Optoma Optoma DX606v User manual

1English

Table of Contents ...................................................................................1

Usage Notice ..........................................................................................2

Safety Information .........................................................................................2

Precautions....................................................................................................3

Eye Safety Warnings .....................................................................................5

Introduction.............................................................................................6

Product Features ...........................................................................................6

Package Overview.........................................................................................7

Product Overview ..........................................................................................8

Main Unit ................................................................................................................ 8

Control Panel ......................................................................................................... 9

Connection Ports ................................................................................................. 10

Remote Control .................................................................................................... 11

Installation ............................................................................................12

Connecting the Projector .............................................................................12

Connect to Computer/Notebook .......................................................................... 12

Connect to Video Sources ................................................................................... 13

Powering On/Off the Projector .....................................................................14

Powering On the Projector ................................................................................... 14

Powering Off the projector ................................................................................... 15

Warning Indicator ................................................................................................. 15

Adjusting the Projected Image.....................................................................16

Adjusting the Projector’s Height ........................................................................... 16

Adjusting the Projector’s Zoom / Focus ............................................................... 17

Adjusting Projected Image Size ........................................................................... 17

User Controls ....................................................................................... 18

Control Panel & Remote Control .................................................................18

On-screen Display Menus ...........................................................................21

How to operate .................................................................................................... 21

Menu Tree ............................................................................................................ 22

Image ................................................................................................................... 23

Display ................................................................................................................. 28

Setup .................................................................................................................... 31

Options ................................................................................................................. 37

Appendices...........................................................................................41

Troubleshooting ...........................................................................................41

Image Problems .................................................................................................. 41

Intermission Problems ........................................................................................ 44

Projector Status Indication .................................................................................. 44

Remote Control Problems ................................................................................... 46

Replacing the Lamp.....................................................................................47

Compatibility Modes ....................................................................................49

Ceiling Mount Installation ............................................................................50

Optoma Global Ofces ................................................................................51

Regulation & Safety notices ........................................................................53

Table of Contents

2

English

Usage Notice

Safety Informations

The lightning ash with arrow head within an equilateral triangle is

intended to alert the user to the presence of uninsulated “dangerous

voltage” within the product’s enclosure that may be of sufcient magni-

tude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert

the user to the presence of import operating and maintenance (servicing)

instructions in the literature accompanying the appliance.

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT

EXPOSE THE PROJECTOR TO RAIN OR MOISTURE. DANGEROUS HIGH

VOLTAGES ARE PRESENT INSIDE THE ENCLOSURE. DO NOT OPEN THE

CABINET. REFER SERVICING TO QUALIFIED PERSONNEL ONLY.

Class B emissions limits

This Class B digital apparatus meets all requirements of the Canadian Inter-

ference-Causing Equipment Regulations.

Important Safety Instruction

1. Read these instructions –before using this projector.

2. Keep these instructions –for future reference.

3. Follow all instructions.

4. Install in accordance with the manufacturer’s instructions :

A. Do not block any ventilation openings. To ensure reliable

operation of the projector and to protect it from overheating, put the

projector in a position and location that will not interfere with its proper

ventilation. For example, do not place the projector on a bed, sofa,

carpet, or similar surface that may block the ventilation openings. Do not

put it in an enclosure, such as a bookcase or a cabinet that may keep air

from owing through its ventilation openings.

B. Do not use this projector near water or moisture. To reduce

the risk of re or electric shock, do not expose the projector to rain or

moisture.

C. Do not install near any heat sources, such as radiators, heaters,

stoves or other apparatus (including ampliers) that produce heat.

5. Clean only with a dry cloth.

6. Only use attachments/accessories specied by the manufacturer.

7. Refer all servicing to qualied service personnel. Servicing is required

when the projector has been damaged in any way, such as:

 Power supply cord or plug is damaged.

 Liquids have spilled or objects have fallen into the apparatus.

 The projector has been exposed to rain or moisture, does not operate

normally, or has been dropped.

Do not attempt to service this projector yourself. Opening or removing

covers may expose you to dangerous voltages or other hazards. Please

call Optoma to be referred to an authorized service center near you.

8. Do not let objects or liquids enter the projector as they may touch

dangerous voltage points or short-out parts that could result in a re or

electric shock.

9. See projector enclosure for safety related markings.

10. The projector should not be adjusted or repaired by anyone except prop-

erly qualied service personnel.

3English

Usage Notice

When the lamp

reaches the end

of its life, the

projector will

not turn back on

until the lamp

module has

been replaced.

To replace the

lamp, follow

the procedures

listed under

“Replacing the

Lamp” section

on pages 47-48.

Precautions

Please follow all warnings, precautions and

maintenance as recommended in this user’s

guide.

▀■ Warning- Do not look into the projector’s lens when the lamp is

on. The bright light may damage your eyes.

▀■ Warning- To reduce the risk of  re or electric shock, do not

expose this projector to rain or moisture.

▀■ Warning- Please do not open or disassemble the projector as

this may cause electric shock.

▀■ Warning- When replacing the lamp, please allow unit to cool

down, and follow all replacement instructions.

See pages 47-48.

▀■ Warning- This projector will detect the life of the lamp itself.

Please be sure to change the lamp when it shows

warning messages.

▀■ Warning- Use the “Lamp Reset” function from the on-screen

display “Options|Lamp Settings” menu after

replacing the lamp module (refer to page 40).

▀■ Warning- When switching the projector off, please ensure the

cooling cycle has been completed before

disconnecting the power. Allow 90 seconds for the

projector to cool down.

▀■ Warning- Do not use the lens cap when projector is in opera-

tion.

▀■ Warning- When the lamp is approaching to the end of its life,

the message “Lamp Warning: Lamp life exceeded.”

will show on the screen. Please contact your local

reseller or service center to change the lamp as soon

as possible.

4

English

Usage Notice

Do:

Turn off the product before cleaning.

Use a soft cloth moistened with a mild detergent to clean the

display housing.

Disconnect the power plug from the AC outlet if the product

is not being used for a long period of time.

Don’t:

Do not block the ventilation slots and openings on the unit.

Do not use abrasive cleaners, waxes or solvents to clean the

unit.

Do not use under the following conditions:

- In extremely hot, cold or humid environments.

- In areas susceptible to excessive dust and dirt.

- Near any appliance that generates a strong magnetic eld.

- In direct sunlight.

5English

Usage Notice

Eye Safety Warnings

▀■ Avoid staring directly into the projector’s beam of light at all

times.

▀■ Minimize standing facing into the beam. Keep your back to

the beam as much as possible.

▀■ Use a stick or laser pointer is recommended to avoid the need

for the presenter to enter the beam.

▀■ Ensure that projectors are located out of the line of sight from

the screen to the audience; this ensures that, when presenters

look at the audience, they do not also have to stare at the pro-

jector lamp. The best way to achieve this is by ceiling-mount-

ing the projector rather than placing it on oor or table top.

▀■ When projector is used in a classroom, adequately supervise

students when they are asked to point out something on the

screen.

▀■ In order to minimize the lamp power needed, use room blinds

to reduce ambient light levels.

6

English

Introduction

Product Features

This product is a single chip 0.55” DLP® projector.

Outstanding features include:

 Texas Instruments Single chip DLP® Technology

 Computer Compatibility:

Apple Macintosh, iMac, and VESA Standards:

UXGA, SXGA+, SXGA, WXGA, XGA, SVGA, VGA

 Video Compatibility:

■NTSC, NTSC4.43

■PAL/PAL-M/PAL-N/SECAM

■SDTV compatible (480i/p, 576i/p)

■HDTV compatible (720p, 1080i)

 Auto source detection with user denable settings

 Full function IR remote control and mouse control

 User friendly multilingual On Screen Menu

 Advanced digital keystone correction and high quality

full screen image re-scaling

 User friendly control interface

 One built-in speaker with 1 Watt amplier

 Macintosh and PC compatible

7English

Introduction

Power Cord 1.8m

IR Remote Control

Package Overview

This projector comes with all the items shown

below. Check to make sure your unit is complete.

Contact your dealer immediately if anything is

missing.

Documentation :



User’s Manual



Warranty Card



Quick Start Card



WEEE Card

Due to the

difference in

applications for

each country,

some regions may

have different

accessories.

2 x AAA Batteries

Projector with lens cap VGA Cable 1.8m

USB Cable 1.8m

(Available in USA and

EMEA version only)

8

English

Introduction

1. Control Panel

2. Zoom

3. Focus

4. Zoom Lens

5. Elevator Button

Main Unit

Product Overview

6. Elevator foot

7. IR Receivers

8. Connection Ports

9. Power Socket

10. Tilt-Adjustment Foot

8

910

7

65

1

2

3

4

7

9English

Introduction

Control Panel

1. Power

2. Power LED

3. Warning LED (Lamp and Temp)

1

2

3

10

English

Introduction

Connection Ports

1. USB Connector (Connect to PC for Remote Mouse function)

2. Audio Input Connector

3. S-Video Input Connector

4. Composite Video Input Connector

5. VGA In/SCART Connector (PC Analog Signal/Component

Video Input, HDTV/SCART Input)

6. Power Socket

7. KensingtonTM Lock Port

1

2345

6 7

11 English

Introduction

Remote Control

1. Button LED

2. Power On/Off

3. No Function Button

4. Page Up

5. Mouse Right Click

6. Four Directional

Select Keys

7. Re-Sync

8. Page Down

9. Volume +/-

10. Zoom

11. AV mute

12. Video Source

13. VGA Source

14. Freeze

15. S-Video Source

16. Contrast

17. Brightness

18. Menu

19. Keystone +/-

20. Source

21. Enter

22. Mouse Left Click

23. PC/Mouse control

24. Number Buttons

(for password input)

1

10

11

1314

3

2

23

15

16

17

19

20

8

21

22

4

7

18 9

12

5

6

24

12

English

Installation

Connecting the Projector

Due to the

difference in

applications for

each country,

some regions may

have different

accessories.

Connect to Computer/Notebook

123

1...............................................................................................................Power Cord

2................................................................................................................VGA Cable

3................................................................................Audio Input Cable (Optional)

4......................................................................USB Cable (for USA & EMEA only)

4

13 English

Installation

Connect to Video Sources

S-Video Output

DVD Player, Set-top Box,

HDTV Receiver

1...............................................................................................................Power Cord

2.......................................................................Composite Video Cable (Optional)

3........................................................................................S-Video Cable (Optional)

4................................ 15-Pin to 3 RCA Component/HDTV Adaptor (Optional)

5.............................. SCART RGB/S-Video Adaptor (Optional for EMEA only)

6....................................................................3 RCA Component Cable (Optional)

7.......................................................................Audio Cable Jack/RCA (Optional)

3

5

3

2

Due to the

difference in

applications for

each country,

some regions may

have different

accessories.

4

Video Output

1

6

7

14

English

Installation

Powering On the Projector

1. Remove the lens cap. 

2. Ensure that the power cord and signal cable are securely

connected.  The Power LED will be ash Green (1.0s on,

1.0s off).

3. Turn on the lamp by pressing “ ” button either on the top

of the projector or on the remote. The Power LED will ash

green (0.5s on, 0.5s off).

The startup screen will display in approximately 10 seconds.

The rst time you use the projector, you can select your

preferred language from quick menu after the startup screen

display.

4. Turn on your source (computer, notebook, video player,

etc.). The projector will detect your source automatically.

If you connect multiple sources at the same time, press

the “Source” button on the remote control to switch

between inputs.

Powering On/Off the Projector

Turn on the

projector rst and

then select the

signal sources.

2Power

Lens Cap

1

Power LED

15 English

Installation

Warning Indicator

 When the lamp fails, the indicator goes red and then the

projector will automatically shut itself down. Please contact

your local reseller or service center. See pages 51-52.

 When the projector has overheated, the indicator ashes red

(1.0s on, 1.0s off). The projector will automatically shut itself

down.

Under normal conditions, the projector can be switched on

again after it has cooled down. If the problem persists, you

should contact your local dealer or our service center.

See pages 51-52.

 When the fan fails, the indicator ashes red (2.0s on, 2.0s

off). Please contact your local dealer or our service center.

See pages 51-52.

Powering Off the Projector

1. Press the “ ” button to turn off the projector lamp, you

will see a message displayed on the projector’s screen.

2. Press the “ ” button again to conrm,

otherwise the message will disappear after 15 seconds.

When you press “ ” button second, the system will show

the timing countdown on the screen.

3. The cooling fans continue to operate for about 10 seconds

for cooling cycle. When the Power LED turn ashing

Green (1.0s on, 1.0s off), the projector has entered standby

mode.

If you wish to turn the projector back on, you must wait

until the projector has completed the cooling cycle and

has entered standby mode. Once in standby mode, simply

press “ ” button to restart the projector.

4. Disconnect the power cord from the electrical outlet and

the projector.

5. Do not turn on the projector immediately following a

power off procedure.

16

English

Installation

Adjusting the Projected Image

Adjusting the Projector’s Height

The projector is equipped with elevator foot for

adjusting the image height.

To raise the image:

1. Press the elevator button .

2. Raise the image to the desired height angle , then release

the button to lock the elevator foot into position.

3. Use screw in foot  to ne-tune the display angle.

To lower the image:

1. Press the elevator button.

2. Lower the image, then release the button to lock the

elevator feet into position.

3. Use screw in foot  to ne-tune the display angle.

Tilt-Adjustment Foot Elevator Foot Elevator Button

31

2

17 English

Installation

Focus Ring

Zoom Ring

Adjusting the Projector’s Zoom / Focus

Adjusting Projection Image Size

You may turn the zoom lever to zoom in or out. To focus the

image, rotate the focus ring until the image is clear. The projector

will focus at distances from 3.9 to 39.4 feet (1.2 to 12.0 meters).

68.8"

(174.8cm)

114.7"

(291.4cm)

160.6"

(407.9cm)

206.5"

(524.5cm)

275.3"

(699.3cm)

30.3"

(76.9cm)

75.7"

(192.3cm)

126.2"

(320.5cm)

176.7"

(448.7cm)

227.1"

(576.9cm)

302.9"

(769.2cm)

3.9'(1.2m)

39.4'(12.0m)

29.5'(9.0m)

23.0'(7.0m)

16.4'(5.0m)

9.8'(3.0m)

27.5"

(69.9cm)

Width

Height

Diagonal

Hd

Screen

(Diagonal)

Max. 30.3” (76.9cm) 75.7” (192.3cm) 126.2” (320.5cm) 176.7” (448.7cm) 227.1” (576.9cm) 302.9” (769.2cm)

Min. 27.5” (69.9cm) 68.8” (174.8cm) 114.7” (291.4cm) 160.6” (407.9cm) 206.5” (524.5cm) 275.3” (699.3cm)

Screen

Size

Max.

(WxH)

24.2” x 18.2”

61.5 x 46.2cm

60.6” x 45.4”

153.8 x 115.4cm

101.0” x 75.7”

256.4 x 192.3cm

141.3” x 106.0”

359.0 x 269.2cm

181.7” x 136.3”

461.5 x 346.2cm

242.3” x 181.7”

615.4 x 461.5cm

Min.

(WxH)

22.0” x 16.5”

55.9 x 42.0cm

55.1” x 41.3”

139.9 x 104.9cm

91.8” x 68.8”

233.1 x 174.8cm

128.5” x 96.4”

326.3 x 244.8cm

165.2” x 123.9”

419.6 x 314.7cm

220.3” x 165.2”

559.4 x 419.6cm

Hd Max. 2.73” (6.9cm) 6.81” (17.3cm) 11.36” (28.8cm) 15.9” (40.4cm) 20.44” (51.9cm) 27.26” (69.2cm)

Min. 2.48” (6.3cm) 6.19” (15.7cm) 10.32” (26.2cm) 14.45” (36.7cm) 18.58” (47.2cm) 24.78” (62.9cm)

Distance 3.9’ (1.2m) 9.8’ (3.0m) 16.4’ (5.0m) 23.0’ (7.0m) 29.5’ (9.0m) 39.4’ (12.0m)

This graph is for user’s reference only.

18

English

User Controls

Control Panel

Control Panel & Remote Control

There are two ways for you to control the functions:

Control Panel and Remote Control.

Using the Control Panel

Power Refer to the “Power On/Off the Projector” section

on pages 14-15.

Power LED Indicate the projector’s status.

Lamp LED

Temp LED

Warning LED

Indicate the projector’s lamp/temperature

status.

19 English

User Controls

Using the Remote Control

Power

Refer to the “Power On/Off the Projector”

section on pages 14-15.

PC/Mouse

control

The PC/Mouse control can be used to con-

trol mouse movement. The mouse function

is enabled using the USB cable to connect

your computer and the projector.

L Button Mouse left click.

R Button Mouse right click.

Page + Use this button to page up.

Page - Use this button to page down.

Enter Conrm your item selection.

Source Press “Source” to select an input signal.

Re-Sync Automatically synchronizes the projector to

the input source.

Four

Directional

Select Keys

Use to select items or make ad-

justments to your selection.

Keystone +/- Adjust image distortion caused by tilting

the projector. (±18 degrees)

Volume +/- Adjust to increase/decrease the volume.

Brightness Adjust the brightness of the image.

Remote Control

20

English

User Controls

Using the Remote Control

Menu

Press “Menu” to launch the on-screen

display (OSD) menu. To exit OSD, Press

“Menu” again.

Zoom Press “+/-” button to zoom in of an image.

Contrast Control the degree of difference between

the lightest and darkest parts of the picture.

VGA Press “VGA” to choose source from VGA

connector.

AV Mute Momentarily turns off/on the audio and

video.

S-Video Press “S-Video” to choose S-Video source.

Freeze Press “Freeze” to pause the screen image.

Video Press “Video” to choose Composite Video

source.

Remote Control

Page is loading ...

Optoma Optoma DX606v User manual

Optoma Optoma DX606v User manual

Related papers

Other documents