PureLink PUR-HTEIII-00 User manual

1

HTE III Owner’s Manual

HDMI 2.0 Ultra HD/4K HDR HDBaseT Extender

with Control, Ethernet and Bi-directional POE

PureLink

TM

535 East Crescent Avenue

Ramsey, NJ 07446

USA

Tel: +1.201.488.3232

Fax: +1.201.621.6118

E-mail: sales@purelinkav.com

www.purelinkav.com

For order support, please contact your local dealer.

For technical support, please contact us at support@purelinkav.com

2

TABLE OF CONTENTS

Chapter 1. Product Overview, Operation & Specification

1.1 Safety Precautions -------------------------------------------------------------- 3

1.2 What’s in the Box --------------------------------------------------------------- 4

1.3 Product Introduction --------------------------------------------------------------- 4

1.4 Features -------------------------------------------------------------- 4

1.5 Product View and Connection Ports ------------------------------------------------ 5

1.6 Product Specification --------------------------------------------------------------- 5

1.7 Cable Termination -------------------------------------------------------------- 8

1.8 Transmission Distance -------------------------------------------------------------- 10

1.9 Installation Instruction -------------------------------------------------------------- 10

1.10 IR Information -------------------------------------------------------------- 10

Chapter 2. Application Diagram Examples

2.1 Single Source and Single Display Extension --------------------------------- 12

2.2 Multiple Sources with AV Receiver and Single Display Extension ------------ 12

2.3 Multiple Sources with HDMI Switcher and Single Display Extension -------- 13

2.4 Multiple Source with HDMI Matrix Switcher and Multiple Displays Extension 13

2.5 POE Example from Transmitter to Receiver -------------------------------- 14

2.6 POE Example from Receiver to Transmitter -------------------------------- 14

2.7 RS232 Bi-directional Control Example -------------------------------- 14

2.8 IR Bi-directional Control Example -------------------------------- 14

Chapter 3. Additional Information

3.1 Manufacturer’s Warranty (3-Year) ------------------------------------------------- 16

3.2 Customer Service ------------------------------------------------------------------- 16

Manual version

Release date

1.0

1/23/2017

3

Chapter 1. Introduction

1.1 Safety Precautions

 All safety instructions should be read and understood before the unit is operated.

 The owner’s manual and safety instructions should be retained for future reference.

 Unplug this unit from the wall outlet before cleaning. Do not use liquid or aerosol cleaners. Use a damp

cloth only.

 Keep away from wet, magnetic, and flammable surfaces or substances.

 Always use the correct power supply (indicated on the product label) when operating this unit.

 This unit may be equipped with a 3 wire grounding-type plug - a plug having a third (grounding) pin.

This pin will only fit in to a grounding type power outlet. If you are unable to insert the plug in to the

outlet, contact your electrician to replace your obsolete outlet.

 Air vents should be kept clean and unobstructed at all times.

 Please refrain from using frayed power cords and damaged wall outlets.

 Do not place any heavy objects or equipment on top of the unit.

If you experience any malfunctioning of product or have any question as to operation of the

product, please contact our customer service center.

PureLink

TM

Tel: 201.488.3232

Email: support@purelinkav.com

4

1.2 What’s in the Box

Please make sure all of the following items are included in the package:

 1 x HTE III transmitter module

 1 x HTE III receiver module

 1 x Power adapter

 2 x IR blaster

 2 x IR receiver

 1 x User manual

1.3 Product Introduction

The PureLink HTE III HDMI 2.0 Ultra HD/4K HDR HDBaseT extender with IR, RS-232 control and bi-

directional POE. It is a transmitter and receiver set for long distance extension of HDMI video and embedded

audio, with bi-directional control signal (IR and RS232) over single CAT 5/6/7- type cable. It is designed on

HDBaseT technology which allows full 3D support with up to 330ft (100m) at 1080P@60Hz, and 230ft (70m) at

4K (UHD) resolution. It supports 4K60 4:4:4 color format, HDMI 2.0, HDCP 2.2 compliant, HDR and 18 Gbps

data rate. HTE III features PureLink’s proprietary Précis visually loss less light compression technology to

transmit 4K/60 4:4:4 and HDR signal over single CAT cable. A low profile enclosure makes the HTE III ideal for

a limited space environment such as behind a flat-panel display.

1.4 Features

 HDMI 2.0 Ultra HD/4K 60Hz 4:4:4 color format support

 High Dynamic Range (HDR) 10 bits support

 Extends 1080p signal up to 330 ft (100m) and Ultra HD/4K signal up to 230 ft (70m)

 HDCP 2.2 compliant

 High bandwidth up to 18 Gbps

 BT2020 color representation

 Bi-directional POE

- Only one side needs to be locally powered

- Transmitter can power receiver via PoE (Power over Ethernet) or

- Receiver can power Transmitter via PoE (Power over Ethernet)

 IR, RS-232 bi-directional control extension

 CEC pass-through

 Zero loss & Zero noise delivery of digital high definition video and audio signal

 Noise cancellation and error correction logic enhances HDMI video and audio signal

 Supports Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio plus LPCM (up to 192kHz)

 DVI and DisplayPort support via HDMI ports with adapters (sold separately)

 Locking power supply

5

 Low profile design for a limited space environment such as behind a flat panel display

1.5 Product View and Connection Ports

Transmitter

1. 24V/1A power supply unit input connector (locking type)

2. HDBaseT output

3. LED indicator for Tx/Rx interconnection status

- Solid: Good connection between Transmitter and Receiver

- Flashing: Poor connection between Transmitter and Receiver

- Dark: No connection between Transmitter and Receiver

4. LED indicator for signal status

- Solid: HDMI signal with HDCP

- Flashing: HDMI signal without HDCP

- Dark: No HDMI signal

5. HDMI input

6. IR input

7. IR output

8. RS232 port (Tx Ground Rx)

9. Firmware port

10. Ethernet port

11. POWER status LED

6

Receiver

1. 24V/1A power supply unit input connector (locking type)

2. HDBaseT Input

3. LED indicator for Tx/Rx interconnection status

- Solid: Good connection between Transmitter and Receiver

- Flashing: Poor connection between Transmitter and Receiver

- Dark: No connection between Transmitter and Receiver

4. LED indicator for signal status

- Solid: HDMI signal with HDCP

- Flashing: HDMI signal without HDCP

- Dark: No HDMI signal

5. HDMI Output

6. IR input

7. IR output

8. RS232 port (Tx Ground Rx)

9. Firmware port

10. Ethernet port

11. POWER status LED

7

1.6 Product Specifications

General Specification

Power

Input: AC100 – 240V 50/60Hz

Output: DC 24V/1A (US/EU standard,

CE/FCC/UL certified)

Power Consumption

24W (max)

Operational Temperature

32° ~ 117° F (0° to 47° C)

Storage Temperature

- 4° ~ 140° F (-20° to 60° C)

Humidity

0 ~ 90% non-condensing

MTBF

50,000 hours

Dimensions (W x D x H)

7.2'' x 3.5'' x 0.7'' (183 x 88 x 18mm)

Shipping Dimensions (with cover box)

TBD

Weight

Tx: 1.0 lbs (0.45 kg) Rx: 1.0 lbs (0.45 kg)

Shipping Weight

(with accessories and cover box)

TBD

Technical Specification

HDMI Version

HDMI 2.0

HDCP Compliance

HDCP 2.2

Data Rate

18 Gbps

Resolution

Ultra HD/4K up to 4096 x 2160 @50/60Hz (RGB 4:4:4, YCbCr

4:4:4, 4:2:2, 4:2:0)

HDMI Audio

LPCM 2/5.1/7.1 Ch, Dolby Digital+, Dolby TrueHD, Dolby Digital,

Dolby Atmos, DTS:X, DTS-HD Master Audio, DTS 5.1

Transmitter

Inputs: 1 x HDMI Type A [19-pin female]

1 x IR input [3.5mm stereo mini-jack]

1 x RS232 [Phoenix connector]

1 x Firmware [Mini USB]

1 x Ethernet [RJ45]

Outputs: 1 x HDBaseT [RJ45]

1 x IR output [3.5mm stereo mini-jack]

Receiver

Inputs: 1 x HDBaseT [RJ45]

1 x IR input [3.5mm stereo mini-jack]

1 x RS232 [Phoenix connector]

1 x Firmware [Mini USB]

Outputs: 1 x HDMI Type A [19-pin female]

1 x IR input [3.5mm stereo mini-jack]

8

1 x Ethernet [RJ45]

* Signal Travel Range Specification by CAT cable type

*Please use CAT6a/CAT7 cable for maximum distance transmission.

Cable Type

Range

Pixel Clock Rate

Data Rate

Supported Video

CAT5e/CAT6

80 m

<= 225 MHz

<= 5.3 Gbps

(HD Video)

Up to 1080p, 60Hz (Data rates lower than

5.3 Gbps or below 225 MHz TMDS clock)

60 m

> 225 MHz

> 5.3 Gbps

(Ultra HD Video)

1080p 60Hz, 1080p60Hz 3D, and Ultra

HD/4K 60Hz video

CAT6a/CAT7

100 m

<= 225 MHz

<= 5.3 Gbps

(HD Video)

Up to 1080p, 60Hz (Data rates lower than

5.3 Gbps or below 225 MHz TMDS clock)

70 m

> 225 MHz

> 5.3 Gbps

(Ultra HD Video)

1080p 60Hz, 1080p60Hz 3D, and Ultra

HD/4K 60Hz video

1.7 Cable Termination

 CATx (HDBaseT) cable

 RS-232

CATx (HDBaseT) Cable Termination

HTE III Tx/Rx is designed with TIA/EIA-568-B Standard. Please ensure that each PIN layout of the cable is

corresponding with the picture below before connecting the cable. Please note that CAT6 or above level cable

enables to deliver better quality and longer distance.

TIA/EIA-568B

Signal

Wire color

Digital RGB

1

Orange/ White

TMDS Data2+

2

Orange

TMDS Data2-

3

Green/ White

TMDS Data1+

4

Blue

TMDS Data0+

5

Blue/ White

TMDS Data0-

6

Green

TMDS Data1-

7

Brown/ White

TMDS Clock+

8

Brown

TMDS Clock-

9

PureLink offers TotalWire CAT-X high performance cable for your CATx cable needs.

PureLink also offers extended warranty of HTE III Tx/Rx product when CX cables are used

together. For detail information, please contact support@purelinkav.com.

CX SERIES

TOTALWIRE™ CAT-X High Performance Cable

CX-010

Certified CATx Cable with TotalWire Technology - 10m

CX-020

Certified CATx Cable with TotalWire Technology - 20m

CX-030

Certified CATx Cable with TotalWire Technology - 30m

CX-040

Certified CATx Cable with TotalWire Technology - 40m

CX-050

Certified CATx Cable with TotalWire Technology - 50m

CX-070

Certified CATx Cable with TotalWire Technology - 70m

CX-100

Certified CATx Cable with TotalWire Technology - 100m

CX-1000

Certified CATx Cable with TotalWire Technology - 1000' Reel

RS-232 Cable Termination

3-pin Phoenix connector is used for RS-232 communication between HTE III Tx/Rx and connected devices.

* Pinout from the left

RS-232

1

Tx

2

Ground

3

Rx

10

1.8 Transmission Distance

The maximum transmission distance up to 230ft (70m), use lower resolution won’t extend longer distance

If connection through the wall socket, the cable length must less 5 meters between HDMI extender

and wall jack, as below drawing:

1.9 Installation and Connection Instructions

1. Turn off both the video source and the display before connecting any cables.

2. Connect CATx cable between the HTE III transmitter and the HTE III receiver.

3. Connect HDMI cable between the source and the HTE III transmitter AND the

HTE III receiver and the display.

4. Connect the power supply unit to both HTE III transmitter and receiver module.

5. Turn on Display.

6. Turn on Video Source.

1.10 IR Information

11

- IR Blaster is always on the end point (display)

- Use the remote control of the end point device facing the IR receiver.

NOTE: Infrared receiving areas of devices can be located by shining a flashlight onto the front of the device –

the sensor should be able to be seen through the plastic as a small, round object inside. Insert 3.5mm jacks of

IR RX receivers into RX ports, making sure the receivers themselves are placed in clear view to receive an

infrared signal from the remote handset used to control the display outputs.

12

Chapter 2. Application Diagram Examples

2.1 Single source and single display extension

2.2 Multiple HDMI sources with AV receiver and single display extension

13

2.3 Multiple sources with HDMI switcher and single display extension

2.4 Multiple sources with HDMI matrix switcher and multiple displays extension

14

2.5 POE example from Transmitter to Receiver

2.6 POE example from Receiver to Transmitter

2.7 RS232 bi-directional control example

15

2.8 IR bi-directional control example

16

Chapter 3. Additional Information

3.1 Manufacturer’s Warranty (3-Years)

PureLink warrants this HTE III Tx/Rx extender to be free from defects in workmanship and materials,

under normal use and service, for a period of three (3) year from the date of purchase from PureLink or its

authorized resellers.

If the product does not operate as warranted during the applicable warranty period, PureLink shall, at its

option and expense, execute one of the following as necessary:

1. Repair the defective product or part

2. Deliver to customer and equivalent product or part to replace the defective item

3. Refund to customer the purchase price paid for the defective product

All products that are replaced become the property of PureLink. Replacement products may be new or

reconditioned. Repaired or replacement products or parts come with a 90-day warranty or the remainder

of the warranty period. Dtrovision shall not be responsible for any software, firmware, information, or

memory data loss of contained in, stored on, or integrated with any products returned to Dtrovision for

repair under warranty.

3.2 Customer Service

Any customer service inquiries can be submitted electronically through the Q&A form on our website

( www.purelinkav.com ).

For immediate assistance please contact us at (201) 488-3232 to reach our customer care or tech support

team.

PureLink PUR-HTEIII-00 User manual

This manual is also suitable for

PureLink PUR-HTEIII-00 User manual

Related papers

Other documents