Optoma Optoma DX606v User manual

Category
TVs & monitors
Type
User manual
1English
Table of Contents ...................................................................................1
Usage Notice ..........................................................................................2
Safety Information .........................................................................................2
Precautions....................................................................................................3
Eye Safety Warnings .....................................................................................5
Introduction.............................................................................................6
Product Features ...........................................................................................6
Package Overview.........................................................................................7
Product Overview ..........................................................................................8
Main Unit ................................................................................................................ 8
Control Panel ......................................................................................................... 9
Connection Ports ................................................................................................. 10
Remote Control .................................................................................................... 11
Installation ............................................................................................12
Connecting the Projector .............................................................................12
Connect to Computer/Notebook .......................................................................... 12
Connect to Video Sources ................................................................................... 13
Powering On/Off the Projector .....................................................................14
Powering On the Projector ................................................................................... 14
Powering Off the projector ................................................................................... 15
Warning Indicator ................................................................................................. 15
Adjusting the Projected Image.....................................................................16
Adjusting the Projector’s Height ........................................................................... 16
Adjusting the Projector’s Zoom / Focus ............................................................... 17
Adjusting Projected Image Size ........................................................................... 17
User Controls ....................................................................................... 18
Control Panel & Remote Control .................................................................18
On-screen Display Menus ...........................................................................21
How to operate .................................................................................................... 21
Menu Tree ............................................................................................................ 22
Image ................................................................................................................... 23
Display ................................................................................................................. 28
Setup .................................................................................................................... 31
Options ................................................................................................................. 37
Appendices...........................................................................................41
Troubleshooting ...........................................................................................41
Image Problems .................................................................................................. 41
Intermission Problems ........................................................................................ 44
Projector Status Indication .................................................................................. 44
Remote Control Problems ................................................................................... 46
Replacing the Lamp.....................................................................................47
Compatibility Modes ....................................................................................49
Ceiling Mount Installation ............................................................................50
Optoma Global Ofces ................................................................................51
Regulation & Safety notices ........................................................................53
Table of Contents
2
English
Usage Notice
Safety Informations
The lightning ash with arrow head within an equilateral triangle is
intended to alert the user to the presence of uninsulated “dangerous
voltage” within the product’s enclosure that may be of sufcient magni-
tude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert
the user to the presence of import operating and maintenance (servicing)
instructions in the literature accompanying the appliance.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT
EXPOSE THE PROJECTOR TO RAIN OR MOISTURE. DANGEROUS HIGH
VOLTAGES ARE PRESENT INSIDE THE ENCLOSURE. DO NOT OPEN THE
CABINET. REFER SERVICING TO QUALIFIED PERSONNEL ONLY.
Class B emissions limits
This Class B digital apparatus meets all requirements of the Canadian Inter-
ference-Causing Equipment Regulations.
Important Safety Instruction
1. Read these instructions –before using this projector.
2. Keep these instructions –for future reference.
3. Follow all instructions.
4. Install in accordance with the manufacturer’s instructions :
A. Do not block any ventilation openings. To ensure reliable
operation of the projector and to protect it from overheating, put the
projector in a position and location that will not interfere with its proper
ventilation. For example, do not place the projector on a bed, sofa,
carpet, or similar surface that may block the ventilation openings. Do not
put it in an enclosure, such as a bookcase or a cabinet that may keep air
from owing through its ventilation openings.
B. Do not use this projector near water or moisture. To reduce
the risk of re or electric shock, do not expose the projector to rain or
moisture.
C. Do not install near any heat sources, such as radiators, heaters,
stoves or other apparatus (including ampliers) that produce heat.
5. Clean only with a dry cloth.
6. Only use attachments/accessories specied by the manufacturer.
7. Refer all servicing to qualied service personnel. Servicing is required
when the projector has been damaged in any way, such as:
Power supply cord or plug is damaged.
Liquids have spilled or objects have fallen into the apparatus.
The projector has been exposed to rain or moisture, does not operate
normally, or has been dropped.
Do not attempt to service this projector yourself. Opening or removing
covers may expose you to dangerous voltages or other hazards. Please
call Optoma to be referred to an authorized service center near you.
8. Do not let objects or liquids enter the projector as they may touch
dangerous voltage points or short-out parts that could result in a re or
electric shock.
9. See projector enclosure for safety related markings.
10. The projector should not be adjusted or repaired by anyone except prop-
erly qualied service personnel.
3English
Usage Notice
When the lamp
reaches the end
of its life, the
projector will
not turn back on
until the lamp
module has
been replaced.
To replace the
lamp, follow
the procedures
listed under
“Replacing the
Lamp” section
on pages 47-48.
Precautions
Please follow all warnings, precautions and
maintenance as recommended in this user’s
guide.
Warning- Do not look into the projector’s lens when the lamp is
on. The bright light may damage your eyes.
Warning- To reduce the risk of  re or electric shock, do not
expose this projector to rain or moisture.
Warning- Please do not open or disassemble the projector as
this may cause electric shock.
Warning- When replacing the lamp, please allow unit to cool
down, and follow all replacement instructions.
See pages 47-48.
Warning- This projector will detect the life of the lamp itself.
Please be sure to change the lamp when it shows
warning messages.
Warning- Use the “Lamp Reset” function from the on-screen
display “Options|Lamp Settings” menu after
replacing the lamp module (refer to page 40).
Warning- When switching the projector off, please ensure the
cooling cycle has been completed before
disconnecting the power. Allow 90 seconds for the
projector to cool down.
Warning- Do not use the lens cap when projector is in opera-
tion.
Warning- When the lamp is approaching to the end of its life,
the message “Lamp Warning: Lamp life exceeded.”
will show on the screen. Please contact your local
reseller or service center to change the lamp as soon
as possible.
4
English
Usage Notice
Do:
Turn off the product before cleaning.
Use a soft cloth moistened with a mild detergent to clean the
display housing.
Disconnect the power plug from the AC outlet if the product
is not being used for a long period of time.
Don’t:
Do not block the ventilation slots and openings on the unit.
Do not use abrasive cleaners, waxes or solvents to clean the
unit.
Do not use under the following conditions:
- In extremely hot, cold or humid environments.
- In areas susceptible to excessive dust and dirt.
- Near any appliance that generates a strong magnetic eld.
- In direct sunlight.
5English
Usage Notice
Eye Safety Warnings
Avoid staring directly into the projector’s beam of light at all
times.
Minimize standing facing into the beam. Keep your back to
the beam as much as possible.
Use a stick or laser pointer is recommended to avoid the need
for the presenter to enter the beam.
Ensure that projectors are located out of the line of sight from
the screen to the audience; this ensures that, when presenters
look at the audience, they do not also have to stare at the pro-
jector lamp. The best way to achieve this is by ceiling-mount-
ing the projector rather than placing it on oor or table top.
When projector is used in a classroom, adequately supervise
students when they are asked to point out something on the
screen.
In order to minimize the lamp power needed, use room blinds
to reduce ambient light levels.
6
English
Introduction
Product Features
This product is a single chip 0.55” DLP® projector.
Outstanding features include:
Texas Instruments Single chip DLP® Technology
Computer Compatibility:
Apple Macintosh, iMac, and VESA Standards:
UXGA, SXGA+, SXGA, WXGA, XGA, SVGA, VGA
Video Compatibility:
NTSC, NTSC4.43
PAL/PAL-M/PAL-N/SECAM
SDTV compatible (480i/p, 576i/p)
HDTV compatible (720p, 1080i)
Auto source detection with user denable settings
Full function IR remote control and mouse control
User friendly multilingual On Screen Menu
Advanced digital keystone correction and high quality
full screen image re-scaling
User friendly control interface
One built-in speaker with 1 Watt amplier
Macintosh and PC compatible
7English
Introduction
Power Cord 1.8m
IR Remote Control
Package Overview
This projector comes with all the items shown
below. Check to make sure your unit is complete.
Contact your dealer immediately if anything is
missing.
Documentation :

User’s Manual

Warranty Card

Quick Start Card

WEEE Card
Due to the
difference in
applications for
each country,
some regions may
have different
accessories.
2 x AAA Batteries
Projector with lens cap VGA Cable 1.8m
USB Cable 1.8m
(Available in USA and
EMEA version only)
8
English
Introduction
1. Control Panel
2. Zoom
3. Focus
4. Zoom Lens
5. Elevator Button
Main Unit
Product Overview
6. Elevator foot
7. IR Receivers
8. Connection Ports
9. Power Socket
10. Tilt-Adjustment Foot
8
910
7
65
1
2
3
4
7
9English
Introduction
Control Panel
1. Power
2. Power LED
3. Warning LED (Lamp and Temp)
1
2
3
10
English
Introduction
Connection Ports
1. USB Connector (Connect to PC for Remote Mouse function)
2. Audio Input Connector
3. S-Video Input Connector
4. Composite Video Input Connector
5. VGA In/SCART Connector (PC Analog Signal/Component
Video Input, HDTV/SCART Input)
6. Power Socket
7. KensingtonTM Lock Port
1
2345
6 7
11 English
Introduction
Remote Control
1. Button LED
2. Power On/Off
3. No Function Button
4. Page Up
5. Mouse Right Click
6. Four Directional
Select Keys
7. Re-Sync
8. Page Down
9. Volume +/-
10. Zoom
11. AV mute
12. Video Source
13. VGA Source
14. Freeze
15. S-Video Source
16. Contrast
17. Brightness
18. Menu
19. Keystone +/-
20. Source
21. Enter
22. Mouse Left Click
23. PC/Mouse control
24. Number Buttons
(for password input)
1
10
11
1314
3
2
23
15
16
17
19
20
8
21
22
4
7
18 9
12
5
6
24
12
English
Installation
Connecting the Projector
Due to the
difference in
applications for
each country,
some regions may
have different
accessories.
Connect to Computer/Notebook
123
1...............................................................................................................Power Cord
2................................................................................................................VGA Cable
3................................................................................Audio Input Cable (Optional)
4......................................................................USB Cable (for USA & EMEA only)
4
13 English
Installation
Connect to Video Sources
S-Video Output
DVD Player, Set-top Box,
HDTV Receiver
1...............................................................................................................Power Cord
2.......................................................................Composite Video Cable (Optional)
3........................................................................................S-Video Cable (Optional)
4................................ 15-Pin to 3 RCA Component/HDTV Adaptor (Optional)
5.............................. SCART RGB/S-Video Adaptor (Optional for EMEA only)
6....................................................................3 RCA Component Cable (Optional)
7.......................................................................Audio Cable Jack/RCA (Optional)
3
5
3
2
Due to the
difference in
applications for
each country,
some regions may
have different
accessories.
4
Video Output
1
6
7
7
14
English
Installation
Powering On the Projector
1. Remove the lens cap.
2. Ensure that the power cord and signal cable are securely
connected. The Power LED will be ash Green (1.0s on,
1.0s off).
3. Turn on the lamp by pressing “ ” button either on the top
of the projector or on the remote. The Power LED will ash
green (0.5s on, 0.5s off).
The startup screen will display in approximately 10 seconds.
The rst time you use the projector, you can select your
preferred language from quick menu after the startup screen
display.
4. Turn on your source (computer, notebook, video player,
etc.). The projector will detect your source automatically.
If you connect multiple sources at the same time, press
the “Source” button on the remote control to switch
between inputs.
Powering On/Off the Projector
Turn on the
projector rst and
then select the
signal sources.
2Power
Lens Cap
1
Power LED
15 English
Installation
Warning Indicator
When the lamp fails, the indicator goes red and then the
projector will automatically shut itself down. Please contact
your local reseller or service center. See pages 51-52.
When the projector has overheated, the indicator ashes red
(1.0s on, 1.0s off). The projector will automatically shut itself
down.
Under normal conditions, the projector can be switched on
again after it has cooled down. If the problem persists, you
should contact your local dealer or our service center.
See pages 51-52.
When the fan fails, the indicator ashes red (2.0s on, 2.0s
off). Please contact your local dealer or our service center.
See pages 51-52.
Powering Off the Projector
1. Press the “ ” button to turn off the projector lamp, you
will see a message displayed on the projector’s screen.
2. Press the “ ” button again to conrm,
otherwise the message will disappear after 15 seconds.
When you press “ ” button second, the system will show
the timing countdown on the screen.
3. The cooling fans continue to operate for about 10 seconds
for cooling cycle. When the Power LED turn ashing
Green (1.0s on, 1.0s off), the projector has entered standby
mode.
If you wish to turn the projector back on, you must wait
until the projector has completed the cooling cycle and
has entered standby mode. Once in standby mode, simply
press “ ” button to restart the projector.
4. Disconnect the power cord from the electrical outlet and
the projector.
5. Do not turn on the projector immediately following a
power off procedure.
16
English
Installation
Adjusting the Projected Image
Adjusting the Projector’s Height
The projector is equipped with elevator foot for
adjusting the image height.
To raise the image:
1. Press the elevator button .
2. Raise the image to the desired height angle , then release
the button to lock the elevator foot into position.
3. Use screw in foot to ne-tune the display angle.
To lower the image:
1. Press the elevator button.
2. Lower the image, then release the button to lock the
elevator feet into position.
3. Use screw in foot to ne-tune the display angle.
Tilt-Adjustment Foot Elevator Foot Elevator Button
31
2
17 English
Installation
Focus Ring
Zoom Ring
Adjusting the Projector’s Zoom / Focus
Adjusting Projection Image Size
You may turn the zoom lever to zoom in or out. To focus the
image, rotate the focus ring until the image is clear. The projector
will focus at distances from 3.9 to 39.4 feet (1.2 to 12.0 meters).
68.8"
(174.8cm)
114.7"
(291.4cm)
160.6"
(407.9cm)
206.5"
(524.5cm)
275.3"
(699.3cm)
30.3"
(76.9cm)
75.7"
(192.3cm)
126.2"
(320.5cm)
176.7"
(448.7cm)
227.1"
(576.9cm)
302.9"
(769.2cm)
3.9'(1.2m)
39.4'(12.0m)
29.5'(9.0m)
23.0'(7.0m)
16.4'(5.0m)
9.8'(3.0m)
27.5"
(69.9cm)
Width
Height
Diagonal
Hd
Screen
(Diagonal)
Max. 30.3” (76.9cm) 75.7” (192.3cm) 126.2” (320.5cm) 176.7” (448.7cm) 227.1” (576.9cm) 302.9” (769.2cm)
Min. 27.5” (69.9cm) 68.8” (174.8cm) 114.7” (291.4cm) 160.6” (407.9cm) 206.5” (524.5cm) 275.3” (699.3cm)
Screen
Size
Max.
(WxH)
24.2” x 18.2”
61.5 x 46.2cm
60.6” x 45.4”
153.8 x 115.4cm
101.0” x 75.7”
256.4 x 192.3cm
141.3” x 106.0”
359.0 x 269.2cm
181.7” x 136.3”
461.5 x 346.2cm
242.3” x 181.7”
615.4 x 461.5cm
Min.
(WxH)
22.0” x 16.5”
55.9 x 42.0cm
55.1” x 41.3”
139.9 x 104.9cm
91.8” x 68.8”
233.1 x 174.8cm
128.5” x 96.4”
326.3 x 244.8cm
165.2” x 123.9”
419.6 x 314.7cm
220.3” x 165.2”
559.4 x 419.6cm
Hd Max. 2.73” (6.9cm) 6.81” (17.3cm) 11.36” (28.8cm) 15.9” (40.4cm) 20.44” (51.9cm) 27.26” (69.2cm)
Min. 2.48” (6.3cm) 6.19” (15.7cm) 10.32” (26.2cm) 14.45” (36.7cm) 18.58” (47.2cm) 24.78” (62.9cm)
Distance 3.9’ (1.2m) 9.8’ (3.0m) 16.4’ (5.0m) 23.0’ (7.0m) 29.5’ (9.0m) 39.4’ (12.0m)
This graph is for user’s reference only.
18
English
User Controls
Control Panel
Control Panel & Remote Control
There are two ways for you to control the functions:
Control Panel and Remote Control.
Using the Control Panel
Power Refer to the “Power On/Off the Projector” section
on pages 14-15.
Power LED Indicate the projector’s status.
Lamp LED
Temp LED
Warning LED
Indicate the projector’s lamp/temperature
status.
19 English
User Controls
Using the Remote Control
Power
Refer to the “Power On/Off the Projector”
section on pages 14-15.
PC/Mouse
control
The PC/Mouse control can be used to con-
trol mouse movement. The mouse function
is enabled using the USB cable to connect
your computer and the projector.
L Button Mouse left click.
R Button Mouse right click.
Page + Use this button to page up.
Page - Use this button to page down.
Enter Conrm your item selection.
Source Press “Source” to select an input signal.
Re-Sync Automatically synchronizes the projector to
the input source.
Four
Directional
Select Keys
Use to select items or make ad-
justments to your selection.
Keystone +/- Adjust image distortion caused by tilting
the projector. (±18 degrees)
Volume +/- Adjust to increase/decrease the volume.
Brightness Adjust the brightness of the image.
Remote Control
20
English
User Controls
Using the Remote Control
Menu
Press “Menu” to launch the on-screen
display (OSD) menu. To exit OSD, Press
“Menu” again.
Zoom Press “+/-” button to zoom in of an image.
Contrast Control the degree of difference between
the lightest and darkest parts of the picture.
VGA Press “VGA” to choose source from VGA
connector.
AV Mute Momentarily turns off/on the audio and
video.
S-Video Press “S-Video” to choose S-Video source.
Freeze Press “Freeze” to pause the screen image.
Video Press “Video” to choose Composite Video
source.
Remote Control
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54

Optoma Optoma DX606v User manual

Category
TVs & monitors
Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI