Sub-Zero BI-42SD/S/TH Reference guide

Sub-Zero
Brand
Sub-Zero
Model
BI-42SD/S/TH
Category
Side-by-side fridge-freezers
Type
Reference guide

This manual is also suitable for

Sub-Zero BI-42SD/S/TH is a 42-inch built-in side-by-side refrigerator with a dispenser that offers advanced food preservation and convenience features. Its dual refrigeration system ensures optimal cooling in both the refrigerator and freezer compartments, while the air purification system reduces odors, bacteria, viruses, and ethylene gas, extending the freshness of your food. The dispenser provides easy access to chilled water and ice, and the bright interior lighting illuminates every corner of the unit.

Sub-Zero BI-42SD/S/TH is a 42-inch built-in side-by-side refrigerator with a dispenser that offers advanced food preservation and convenience features. Its dual refrigeration system ensures optimal cooling in both the refrigerator and freezer compartments, while the air purification system reduces odors, bacteria, viruses, and ethylene gas, extending the freshness of your food. The dispenser provides easy access to chilled water and ice, and the bright interior lighting illuminates every corner of the unit.

MODEL OPTIONS
Overlay (framed, flush inset) BI-42SD/O
Stainless (tubular handle)
BI-42SD/S/TH
Stainless (pro handle)
BI-42SD/S/PH
INTERIOR FEATURES
REFRIGERATOR
4 Adjustable glass shelves
1 Stationary glass shelf
1 High-humidity drawer with divider
2 Storage drawers with divider
3 Adjustable door shelves
2 Stationary door shelves
Adjustable dairy compartment
FREEZER
2 Adjustable wire shelves
1 Stationary solid shelf
3 Storage drawers
5 Adjustable door shelves
Automatic ice maker with dispenser
42" Built-In Side-by-Side with Dispenser
subzero.com
ACCESSORIES
• Grilles for 83" or 88" finished height
(84" is standard).
• Framed front panels in white or stainless
steel.
• Flush inset panels in stainless steel with
tubular or pro handles.
• Custom front panel mounting kit.
• Side panel in white or stainless steel.
• Stainless steel tubular and pro handles.
• Full-length standard and extended
framed handles.
• Stainless steel kickplate.
• Partial framed kit for stainless steel
panels above and below dispenser.
• Dozen egg container.
• Replacement air purification cartridge
and water filter.
Accessories avail able through an authorized
Sub-Zero dealer. For local dealer informa-
tion, visit the find a showroom section of our
website, subzero.com.
FEATURES
• Four design options: framed, overlay,
flush inset and stainless steel.
• Dual refrigeration system ensures the
freshest food and energy efficiency.
• Electronic microprocessor constantly
monitors entire unit to ensure proper
food storage environment.
• Air purification system reduces odors,
bacteria, viruses and ethylene gas.
• Advanced water filtration system.
• Dispenser provides ice and chilled water
through the door.
• Illuminated touch control panel.
• Bright interior lighting throughout,
including storage drawer area.
• Adjustable door shelves, spill-proof
glass refrigerator shelves, dairy
compartment and wire freezer shelves.
• Crisper and deli drawers form a lower-
temperature zone ideal for produce and
meats.
• Soft-close glide system on refrigerator
storage drawers.
• Easy-access flip-up grille.
• Informational freshness cards.
• Automatic ice maker with max ice
feature temporarily increases produc-
tion.
Model BI-42SD
42" (1067)
84"
(2134)
4"
(102)
73
3
/4"
(1873)
23
7
/8" (606)
23
7
/8"
(606)
26
1
/4"
(668)
10
3
/8"
(264)
7
1
/2"
(191)
2
3
/8" (60)
HEIGHT DIMENSIONS ±
1
/2" (13)
26
3
/16" (665)
SPECIFICATIONS
PRODUCT
Dimensions 42"W x 84"H x 24"D
Door Clearance
26
3
/4"
Weight 608 lb
CAPACITY
Refrigerator 16.0 cu ft
Freezer 6.4 cu ft
ELECTRICAL
Supply 115 VAC, 60 Hz
Service 15 amp circuit
PLUMBING
Supply
1
/4" OD copper, braided
stainless steel or PEX tubing
Pressure
35–120 psi
Specifications are subject to change without
notice. Visit subzero.com/specs for the most
up-to-date information.
Dimensions may vary ±
1
/8" (3). Dimensions in
parentheses are millimeters unless otherwise
specified.
42" Built-In Side-by-Side with Dispenser
subzero.com
STANDARD INSTALLATION FLUSH INSET INSTALLATION
DIMENSIONS
©Sub-Zero, Inc. all rights reserved. 6/2014
83
3
/4"
(2127)
OPENING
HEIGHT
24" (610)
OPENING
DEPTH
NOTE: Shaded line represents profile of unit.
FRONT VIEW
SIDE
VIEW
TOP VIEW
W
OPENING WIDTH
84"
(2134)
FLUSH
INSET
HEIGHT
1
/4"
(6)
26
3
/16"
(665)
FLUSH
INSET
DEPTH
2
3
/16"
(56)
*3
" (76) typical depth. Shaded areas will be visible and should be finished to match cabinetry.
NOTE: Shaded line represents profile of unit with
3
/4" (19) panel.
FRONT VIEW
SIDE
VIEW
TOP VIEW
FINISHED
CLEATS*
1
1
/
4
"
(32)
W
FLUSH INSET WIDTH
4" (102)
1
1
/4"
(32)
2
3
/16"
(56)
3"
(76)*
TYPICAL
75
1
/2" (1918)
FROM FLOOR
7"
(178)
E
6"
(152)
RIGHT SIDE
OF OPENING
ELECTRICAL
3" (76)
18" (457)
6" (152)
RIGHT SIDE
OF OPENING
AREA EXTENDS
1
/2" (13)
FORWARD ON FLOOR
PLUMBING
44" (1118)41
1
/2" (1054)
Dimensions based on stainless steel model. For flush inset, add
1
/2" (13) to door clearance dimensions.
  • Page 1 1
  • Page 2 2

Sub-Zero BI-42SD/S/TH Reference guide

Sub-Zero
Brand
Sub-Zero
Model
BI-42SD/S/TH
Category
Side-by-side fridge-freezers
Type
Reference guide
This manual is also suitable for

Sub-Zero BI-42SD/S/TH is a 42-inch built-in side-by-side refrigerator with a dispenser that offers advanced food preservation and convenience features. Its dual refrigeration system ensures optimal cooling in both the refrigerator and freezer compartments, while the air purification system reduces odors, bacteria, viruses, and ethylene gas, extending the freshness of your food. The dispenser provides easy access to chilled water and ice, and the bright interior lighting illuminates every corner of the unit.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents