Page is loading ...
43.3” x 22” Sit-Stand Desktop Workstation
Scan the QR code with your mobile device or follow the link
for helpful videos and specications related to this product.
Instruction Manual
https://vivo-us.com/products/desk-v000vce
SKU: DESK-V000VCE
2 3
If you do not understand these directions, or if you have any doubts about the safety of the
installation, please call a qualied technician. Check carefully to make sure there are no missing or
defective parts. Improper installation may cause damage or serious injury. Do not use this product
for any purpose that is not explicitly specied in this manual and do not exceed weight capacity.
We cannot be liable for damage or injury caused by improper mounting, incorrect assembly, or
inappropriate use.
PACKAGE CONTENTS
TOOLS NEEDED
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
ASSEMBLY STEPS
STEP 1
Carefully remove desktop (A) from packaging and set on table.
WARNING!
Phillips
Screwdriver
A (x1)
Adjustable
Desktop
B (x2)
Extended
Feet
C (x10)
M5x10
E (x1)
Cable Clip
F (x2)
Cable Tie
I (x1)
Power Cord
D (x6)
M5x12
STEP 2
Flip the desktop (A) over and attach extended feet (B) to the frame using
M5x10 screws (C) with a Phillips screwdriver.
Install power cord (I). Plug the cord into the wall and press the switch on the right side to
raise the desktop.
STEP 3
33 lbs
(14.97kg)
G (x1)
Keyboard
Tray
H (x2)
Keyboard
Bracket
A
C
B
B
I
Turn on the power
Wall
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
4 5
STEP 7
Attach cable clip (E) where desired to underside of desk.
STEP 5
STEP 6
Place monitor, laptop, and other items on desktop.
Mount assembled keyboard tray to desk using M5x12 screws (D) with a Phillips
screwdriver.
STEP 4
Mount the keyboard brackets (H) to the keyboard tray (G) using M5x10 screws (C) with a
Phillips screwdriver.
C
G
H
D
E
6 7
Manage cables using the cable ties
STEP 8
F
Last Updated: 1/9/2019
If any parts are received damaged or defective, please contact us. We are happy to
replace parts to ensure you have a fully functioning product.
For more VIVO products, check out our website at:
www.vivo-us.com.
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
/