AQUALUX Aqua 4 User manual

Brand
AQUALUX
Model
Aqua 4
Type
User manual

AQUALUX Aqua 4 is a versatile shower screen with a towel rail, suitable for both right and left-hand fixing. It's designed for use with tiled surfaces and requires two people to install. The screen is made of toughened glass for safety and features a horizontal seal for watertightness. Installation involves drilling holes, inserting wall plugs, and securing the screen with screws. A silicone sealant (not included) is applied for added protection. The product comes with all necessary screws and fittings.

AQUALUX Aqua 4 is a versatile shower screen with a towel rail, suitable for both right and left-hand fixing. It's designed for use with tiled surfaces and requires two people to install. The screen is made of toughened glass for safety and features a horizontal seal for watertightness. Installation involves drilling holes, inserting wall plugs, and securing the screen with screws. A silicone sealant (not included) is applied for added protection. The product comes with all necessary screws and fittings.

IN00297 (rev A)
Half Framed Sail Bath Screen
with Towel Rail
Suitable for both Right and Left Hand Fixing•
Check that the bath has been installed •
correctly and that it is level (Fig. A), tiled
down onto and sealed to the manufacturerʼs
guidelines. Please Note: All product supplied
without bath.
Check that there is suffi cient space on the •
bath for the product and that the screen
movement does not foul other items such as
sinks and taps.
Ensure the product is fi tted to a non-porous •
surface ie. tiled. Check that the wall surface
is fl at.
Unpack and check the product is complete •
and undamaged.
Fixings are supplied for solid walls only. •
Ensure that the correct fi xings are used for the
wall type – if in doubt seek professional advice
Ensure the area is clean, dry and dust free.•
Read the instructions in full.•
Have the correct tools available, (as shown •
below, see ʻTools Requiredʼ).
Handle all glass with care - support on cardboard to avoid risk of breakage.•
This product is heavy and requires 2 people to carry and install it.•
When drilling walls check fi rst for hidden pipes and cables.•
All glass is toughened – it cannot be reworked or replaced by ordinary glass.•
Use safety eyewear when drilling.•
Use safety eyewear when handling glass.•
Keep all small parts away from children.•
Safety
Please notify the retailer immediately of any damage or faults. The manufacturer cannot be •
held responsible for any installation costs that may arise from damaged or faulty product being
installed.
Please dispose of all packaging with due regard to the environment.•
Disclaimer
Before You Start
Tools Required (not supplied)
Fig.A.
Spirit Level Screwdriver Tape Measure Pencil Silicone Gun & Sealant Power Drill
Suitable Drill Bits
6mm dia. *
3mm dia. HSS
* Ensure drill bit used is suitable for wall surface
Parts & Fittings Supplied
Please notify the retailer immediately of any
damage or faults. The manufacturer cannot
be held responsible for any installation costs
that may arise from a damaged or faulty
product being installed.
!
Keep small parts away from children
!
D1
D2
Assembled
Glass Screen
X1
Horizontal Seal
X1
Loose Screws & Fittings Supplied
No.8 x 1¾” Pan Head Pozi Screws
x3
(actual size)
Qty
x3
Qty
Wall Plugs
(actual size)
Screw Snap Caps
(actual size)
A
B E
No.8 x ⅜” Pan Head Pozi Screws
(actual size)
D
Screw Snap Cap Base
(actual size)
C
x3
Qty
x3
Qty
x3
Qty
D1 D2
B
D
Wall Channel
X1
C
A
E
Wall Channel
Cap
X1
Stile Cap
X1
Towel Rail
Assembly
X1
Important Note: Ensure that Drain holes are always facing inwards.
If Glass Screen is positioned with the drain holes not facing inwards, please adjust glass screen as detailed.
Remove Top Drain
as shown.
i)
ii)
Rotate Wall Stile
Ensure Drain now at
top is facing INWARDS
!
Ensure Drain is repositioned
facing INWARDS
!
iii)
Remove Glass Screen
from Wall Stile
Reposition Drain
as shown.
iv)
BATH
SIDE
OUTSIDE
FACE
1.1
1.2
1.3
1
Tip:
When drilling tiles apply masking tape to
surface to stop drill bit slipping.
*
Wall plugs supplied are for solid walls only.
Ensure correct wall plug for wall type is used.
If in doubt seek professional advice.
!
Position wall channel on wall. Ensure
channel is vertically level and does not
overhang the bath.
!
B
A
Mark position of pre-drilled
channel holes
6mm dia. holes with
drill bit suitable for
wall surface
Position Wall
Channel with
curved side facing
away from bath.
!
2
Handle unframed glass with care - support
on cardboard to avoid risk of breakage.
!
Ensure Glass
Screen is level
!
3
3.1*
3.2
Inside View
Inside View
E
D
*3mm dia. holes through
pre-drilled holes using HSS
drill bit.
Ensure Bath Screen is level
prior to fi xing, adjust to suit.
!
C
Ensure drain holes are facing INWARDS. If
not please refer back to page 4 to change
bath screen handing. Drain holes must be
facing inwards as shown.
!
Ensure Drain is
facing INWARDS
Ensure Drain is
facing INWARDS
5
4
Inside View
Cut Horizontal
Seal to suit
Inside View
4.1
TIP:
To push fi t Frame Seal, start at the
corner and work across.
*
150mm
7
Apply Silicone Sealant,
(not supplied).
!
Product Care:
Use a non abrasive cleaner.
Water marks may be removed
with a proprietary limescale
remover or household vinegar.
*
Only apply sealant to the outside
of the Bath Screen.
DO NOT use silicone sealant on
inside of the Bath Screen.
!
6
Towel Rail is supplied assembled. Use allen
key supplied, disassemble part and then
reassemble as shown. Ensure all screw
heads are on the door interior.
!
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

AQUALUX Aqua 4 User manual

Brand
AQUALUX
Model
Aqua 4
Type
User manual

AQUALUX Aqua 4 is a versatile shower screen with a towel rail, suitable for both right and left-hand fixing. It's designed for use with tiled surfaces and requires two people to install. The screen is made of toughened glass for safety and features a horizontal seal for watertightness. Installation involves drilling holes, inserting wall plugs, and securing the screen with screws. A silicone sealant (not included) is applied for added protection. The product comes with all necessary screws and fittings.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents