Better Bathrooms BeBa_27589 Mirrored Bathroom Cabinet User manual

Brand: Better Bathrooms

Model: BeBa_27589 Mirrored Bathroom Cabinet

Type: User manual

WALL MOUNTED LED MIRRORED

CABINET WITH SHAVER SOCKET

BeBa_26152

BeBa_27589

• TOUCH CONTROL

• ADJUSTABLE STAINLESS-STEEL BUFFER HINGE

• IP44 INGRESS PROTECTION

• ALUMINIUM ALLOY CABINET

CONGRATULATIONS ON YOUR PURCHASE

Our aim at Better Bathrooms is to bring you extraordinary bathroom products, for less.

If you’re after a modern, traditional, or a totally unique style bathroom, we have the fittings

and fixtures to bring your ideas to life, so you can fall in love with your space every day.

We hope you’re happy with your new product. But if you experience any problems, we’re

always here to help.

• Call our friendly UK call centre on 0330 390 3062

(Lines open 9am-4.30pm Monday to Friday, or 9am-2pm Saturday).

• Send us a message via betterbathrooms.com.

CONTENTS

SAFETY

BATHROOM ZONES

PARTS SUPPLIED

TOOLS REQUIRED

INSTALLING THE CABINET

DOOR ADJUSTMENT

SHELF ADJUSTMENT

OPERATION

CLEANING AND MAINTENANCE

TECHNICAL SPECIFICATIONS

SAFETY

• This cabinet should be installed by a qualified electrician.

• This fitting is only suitable for connection to a 220-240V earthed supply in accordance

with current IEE wiring regulations, and should be installed in accordance with local

Building Regulations.

• This is for domestic, indoor use only.

• The cabinet should be connected to a dedicated lighting circuit which must be

protected by a 5-amp fuse (or a 6 amp miniature circuit breaker).

• The electrical connection must be an adequate distance from the rear of the cabinet

to prevent the risk of shorting with the cabinet’s casing.

• Before installing the fitting ensure that the mains supply is switched off, and that the

appropriate fuse is removed (or appropriate circuit breaker is switched off) before

commencing installation. Ensure that measures are taken to prevent the supply from

being inadvertently reconnected.

• If there is a “Minimum Distance” label, please do not allow flammable materials to

rest within that distance from the unit.

• This product may contain delicate parts – be careful during handling and

maintenance to avoid breakage.

• Ensure the cover for the shaver socket is closed when not in use to prevent moisture

from entering it.

• Only connect items designed to be used with a shaver socket (Such as shavers or

electric toothbrushes).

• The shaver socket is not earthed and provides 230V at a maximum current of 80mA.

Do not connect devices which require a higher current, different voltage, or an earth

connection.

• If any modification is made to the fitting it will invalidate the warranty and may

render the product unsafe.

• A defective appliance may cause electric shock. Never switch on a defective or

damaged appliance. Disconnect the appliance from the mains before seeking

assistance.

• This product is IP44 rated, and no part of the installation is allowed to be within

bathroom Zones 0 or 1. Installation is permitted within Zone 2.

• This product must be earthed. Before commencing installation, ensure that there are

no pipes or wires located behind the wall that may be damaged during drilling.

• Ensure that the hanging location has been decided upon and marked clearly to avoid

unwanted damage to the wall due to incorrect positioning.

• Inspect the cabinet to ensure there are no signs of damage prior to installation.

• Take care unpacking, do not use a sharp blade to open as this may damage the

product and void your warranty.

• Once installed a bead of silicon can be applied between the cabinet and the wall

across the top and sides of the unit. Never seal the bottom of the cabinet to the wall,

as this may allow water to accumulate behind the unit.

BATHROOM ZONES

Zone 0:

The interior of the bathtub or shower basin.

Zone 1:

The area around the bathtub or shower basin up

to a height of 2.25m above the floor

Zone 2:

The area stretching to 0.6m outside the bath or

shower and above the bath or shower if over

2.25m

PARTS SUPPLIED

WALL PLUGS (X4)

SCREWS M4 (X4)

ALUMINIUM BAR (X1)

PLEASE NOTE: It is the installers responsibility to ensure that the fittings are suitable for the type of wall.

Alternative fittings may be required (Not Supplied). If unsure professional advice should be sought.

TOOLS REQUIRED tool

TAPE MEASURE

SPIRIT LEVEL

ELECTRIC DRILL

SCREWDRIVER

HAMMER

8mm DRILL BIT

PENCIL

INSTALLATION

The cabinet is supplied with a hanging bar to mount the cabinet onto the wall. At

the back of the cabinet there is a corresponding bar which is designed to slot onto

the hanging bar.

1. Choose the desired position of the cabinet, and from that determine the

required position of the hanging bar.

2. Hold the hanging bar in position, using a spirit level to ensure it is level.

3. Use a pencil to mark the position of the 3 holes on the wall.

4. Place the hanging bar to one side, and drill the holes with a suitable drill bit.

5. Insert wall plugs into the holes, ensuring they are flush to the wall.

6. Place the hanging bar onto the wall, lining up the 3 holes with the wall plugs.

7. Secure the hanging bar to the wall using the supplied screws.

8. You will now be able to hang the cabinet. Carefully lower the cabinet onto the

hanging bar, ensuring that is secure and will not slide.

9. Open the cabinet door and mark the wall with a pencil through the security

hole on the back panel.

10. Remove the cabinet, drill the hole then place a wall plug into the hole you

have just drilled.

11. Hang your cabinet back up onto the hanging bar and ensure that the in the

cabinet is lined up with the wall plug.

12. The cabinet should now be connected to a suitable fused spur following

current regulations and guidance. We would advise for this to be situated

directly behind the cabinet below the hanging bar. When connecting ensure

that enough cable is left to allow the cabinet to be safely removed from the

hanging bar.

13. Secure the cabinet to the wall using a screw through the security hole and

into the wall plug you previously installed.

DOOR ADJUSTMENT

If the door is not level, you can

adjust it using the hinge screw.

Turning the screw clockwise

will push the door right, and

turning anticlockwise will pull it

right.

SHELF ADJUSTMENT

Loosen the snap screw on the shelf to adjust the

shelf position.

Once the shelf is in the correct position and level

the screw should then be re tightened.

OPERATION

Touch the button once to turn on the lights.

Touch the button again to turn the lights off.

SHAVER SOCKET

Your cabinet comes with an inbuilt shaver socket located inside

of the unit. This socket is only designed for use with shavers

and other low voltage items designed to be powered from a

shaver socket.

Once the cabinet is connected to the mains, the shaver socket

is ready to use.

CLEANING AND MAINTENANCE

Never use products containing bleach or abrasive cleaners, as these will have a

detrimental effect on the appearance and lifespan of the product.

Use a clean micro fiber cloth to clean the mirror.

DISPOSAL

Recycling facilities are now available for all customers at which you can

deposit your old electrical products. Customers will be able to take any old

electrical equipment to participating sites run by their local councils.

Please remember that this equipment will be further handled during the

recycling process, so please be considerate when depositing your

equipment. Please contact the local council for details of your local

household waste recycling centers.

At the time of printing the product contains no substances listed within Annex XIV of the

Reach Regulations (EC) 1907/2006. In accordance with Article 59 of the same regulation the

following substances are contained within the product at permitted levels: Cadmium.

As a responsible manufacturer the regulations are monitored to ensure continued

compliance. Further information can be provided upon request.

TECHNICAL SPECIFICATION

Model

BeBa_26152

BeBa_27589

WxHxD (mm)

800x700x135

600x700x135

Net Weight (Kg)

20.2

Power Cord

length (cm)

100

Rated Power (W)

IP Rating

IP44

Input

220 - 240V, 50 Hz

Shaver Socket

Output

230V, 50Hz, 80mA

This product contains a light source of energy efficiency class F.

Better Bathrooms BeBa_27589 Mirrored Bathroom Cabinet User manual

Better Bathrooms BeBa_27589 Mirrored Bathroom Cabinet User manual

Better Bathrooms BeBa_27589 Mirrored Bathroom Cabinet User manual

Related papers

Other documents