2. PROception
  3. PROHDIRIJ11

PROception PROHDIRIJ11 Operating instructions

  • I've read the datasheet for the PROHDIRIJ11 HDMI IR Control Injector. It allows injecting an IR control signal into a long HDMI cable without needing to change the cable, supporting up to 20 meters of cable length. Key features include no need for external power, switchable IR/CEC function, and a 5m IR range. I am ready to answer any questions you have about this device.
  • What is the maximum HDMI cable length supported?
    Does this device require a power supply?
    What functions are available?
    What is the IR range?
    Is it difficult to install?
PROHDIRIJ11
HDMI IR Control Injector.
The PROHDIRIJ11 allows the injecon of an IR control method into a long HDMI cable (up to 20m) without having to
change the exisng HDMI cable.
Simple and easy to use…
The IR Signal can be transmitted in either direction - simply place the receiver
where you want to control from and the blaster where you want the signal to go.
You must set both adaptors to either IR or CEC. When you set the adaptors up it
will transmit via the function you have selected.
Super IR Adaptor over HDMI Cable (Max. 20m)
Contents:
IR Blaster (3.5mm jack plug)
IR Receiver (3.5mm jack plug)
IR Adaptor Unit x 2
Features:
The HDMI IR Injector can be used with most equipment including HDMI
matrixes, splitters, switches and extenders, Blu-ray, DVD etc...
No power is required as the system utilizes the sending and receiving devices.
Switchable IR or CEC (Consumer Electronics Control) function.
Use HDMI minimum standard version 1.2a.
5m IR range.
Plug and play.
20m
5m
HDMI Adaptor
with IR Tx
HDMI Adaptor
with IR Rx
/