Clinton Electronics CE-EX16 Quick start guide

Type
Quick start guide
RTSP / ONVIF Quick Setup Guide
*The ONVIF feature is not available on all DVRs.
1. From the main menu on the DVR, click the Network Setup button.
2. Click the RTSP SERVER tab.
3. Set the TCP Port, User & Password information as desired.
4. Enter the RTSP address into a network stream. If prompted for
login information, use the credentials that were setup in step #3.
To disable the RTSP stream, toggle the RTSP SERVER from ON to OFF.
To disable the ONVIF feature, toggle the ONVIF CHANNEL from ON to OFF.
1. Using your software of choosing, scan the network for ONVIF devices, and select the DVR.
2. If prompted for login information, use the CLIENT or “remote” credentials that were setup during installation. Default CLIENT login is remote,
default password is 1111. (this information can be found in the Setup Menu > Account > Client)
3. If a port number is required, use 8000.
Network Setup
RTSP Setup
ONVIF Setup
Technical Support:
1-800-549-6393
Monday~Friday 8am~5pm (Central Standard Time)
Clinton Electronics
6701 Clinton Road
Loves Park, IL 61111 www.clintonelectronics.com
v.07.12.21
1
2
3
rtsp://192.168.xxx.xxx:554/main/ch0
rtsp://192.168.xxx.xxx:554/main/ch1
NOTE:
The RTSP address is a Local address (must be on the same network as the DVR). To connect externally (outside the network) Port
Forwarding may need to be setup. Contact Clinton Technical Support for more information.
The cameras will start at 0. Example:
4
Camera 1:
Camera 2:
Camera 15:
Camera 16:
rtsp://192.168.xxx.xxx:554/main/ch14
rtsp://192.168.xxx.xxx:554/main/ch15
NOTE:
This information will vary from one software company to another. Consult your network device software manual for detailed information
on scanning and connecting to ONVIF devices.
  • Page 1 1

Clinton Electronics CE-EX16 Quick start guide

Type
Quick start guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI