, Alexa Metallic, Calypso, Commercial, Elan, India Silk, all
Batiste fabrics, all Alustra
®
Duette fabrics, and all room-darkening fabrics. Do not immerse
Applause Esprit fabrics.
Immerse the shade in a basin or bathtub filled with warm water and a mild detergent.
Rinse with clean water.
Before removing from the rinse water, fully raise the shade and tilt it to allow excess
water to drain off.
Dry the shade completely in the lowered (or fanned out) position.
CARE
11
Ultrasonic Cleaning
CAUTION: Do not ultrasonically clean Commercial, Batiste 1
1
4
" Semi-Sheer, and all
room-darkening fabrics.
Specify that a mild detergent solution be used.
Dry the shade completely in the lowered (or fanned out) position.
Injection/Extraction Cleaning
This type of professional cleaning injects a cleaning solution into the fabric and extracts the
dirty solution in the same motion.
Use only the dry method of injection/extraction for
Elan
®
fabrics.
If using injection/extraction for Alexa and Batiste Bamboo fabrics, specify that no
chemicals are used (water only).
Notes
5/191005293
QTY:
The Hunter Douglas
®
Lifetime Guarantee is an expression of our desire to provide a thoroughly satisfying
experience when selecting, purchasing and living with your window fashion products. If you are not
thoroughly satisfied, simply contact Hunter Douglas at (888) 501-8364 or visit hunterdouglas.com. In support
of this policy of consumer satisfaction, we offer our Lifetime Limited Warranty as described below.
Hunter Douglas (or its licensed fabricator/distributor) will repair or replace the
window fashion product or components found to be defective.
COVERED
BY A LIFETIME LIMITED WARRANTY
TO OBTAIN WARRANTY SERVICE
NOT COVERED
BY A LIFETIME LIMITED WARRANTY
Hunter Douglas window fashion products are
covered for defects in materials, workmanship or
failure to operate for as long as the original retail
purchaser owns the product (unless shorter
periods are provided below).
All internal mechanisms.
Components and brackets.
Fabric delamination.
Operational cords for a full 7 years from the date
of purchase.
Repairs and/or replacements will be made with
like or similar parts or products.
Hunter Douglas motorization components are
covered for 5 years from the date of purchase.
1. Contact your original dealer (place of purchase) for warranty assistance.
2. Visit hunterdouglas.com for additional warranty information, frequently asked questions and access to
service locations.
3. Contact Hunter Douglas at (888) 501-8364 for technical support, certain parts free of charge, for
assistance in obtaining warranty service or for further explanation of our warranty.
NOTE: In no event shall Hunter Douglas or its licensed fabricators/distributors be liable or responsible for
incidental or consequential damages or for any other indirect damage, loss, cost or expense. Some states
do not allow the exclusion or limitation of incidental or consequential damages, so the above exclusion or
limitation may not apply to you. This warranty gives you specific legal rights, and you may also have other
rights which vary from state to state.
Different warranty periods and terms apply for commercial products and applications.
Any conditions caused by normal wear and tear.
Abuse, accidents, misuse or alterations to the
product.
Exposure to the elements (sun damage, wind,
water/moisture) and discoloration or fading over
time.
Failure to follow our instructions with respect to
measurement, proper installation, cleaning or
maintenance.
Shipping charges, cost of removal and
reinstallation.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16

HunterDouglas Applause Installation and Care

Type
Installation and Care
This manual is also suitable for

HunterDouglas Applause shades offer a unique combination of style and functionality, providing versatile light control and energy efficiency for your home. With their innovative design, these shades can be customized to fit various window shapes and sizes, including angles and specialty shapes. The included specialty brackets enable easy installation, allowing you to mount the shades securely and precisely. Applause shades feature a cordless operation, enhancing child safety and providing convenience with a simple lift or pull.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI