Corroseal 800332 User manual

Cleaner

Concentrated Non-Solvent Degreaser

Recommended for prepping rusted metal surfaces for Corroseal® Rust Converter Application

Non-solvent, non-corrosive and non-ammable cleaner and degreaser. Easily loosens

oils, grease and other solids from full suspension and removal from a variety of surfaces.

Mild pH to use on most water safe surfaces. Can be diluted for all cleaning tasks.

Applications

• Concrete and brick

• Counter tops

• Equipment

• Plastic / vinyl

• Pressure washing

• Mop and bucket

Instructions

Metal, concrete and brick cleaning

Dilute 16 ounces Corroseal® Cleaner with one gallon tap water and apply with sprayer or brush to

surface. Allow to penetrate 5-10 minutes, then agitate with sti brush and rinse clean.

Floor and general cleaning

Dilute 2 ounces Corroseal® Cleaner with one gallon tap water. Mop as usual, then rinse clean.

Pressure Washer

Dilute 8-12 ounces Corroseal® Cleaner per gallon in tap water depending on soil content. Spray

onto surface. Let soak ten minutes then rinse clean.

See website for additional information.

• Windows and walls

• Plexiglas and fiberglass

• Soak tank cleaning

• Hoods and exhaust fans

• Most painted surfaces

• Pre-paint surface prep

www.corroseal.com • Rodda Paint Co. • 6107 N. Marine Drive, Portland, OR 97203 • 1-800-237-1573

Safely Cleans Metal • Concrete • Plastic • Most Painted Surfaces