19GSR3000
SOURCE
P.MODE S.MODE SLEEP ASPECT
CC
EPG DISPLAY
MENU EXIT
SWAP
ENTER
MTS ADD/ERASE FAV.
1
4
13
3
8
7
5
2
6
9
16
10
11
12
14
15
17
19
18
20
21
1. POWER
7. MTS
12.DISPLAY
Turns the LED TV on and off (standby
mode).
16. MUTE Turn off the sound temporary.
Press again to turn the sound back.
Press to display the information;
settings and the status of current mode/station
on the screen
In NTSC receiving mode, press to select.
the audio modes to Mono, Stereo or SAP.
In ATSC Digital receiving mode, press to display
the audio selection menu on the screen. Using
the Navigator,button to select the desire
audio mode.
2. SOURCE Press to display the source menu
on the screen. Using the Navigator or
buttons to select the source as desire then
press (ENTER) button to confirm your selection.
Picture Mode, press repeatedly to
select the preset picture modes.
select the presetting sound effect modes.
Sound Mode, press repeatedly to
4. P.MODE
3. S.MODE
set the sleep timer.
Press repeatedly to activate and/or 5. SLEEP
In FAV display mode, press
to increase or delete the highlighted channel
9. ADD/ERASE
Show the list of favorite channels10. FAV.
aspect ratio of screen as desired.
Press repeatedly to select the
6. ASPECT
13. ENTER
14. MENU Displays the setting menu on the screen.
/ Press to move the cursor
within the setting menu.
ENTER
Press the ENTER button to confirm the selection.
Press the "ENTER" button, the check mark will appear to
the channel , and the channel is marked as channel list.
15. EXIT
Press to exit from the setting menu.
19. 0-9 Numeric buttons.
Press repeatedly to activate and/or set
the CC (Closed Caption Display) modes.
8. CC
21. SWAP Return to previous channel.
20.
For direct access a digital TV channel.
(For an example, when access a digital TV
channel number 5-1, press button
"5" + "-" + "1")
17. VOL+/VOL-
18. CH+/CH-
Press to increase or decrease
Press to increase or decrease
the volume level
the channel number
Press to display the Electronic Program
Guide in digital TV channels(Operation in
ATSC mode only functions on signals emitting
from TV station)
11. EPG