Hitachi L46VF04ULD Owner's manual

Brand: Hitachi

Model: L46VF04ULD

Category: LCD TVs

Type: Owner's manual

INSTRUCTION MANUAL

46’’ Colour LED TV

L46VF04ULD

Important - Please read these instructions fully before installing or operating and keep for future

reference.

These instructions contain important information which will help you get the best from your

television and ensure safe and correct installation and operation.

For any help concerning set up and use of your TV please call the

Customer Helpline: 0845 604 0105

Lines open: 9am - 8pm Monday to Saturday and 10am - 4pm Sunday

For any help concerning set up and use of your TV please call the Customer Helpline: 0845 604 0105

Contents

Contents 1

Contents 2

Preparation 3

Intended Use 3

Power source 4

Positioning the TV 4

Power cord and plug 4

Moisture and Water 5

Ventilation 5

Heat sources and Flames 5

Headphone Volume 5

Wall Mounting (optional) 5

LCD Screen 5

Cleaning 5

Batteries 5

Replacement Parts 6

Servicing 6

Taking out of service and storing 6

Connection to a Television Distribution System

(Cable TV etc.) from Tuner 6

Symbols in this Instruction Book 6

Getting Started 7

Support 7

Getting Started 8

TV - Features 8

Accessories included 8

Viewing remote control 9

Getting Started 10

TV - Control buttons (left side) 10

Aerial connection 11

Power connection 11

Remote control -

Inserting batteries 11

Wall Mounting 11

Switching the TV On and Off 11

Switching the TV On 11

Switching the TV Off 11

Operation using TV control buttons 12

Operation using Remote control buttons 12

Initial set up 13

Initial set up 14

General operation 14

Information Banner 14

Connections 15

Back connections explained 15

Left side connections explained 16

HDMI Connections 17

SCART Connections 17

VGA Connections 17

Side AV Connections 18

Using a Conditional Access Module 18

USB Connections 19

Basic Features 20

How to navigate menus - Selecting source 20

Electronic programme guide (EPG) 20

General Operation 21

Displaying Subtitles 21

Zoom Modes 21

Using Main Menu Screen 21

Conﬁ guring Date/Time Settings 21

Source Settings 21

Audio Language 21

Basic Features 22

Navigating Channel List 22

Moving a Channel 22

Deleting a Channel 22

Renaming a Channel 22

Locking a Channel 22

Sorting Channel List 22

Language Settings 23

Parental Control 24

Parental Settings Menu Operation

(*) 24

Environmental Information 25

Other Functions and Features 26

Favourite Mode 26

Conditional Access 26

Setting Sleep Timer 26

Setting Programme Timers 26

Editing a Timer 26

Deleting a Timer 26

Picture Controls 27

Conﬁ guring Picture Settings 27

Operating Picture Settings Menu Items 27

Picture Settings Menu Items 27

PC Picture Settings Operation 27

Sound and Source Settings 28

Conﬁ guring Sound Settings 28

Sound Settings Menu Items 28

Conﬁ guring Source Settings 28

Other Controls 29

Operation 29

Other Settings Menu Items 29

01_MB65_[GB]_IDTV (ARGOS)_BRONZE18_3902UK_46940LED_10079642_50221131.indd 1 01.06.2012 16:50:36

For any help concerning set up and use of your TV please call the Customer Helpline: 0845 604 0105

Model number

HITACHI L46VF04ULD

Contents

Advanced Features 30

Media Browser 30

Starting Media Browser 30

Media Browser Conﬁ guration 30

Operation 30

View Style 30

Slide Show Interval 30

Show Subtitle 30

Subtitle Language 30

Subtitle Position 30

Subtitle Font Size 30

Loop / Shufﬂ e during Playback 30

Media Browser - continued 31

Viewing Videos via USB 31

Video Playback Screen 31

Subtitle Time Correction 31

Viewing Photos via USB 31

Displaying Photos in Slideshow Mode 31

Playing Music via USB 31

Setting the channels 32

Accessing Installation Menu 32

Automatic Channel Scan (Retune) 32

Manual Channel Scan 32

Analogue Fine Tune 32

First Time Installation 32

Clear Service List 32

Other Information 33

Teletext 33

Analogue Teletext 33

Digital Teletext (for the UK only) 33

Speciﬁ cations 34

Product Support 35

Trouble shooting 35

Disposal information 36

Supported DVI Resolutions 37

PC Input Typical Display Modes 38

Supported File Formats for USB Mode 39

AV and HDMI Signal Compatibility (Input Signal

Types) 39

Deﬁ nition of important terms 40

Software Upgrade 41

DVB-T functionality information 42

Guarantee 43

01_MB65_[GB]_IDTV (ARGOS)_BRONZE18_3902UK_46940LED_10079642_50221131.indd 2 01.06.2012 16:50:37

For any help concerning set up and use of your TV please call the Customer Helpline: 0845 604 0105

Safety Information

IMPORTANT - Please read these instructions fully before installing or operating

Preparation

Place the device on a solid even surface. For ventilation,

leave a free space of at least 10 cm all around the

set. To prevent any fault and unsafe situations, do not

place any objects on top of the set. Use this device in

moderate climates.

Operation temperature and operation humidity:

5ºC up to 45ºC, 85% rel. humidity max. (not blocking

ventilation openings).

Intended Use

This device is used to receive and display TV

programmmes. The different connection options make

an additional expansion of the reception and display

sources possible (various external devices). This device

is only suitable for dry interior use. This appliance is

intended solely for private domestic use and may not

be used for industrial and commercial purposes. We

exclude liability in principle, if the device is not used

as intended, or unauthorized modiﬁ cations have been

made. To operate your LCD TV in extreme ambient

conditions may cause the damage of the device.

WARNING: Never let people (including children)

with physical, sensory or mental abilities or lack of

experience and / or knowledge unsupervised use

electrical device!

Children may not recognize dangers. The swallowing

of batteries can be fatal. Keep batteries always out of

reach of small children. If a battery is swallowed, seek

immediate medical attention. Keep the packaging ﬁ lms

out of reach of children, there is a risk of suffocation.

**************

Please read the following recommended safety

precautions carefully for your safety.

SOME DOS AND DON’TS ON THE SAFE USE

OF EQUIPMENT

This equipment has been designed and manufactured

to meet international safety standards but, like any

electrical equipment, care must be taken if you are to

obtain the best results and safety is to be assured.

**************

The lightning ﬂ ash with arrowhead symbol, within

an equilateral triangle, is intended to alert the

user to the presence of uninsulated “dangerous

voltage” within the product’s enclosure that may

be of sufﬁ cient magnitude to constitute a risk of

electric shock of persons.

The exclamation point within an equilateral triangle

is intended to alert the user to the presence of

important operating and maintenance (servicing)

instructions in the literature accompanying the

appliance.

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION

CAUTION:

TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK).

NO USER-SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE

PERSONNEL.

DO read the operating instructions before you attempt

to use the equipment.

DO ensure that all electrical connections (including

the mains plug, extension leads and inter-connections

between the pieces of equipment) are properly made

and in accordance with the manufacturer’s instructions.

Switch off and withdraw the mains plug before making

or changing connections.

DO consult your dealer if you are ever in doubt about

the installation, operation or safety of your equipment.

DO be careful with glass panels or doors on

equipment.

DO route the mains lead so that it is not likely to be

walked on, crushed, chafed, or subjected to excessive

wear and tear or heat.

**************

DON’T remove any ﬁ xed cover as this may expose

dangerous voltages.

DON’T obstruct the ventilation openings of the

equipment with items such as newspapers, tablecloths,

curtains, etc. Overheating will cause damage and

shorten the life of the equipment.

DON’T allow electrical equipment to be exposed to

dripping or splashing, or objects ﬁ lled with liquids, such

as vases, to be placed on the equipment.

DON’T place hot objects or naked ﬂ ame sources

such as lighted candles or nightlights on, or close to

equipment. High temperatures can melt plastic and

lead to ﬁ res.

DON’T use makeshift stands and NEVER ﬁ x legs with

wood screws - to ensure complete safety always ﬁ t the

manufacturer’s approved stand or legs with the ﬁ xings

provided according to the instructions.

DON’T use equipment such as personal stereos or

radios so that you are distracted from the requirements

of trafﬁ c safety. It is illegal to watch television whilst

driving.

DON’T listen to headphones at high volume, as such

use can permanently damage your hearing.

01_MB65_[GB]_IDTV (ARGOS)_BRONZE18_3902UK_46940LED_10079642_50221131.indd 3 01.06.2012 16:50:37

For any help concerning set up and use of your TV please call the Customer Helpline: 0845 604 0105

DON’T leave equipment switched on when it is

unattended unless it is speciﬁ cally stated that it is

designed for unattended operation or has a stand-by

mode. Switch off using the switch on the equipment

and make sure that your family know how to do this.

Special arrangements may need to be made for inﬁ rm

or handicapped people.

DON’T continue to operate the equipment if you are in

any doubt about it working normally, or if it is damaged

in any way - switch off, withdraw the mains plug and

consult your dealer.

ABOVE ALL

--- NEVER let anyone especially children push anything

into holes, slots or any other opening in the case - this

could result in a fatal electrical shock;

--- NEVER guess or take chances with electrical equipment

of any kind

--- it is better to be safe than sorry!

Power source

The TV should be operated only from a 220-240V •

AC, 50 Hz outlet.

Warning: When the set is not in use for a long time,

disconnect from the power.

Positioning the TV

For ventilation, please leave a clear space of at •

least 10cm all around the TV.

Do not • block the ventilation openings.

Do not• place the TV on sloping or unstable

surfaces, the TV may tip over.

To prevent damage to the TV, • do not place any

objects on top of the TV.

Only use the TV in moderate climates.•

Power cord and plug

Do not place the set, a piece of furniture, etc. on •

the power cord (mains lead) or pinch the cord.

Handle the power cord by the plug. Do not unplug

the appliance by pulling from the power cord and

never touch the power cord with wet hands as

this could cause a short circuit or electric shock.

Never make a knot in the cord or tie it with other

cords. The power cords should be placed in such

a way that they are not likely to be stepped on. A

damaged power cord can cause ﬁ re or give you

an electric shock. When it is damaged and needs

to be replaced, it should be done by qualiﬁ ed

personnel.

This TV receiver is supplied with a moulded •

mains plug. The mains plug must not be cut off,

as it may contain a special radio interference

ﬁ lter, the removal of which could lead to impaired

performance. If you wish to extend the lead, obtain

an appropriate safety approved extension lead or

consult your dealer.

Observe the manufacturers instructions when •

connecting extension leads to the set. Check the

fuse rating on the new plug; this should be ﬁ tted

with a 5 Amp fuse which conforms to either ASTA

or BSI (BS1362) approvals, these are easily

identiﬁ able by either the

ASA

or symbols. If you

are in any doubt about the installation of an

extension lead, please consult a competent

electrician.

Safety Information

IMPORTANT - Please read these instructions fully before installing or operating

10 cm

01_MB65_[GB]_IDTV (ARGOS)_BRONZE18_3902UK_46940LED_10079642_50221131.indd 4 01.06.2012 16:50:38

For any help concerning set up and use of your TV please call the Customer Helpline: 0845 604 0105

Batteries

• Warning: Incorrect installation of

batteries may cause battery leakage

and corrosion, resulting in damage to

the remote control.

Do not • mix old and new batteries, or

batteries of different types.

Do not • dispose of batteries in a ﬁ re.

Do not • dispose of batteries with normal household

waste, take to a local recycling centre.

CAUTION: Insert the batteries / rechargeable

batteries in the correct polarity. Don´t try to recharge

non rechargeable batteries and under no circumstances

throw them into ﬁ re. Danger of explosion. Do not use

unequal batteries (old and new, Alkaline and carbon,

etc.) simultaneously. If you will not use the device for

a long time, remove the batteries and store the device

in a dry and dust free place. Improper use of batteries

may cause an explosion or leakage. If the batteries have

leaked, use gloves and clean the appliance thoroughly

with a dry cloth! Batteries should not be exposed to

heat, such as sunshine, ﬁ re or the like.

Warning: Do not leave your TV in standby or

operating mode when you leave your house.

Safety Information

IMPORTANT - Please read these instructions fully before installing or operating

Moisture and Water

Do not• use this TV in a humid or damp place (avoid

bathrooms, the sink in the kitchen, etc.

Do not• expose this TV to rain or water, as this may

be dangerous.

Do not• place objects ﬁ lled with liquids, such as

ﬂ ower vases, on top of the TV. Avoid from dripping

or splashing.

If any solid object or liquid falls into the cabinet, •

unplug the TV and have it checked by qualiﬁ ed

personnel before operating it any further.

Ventilation

The slots and openings on the TV set are intended •

for ventilation and to ensure reliable operation.

To prevent overheating, these openings must not •

be blocked or covered in anyway.

Heat sources and Flames

Do not• expose the TV to direct sunlight or other

heat sources.

The TV should not be placed near to •

open ﬂ ames and sources of intense

heat such as an electric heater.

Ensure that no open ﬂ ame sources, •

such as lighted candles, are placed on top of the

TV.

Headphone Volume

Excessive sound pressure from earphones •

and headphones can cause hearing loss,

please take care.

Wall Mounting (optional)

To prevent injury, this TV must be securely attached •

to the wall in accordance with the installation

instructions (if the option is available).

LCD Screen

Occasionally, a few non-active pixels may appear •

on the screen as a fixed blue, green or red

point. Please note that this does not affect the

performance of your product.

Take care not to scratch the screen with ﬁ ngernails •

or other hard objects.

Cleaning

Before cleaning, unplug the TV from the wall •

socket.

Do not • use liquid or aerosol cleaners. Only use a

soft, dry cloth.

01_MB65_[GB]_IDTV (ARGOS)_BRONZE18_3902UK_46940LED_10079642_50221131.indd 5 01.06.2012 16:50:39

For any help concerning set up and use of your TV please call the Customer Helpline: 0845 604 0105

Replacement Parts

When replacement parts are required, make sure that

the service technician has used replacement parts,

which are speciﬁ ed by the manufacturer or have the

same speciﬁ cations as the original one. Unauthorised

substitutions may result in ﬁ re, electrical shock or other

hazards.

Servicing

• Warning: Risk of electric shock, do not attempt

to repair, service or modify this TV yourself. Contact

the manufacturer, their approved service agent or

the Customer Helpline: 0845 604 0105.

Taking out of service and storing

Unplug the TV from the mains and pack the TV in an

appropriate cardboard box. Remove the batteries from

the remote control and pack the remote control with

the TV set.

NOTE: The TV set should be stored in a dry and

dust-free room.

Connection to a Television Distribution

System (Cable TV etc.) from Tuner

Device connected to the protective earthing of the

building installation through the mains connection or

through other apparatus with a connection to protective

earthing-and to a television distribution system using

coaxial cable, may in some circumstances create a

ﬁ re hazard.

Connection to a cable distribution system has therefore

to be provided through a device providing electrical

isolation below a certain frequency range (galvanic

isolator, see EN 60728-11).

Safety Information

IMPORTANT - Please read these instructions fully before installing or operating

Symbols in this Instruction Book

The following symbols are used in the Instruction

Book as a marker for restrictions and precautions and

safety instructions. Note such information for security

reasons.

WARNING

If you do not pay attention to such a marked warning, it

can cause serious injury or death. Note these warnings

strictly, in order to ensure a safe operation.

IMPORTANT

Warnings on the appliance and restrictions are displayed

like this. Read this information strictly in order to operate

the system correctly and avoid damage.

NOTE

Information about the operation and additional

explanations are marked like this. To be aware of such

information is recommended to ensure that the functions

can be used optimally.

01_MB65_[GB]_IDTV (ARGOS)_BRONZE18_3902UK_46940LED_10079642_50221131.indd 6 01.06.2012 16:50:39

For any help concerning set up and use of your TV please call the Customer Helpline: 0845 604 0105

Getting Started

Support

Technical experts are available 7 days a week

Simple help and advice on setting up your digital •

equipment (image).

Guidance on connecting other devices to your •

television such as a DVD player, Sky, home

cinema

system or a games console.

Order spare parts, including that lost remote •

control.

Any other technical issues you may need •

assistance with.

Call us today: 0845 604 0105

Local call rates applies*

Lines open 9am-8pm Monday to Saturday and 10am-4pm Sunday.

*Calls to Argos enquiry lines may attract a charge and set up fee from residential

lines depending on your call plan/tariff. Mobile and other providers costs may vary,

see www.bt.com/pricing for details.

For Security and training purposes, telephone calls to and from customer service

centres maybe recorded and monitored. Calls from Republic of Ireland will attract

international call charges.

01_MB65_[GB]_IDTV (ARGOS)_BRONZE18_3902UK_46940LED_10079642_50221131.indd 7 01.06.2012 16:50:40

For any help concerning set up and use of your TV please call the Customer Helpline: 0845 604 0105

Remote controlled colour LED TV.•

Fully integrated Terrestrial digital TV (DVB-T - •

MPEG2)

HDMI connectors for digital video and audio. •

This connection is also designed to accept high

deﬁ nition signals.

USB input.•

1000 programmes (analogue+digital).•

On Screen Display (OSD) menu system.•

Integrated tuner DVB-T MPEG 2 compatible.•

Scart socket for external devices (such as video, •

video games, audio set, etc.).

Stereo sound system. (German+Nicam)•

Teletext, fastext, TOP text.•

Headphone connection.•

Automatic programming system.•

Forward or backward manual tuning.•

Sleep timer / Child lock.•

Automatic sound mute when no transmission.•

NTSC playback. •

AVL (Automatic Volume Limiting).•

Auto power down.•

PLL (Frequency Search).•

PC input. •

Plug&Play for Windows 98, ME, 2000, XP, Vista, •

Windos 7.

Game Mode •

Remote Control

Batteries: 2 x AAA

Instruction Book

Quick Start Guide

Digital Tuning Guide

Cable Holder

SIDE AV Connection Cable

Getting Started

TV - Features

Accessories included

Optional Accessories

Wall mount bracket

NOTE:You should check the accessories after

purchasing. Make sure that each accessory is

included.

01_MB65_[GB]_IDTV (ARGOS)_BRONZE18_3902UK_46940LED_10079642_50221131.indd 8 01.06.2012 16:50:40

For any help concerning set up and use of your TV please call the Customer Helpline: 0845 604 0105

Getting Started

Viewing remote control

Standby1.

Mono/Stereo - Dual I-II / Current language2.

Image size / Expand (in TXT mode)3.

Green button4.

Red button 5.

Numeric buttons6.

Teletext - Mix7.

Cursor left8.

Menu on/off9.

AV / Source10.

Favourite mode selection11.

Volume up12.

Info / Reveal (in TXT mode)13.

Mute14.

Volume down15.

Programme down / Page up16.

Electronic Programme Guide (EPG)17.

Programme up / Page down18.

Sleep timer19.

Picture mode selection20.

OK / Select / Hold (in TXT mode) / Channel list21.

Cursor down22.

Return / Index page (in TXT mode)23.

Cursor right / Subpage (in TXT mode)24.

Cursor up25.

Previous programme26.

Yellow button27.

Blue button28.

No function29.

Subtitle on-off / TXT subtitle (analogue TV mode) / 30.

Subtitle (in Media Browser mode)

SCREEN

LANG

SUBTITLE

PIP

RETURN

SOURCE

FAV

PRESETS

SLEEP

INFO

EPG

V+

V-

P-

P+

7 8

RC 3902

01_MB65_[GB]_IDTV (ARGOS)_BRONZE18_3902UK_46940LED_10079642_50221131.indd 9 01.06.2012 16:50:40

For any help concerning set up and use of your TV please call the Customer Helpline: 0845 604 0105

Getting Started

TV - Control buttons (left side)

1. Standby ( ) button

Turns the TV on when in standby mode or turns

the TV off into standby mode.

2. TV/AV button

Changes the operation of “Up” and “Down”

buttons.

3. Programme Up/Down buttons

Moves up/down a channel.

4. Volume Up/Down buttons

Increases/decreases the volume.

NOTE: If you switch on your TV via PROGRAMME

UP/DOWN buttons on the remote control or on the

TV set, the programme that you were watching last

will be reselected.

NOTE:Press “ ” / “ ” buttons at the same

time to view main menu.

Standby-LED

01_MB65_[GB]_IDTV (ARGOS)_BRONZE18_3902UK_46940LED_10079642_50221131.indd 10 01.06.2012 16:50:40

For any help concerning set up and use of your TV please call the Customer Helpline: 0845 604 0105

Getting Started

Aerial connection

Connect the “aerial” or “cable TV” plug to AERIAL

INPUT (ANT.) socket located on the back of the

TV (ﬁ g.1).

Switching the TV On and Off

Switching the TV On

With power cord plug connected to the mains power

socket, the TV is in ‘Standby’ mode.

To switch the TV on from standby mode:

Connect the power cord to the 220-240V AC 50 Hz.

Then the standby LED lights up. (The led will blink

during the standby On/Off)

To switch on the TV from standby mode either:

a. Press the “ ” button, P+ / P- or a numeric button on

the remote control.

b. Press the “ ”, - or + button of the TV.

By either method the TV will switch on.

AAA/R3 x 2

Batteries

Switching the TV Off

Press the “ ” button on the remote control or press

the “

” switch on the TV, the TV will switch to standby

mode.

To turn off the TV completely, remove the power

cord plug from the mains power socket.

NOTE: When the TV is in standby mode, the standby

LED can blink to indicate that features such as Standby

Search, Over Air Download or Timer is active.

NOTE: If you switch on your TV via P +/- buttons on

the remote control or +/- on the TV set, the programme

that you were watching last will be reselected.

ﬁ g.1

ﬁ g.2

Power connection

IMPORTANT :The TV set is designed to operate on

220-240V AC, 50 Hz.

Please note: After unpacking, allow the TV to reach

ambient room temperature before connecting the TV

to the mains power socket.

Connect the power cord plug to the mains power

socket.

The LED on the front of the TV then lights up, this

indicates that the TV is in ‘Standby’ mode.

Remote control - Inserting batteries

Remove the battery cover on the back of the remote

control, gently push down and pull backwards at the

same time as shown.

Insert two AAA/R3 or equivalent type batteries. Ensure

the batteries are inserted the correct way and replace

the battery cover (ﬁ g.2).

NOTE: When the remote control is not going to

be used for long periods of time, the batteries should

be removed. Otherwise the remote control may be

damaged, caused by battery leakage and corrosion.

Wall Mounting

When wall mounting please ensure you use a compatible

wall mount (not supplied). This TV conforms to the VESA

mounting speciﬁ cations and is 400 x 400mm.

Screw size is given on the speciﬁ cation page.

01_MB65_[GB]_IDTV (ARGOS)_BRONZE18_3902UK_46940LED_10079642_50221131.indd 11 01.06.2012 16:50:41

For any help concerning set up and use of your TV please call the Customer Helpline: 0845 604 0105

Getting Started

Operation using TV control buttons

The main menu OSD (On Screen Display) cannot

be displayed using the TV control buttons.

The “

”/“ ” buttons will function as volume

up/down as default. Even if you set other functions

for these buttons, the “ ”/“ ” buttons will

return to volume control after a short while.

Volume Setting

Press “

” button to decrease volume or “ ”

button to increase volume, so a volume level scale

(slider) will be displayed on the screen.

Programme Selection

Press “ P/CH + ” button to select the next

programme or “ P/CH - ” button to select the

previous programme.

AV Mode

Hold the TV/AV button for a few seconds, the

“Source” OSD will be displayed.

Operation using Remote control buttons

The remote control is designed to control all the

functions of the model you selected.

Volume Setting

Press “V +” button to increase the volume. Press

“V -” button to decrease the volume. A volume level

scale (slider) will be displayed on the screen.

Programme Selection (Previous or Next

Programme)

Press P- button to select the previous programme.

Press P+ button to select the next programme.

Programme Selection (Direct Access)

Press numeric buttons on the remote control to

select programmes between 0 and 9. The TV will

switch to the selected programme.

To select programmes between 10-500 (IDTV)

or 10-199 (analogue), press the numeric buttons

consecutively.

SCREEN

LANG

SUBTITLE

PIP

RETURN

SOURCE

FAV

PRESETS

SLEEP

INFO

EPG

V+

V-

P-

P+

7 8

RC 3902

01_MB65_[GB]_IDTV (ARGOS)_BRONZE18_3902UK_46940LED_10079642_50221131.indd 12 01.06.2012 16:50:42

For any help concerning set up and use of your TV please call the Customer Helpline: 0845 604 0105

IMPORTANT: Do not turn off the TV while

“First Time Installation” is in operation.

End of the search process, “Choose Region” osd will be

displayed on the screen (if any multiple region variants

are detected).Please select country and region choice

then press OK to continue.

After all the available stations are stored, Channel List will

be displayed on the screen. If LCN (*) is available in your

country, a message appears on the screen which asks

you if you want to sort the channels according to LCN.

In some countries, the order of the channels is arranged

automatically by the broadcaster. This is called logical

channel number (LCN). If the selected country has

LCN support, the channels will be enumerated one

by one, beginning from number 1. You cannot move

any programme to a position after the last saved one.

If you try to do this, both programmes will change their

places. If LCN support is not available, you can move

the channels as you wish.

Press OK button to quit channel list and watch TV.

(*) LCN is the Logical Channel Number system that organizes

available broadcasts in accordance with a recognizable

channel sequence.

Getting Started

Initial set up

When turned on for the ﬁ rst time, the “language selection”

menu appears. The message “Welcome please select

your language!” is displayed in all language options

listed alphabetically as shown below.

Press the “ ” or “ ” button to highlight the required

language, press OK button to select. “First Time

Installation” appears. Use“ ” or “ ” button to set the

required country,

and press “ ” button to select

Search Type. Available search types are Digital

and analog, digital only and analog only. Set the

desired type by using “

” or “ ” button. When

set, press “ ” to select Teletext Language. Use

” or “

” to select the desired Teletext Language.

Afterwards, select “Scan Encrypted” using “

” or

“ ” button. Set “Scan Encrypted” using “ ” or

“ ” button (ﬁ g.4).

Press OK button on the remote control to continue and

the following message will be displayed on the screen

as shown below.

To start “Automatic channel scan” select Yes

(to cancel select No), highlight the item required using

the “

” or “ ” button and press OK button to select.

The IDTV will automatically tune to the UHF or VHF

transmission channels, searching for digital terrestrial

and analogue (if available) TV broadcasts.

01_MB65_[GB]_IDTV (ARGOS)_BRONZE18_3902UK_46940LED_10079642_50221131.indd 13 01.06.2012 16:50:42

For any help concerning set up and use of your TV please call the Customer Helpline: 0845 604 0105

Getting Started

Initial set up

General operation

Press the SOURCE button on the remote control for

switching between the sources.

Information Banner

Whenever you change channel using the P-/P+ buttons

or the numeric buttons, the TV displays the broadcast

picture along with an information banner at the bottom

of the screen.

The information banner can be displayed at any time

while watching TV by pressing the INFO button on the

remote control (ﬁ g.8).

Hint: Not all channels broadcast the programme data. If the

name and time of the programme are not available, then

information banner will be displayed with blanks.

If the selected channel is locked, you must enter the

correct four-digit numeric code to view the channel

(default code is 0000). “Enter PIN” will be displayed on

the screen in such a case.

01_MB65_[GB]_IDTV (ARGOS)_BRONZE18_3902UK_46940LED_10079642_50221131.indd 14 01.06.2012 16:50:46

For any help concerning set up and use of your TV please call the Customer Helpline: 0845 604 0105

Connections

Back connections explained

1. SCART socket

Inputs or outputs for external devices. Connect the

SCART cable between the SCART socket on the

TV and the SCART socket on the external device

(decoder, VCR or DVD player).

NOTE: If an external device is connected via the

SCART socket, the TV will automatically switch to AV

mode.

2. HDMI Input

Connects a device that has an HDMI socket.

The TV can display High Definition pictures

from devices such as a High Deﬁ nition Satellite

Receiver or Blu-ray Player. These devices must

be connected via the HDMI sockets or Component

Socket. No sound connection is needed for an

HDMI to HDMI connection.

3. PC Input (VGA)

Connects a personal computer to the TV. Connect

the PC cable between the PC INPUT on the TV

and the PC output on the PC.

4. RF Input (ANT.)

Connects to aerial (antenna) or cable TV. If you use

a decoder or a media recorder, you should connect

the aerial cable through the device to the TV with

an appropriate aerial cable (see page 10).

5. S/PDIF Coaxial Out

Outputs digital audio signals of the currently

watched source.

Use an SPDIF coaxial cable to trasfer audio

signals to a device that has S/PDIF input.

6. Subwoofer Out

Connects an external, active subwoofer to the

set to give a much deeper bass effect. Use an

appropriate RCA cable to connect the TV set to a

subwoofer unit.

7. PC/YPbPr Audio Inputs

PC/YPbPr Audio Inputs are used for connecting

audio signals of a PC or a device that connects

to the TV via YPbPr. Connect the PC audio cable

between the AUDIO INPUTS on the TV and audio

output of your PC to enable PC audio. Connect

the audio cable between AUDIO INPUTS on the

TV and audio outputs of your device to enable

component audio.

8. Component Video Inputs (YPbPr)

Component Video Inputs (YPbPr) are

used for connecting component video.

You can connect the component video and audio

sockets with a device that has component output.

Connect the component video cables between

the COMPONENT VIDEO INPUTS on on the TV

and the component video outputs of your device.

While connecting, be sure that the letters on your

TV, “Y”, “Pb”, “Pr” correspond with your device’s

connectors.

NOTE: When using the wall mounting kit (optional),

we recommend that you plug all your cables into the

back of the TV before mounting on the wall.

01_MB65_[GB]_IDTV (ARGOS)_BRONZE18_3902UK_46940LED_10079642_50221131.indd 15 01.06.2012 16:50:46

For any help concerning set up and use of your TV please call the Customer Helpline: 0845 604 0105

Connections

Left side connections explained

9. CI Slot

Used to insert a CI card. A CI card allows you to

view all the channels that you subscribe to. For more

information, see “Conditional Access” section.

10. USB Inputs

To connect devices to the TV, providing fast data

exchange. USB will only function in DTV mode.

Use an SPDIF coaxial cable to transfer audio signals

to a device that has S/PDIF input.

11. Headphone

Headphone jack is used for connecting an external

headphone to the system. Connect to the HEADPHONE

jack to listen to the TV from headphones (optional).

12. Side audio-video connection

Side audio-video connection input is used for connecting

video and audio signals of external devices. To make

a video connection, you must use the supplied AV

connection cable for enabling connection. First,

plug singular jack of the cable to the TV’s Side AV

socket. Afterwards, insert your video cable’s (not

supplied) connector into the YELLOW input (located

on the plural side) of the supplied AV connection

cable. Colours of the connected jacks should match.

To enable audio connection, you must use RED and

WHITE inputs of the side AV connection cable. Afterwards,

insert your device’s audio cable’s connectors into the

RED and WHITE jack of the supplied side AV connection

cable. Colours of the connected jacks should match.

Note: You should use audio inputs of side AV connection

cable (RED & WHITE) to enable sound connection

when connecting a device to your TV by using PC or

COMPONENT VIDEO input.

01_MB65_[GB]_IDTV (ARGOS)_BRONZE18_3902UK_46940LED_10079642_50221131.indd 16 01.06.2012 16:50:47

For any help concerning set up and use of your TV please call the Customer Helpline: 0845 604 0105

Connections

HDMI Connections

HDMI lets you enjoy high deﬁ nition digital images

and high quality sound by connecting the TV to

external devices such as DVD players, set top

boxes or gaming equipment (ﬁ g.1).

Power off both the TV and the device before

making any connections.

For more information, refer to your device’s own

instruction book.

After making the connection, switch to HDMI 1 or

HDMI2. See, Input Selection section for more

information on changing sources.

NOTE: HDMI cable is not supplied.

SCART Connections

Most devices support SCART connection. You can

connect a; DVD recorder, VCR or decoder to the TV using

the SCART socket (ﬁ g.2).

Power off both the TV and the device before making any

connections.

For more information, refer to your device’s own instruction

book.

NOTE: The Scart cable is not supplied.

NOTE:If your external device has a S-Video output,

it is possible to connect your external device with a

SCART-S-video adapter (not included) to the scart

input of the TV. First plug the SCART S-Video adapter

to the SCART connector on your TV set. Then, connect

a S-video cable to the SCART socket (via the Scart

S-Video adapter) to the S-video output of your external

device.

VGA Connections

You can connect a computer (PC) to the TV to display

your computer’s screen image on the TV.

Power up both computer and TV before making any

connections.

Use a 15-pin D-sub display cable to connect a PC to

the TV. Use an audio cable between audio inputs on

the left side of the TV and audio output on your PC to

enable sound connection (ﬁ g.3). You will need to use the

supplied SIDE AV CONNECTION cable for connecting

audio signals.

When the connection is made, switch “Source” to “PC-

VGA”. See “Input selection” section.

Set the resolution that suits your viewing requirements.

Resolution information can be found in the “Appendix

parts” .

NOTE: The cable is not supplied.

NOTE: You can use YPbPr to VGA cable (not

supplied) to enable YPbPr signal via VGA input.

WARNING: You cannot use VGA and YPbPr at the same

time.

External device

(not supplied)

HDMI Cable

ﬁ g.1

Scart Cable

(not supplied)

External device

ﬁ g. 2

ﬁ g. 3

PC Input

(back)

Side AV Input

PC VGA Cable

(not supplied)

PC Audio Cable

(not supplied)

Side Audio/Video

Connection Cable

(supplied)

SIDE AV

01_MB65_[GB]_IDTV (ARGOS)_BRONZE18_3902UK_46940LED_10079642_50221131.indd 17 01.06.2012 16:50:48

For any help concerning set up and use of your TV please call the Customer Helpline: 0845 604 0105

Connections

Side AV Connections

You must use the supplied SIDE AV connection cable

for enabling SIDE AV connection.

1. Plug single jack of the cable to the TV’s SIDE AV

socket.

2. Insert your AV cable’s (not supplied) connectors into

the plural part of the SIDE AV connection cable (see

illustration below). Colours of the connected jacks

should match.

3. To enable audio connection, use an audio cable.

Insert your device’s audio cable’s connectors into the

plural part of the SIDE AV connection cable. Colours

of the connected jacks should match (ﬁ g.1).

4. When the connection is made, switch to SIDE AV

source.

5. To listen the TV sound from headphones, connect to

the HEADPHONE jack of theTV.

Using a Conditional Access Module

IMPORTANT: Insert or remove the CI module only

when the TV is SWITCHED OFF.

In order to watch certain digital channels, a conditional

access module (CAM) can be necessary. This module

must be inserted in the CI slot of your TV.

1. Obtain the Conditional Access Module (CAM) and

the viewing card by subscribing to a pay channel

company, then insert those to the TV using the following

procedure.

2. Insert the CAM and then the viewing card to the slot

that is located in the terminal cover at the rear side of

the TV.

3. The CAM should be correctly inserted, it is impossible

to insert fully if reversed. The CAM or the TV terminal

may be damaged if the CAM is forcefully inserted.

4. Connect the TV to the mains supply, switch on and

then wait for few moments until the card is activated.

5. When no module is inserted, “No Common Interface

module detected” message appears on the screen.

You can refer to the module instruction manual for

details of the settings.

ﬁ g. 1

CAM

module

ﬁ g. 2

Camera

Side AV Connection

Cable (supplied)

AV Cable

(not supplied)

Headphone

SIDE AV

01_MB65_[GB]_IDTV (ARGOS)_BRONZE18_3902UK_46940LED_10079642_50221131.indd 18 01.06.2012 16:50:49

For any help concerning set up and use of your TV please call the Customer Helpline: 0845 604 0105

USB Disk Connection

Plug your USB device to the USB input of the TV.

NOTE:

Plug or unplug your USB disk while the TV is switched

off.

If you are going to connect a USB hard disk drive to the

TV set, USB connection cable used between the disk

drive and the TV should have a USB logo and should

be as short as possible.

While formatting a USB hard disk that has 1TB (Tera

Byte) or more ﬁ le capacity, you can experience problems

with the formatting process. In such a case, you should

format the disk with your personal computer and the

formatted disk type should be FAT32.

CAUTION:

Quickly plugging and unplugging USB devices, is a

very hazardous operation. Especially, do not repeatedly

quickly plug and unplug the drive. This may cause

physical damage to the USB player and especially the

USB device itself. Do not pull out USB module while

playing or recording a ﬁ le.

SIDE VIEW USB MEMORY

Connections

2.5” and 3.5” inch (hdd with external power supply)

external hard disk drives are supported.

IMPORTANT

You should back up your files before making any

connections to the TV set in order to avoid any possible

data loss. Note that manufacturer will not be responsible

for any ﬁ le damage or data loss.

It is possible that certain types of USB devices (e.g.

MP3 Players) or USB hard disk drives/memory sticks

may not be compatible with this TV.

The TV supports FAT32 and NTFS disk formatting.

USB Connections

5Vdc

Max:500mA

USB

01_MB65_[GB]_IDTV (ARGOS)_BRONZE18_3902UK_46940LED_10079642_50221131.indd 19 01.06.2012 16:50:49

Page is loading ...

Hitachi L46VF04ULD Owner's manual

Brand: Hitachi

Model: L46VF04ULD

Category: LCD TVs

Type: Owner's manual

Download PDF

report

Hitachi L46VF04ULD Owner's manual

Hitachi L46VF04ULD Owner's manual

Related papers

Other documents