13
Handling precautions
General Notes
The N-03B is provided with the
waterproof performance, however, do
not have water entered into the inside
of the unit, or do not spray water over
accessories and optional items.
The FOMA terminal is waterproofed (IPX5 and
IPX7 equivalent) with the external connector
terminal cap firmly closed and installing the
back cover in a locked state, however, it is
not that the FOMA terminal is completely
waterproofed.
Do not attach/remove the battery pack, nor
open/close the external connector terminal
cap or back cover while you are in the rain or
with drops of rain remained on your FOMA
terminal. Otherwise the water entered into
the inside of your FOMA terminal might
cause corrosion of internal parts. Note that
accessories and optional items are not
provided with waterproof performance.
If the trouble with your FOMA terminal is
found to be resulted from such exposure to
water, the guarantee is not supported. In that
case your troubled FOMA terminal is to be
repaired fees charged.
Wipe with a soft and dry cloth (such as a
cloth designed for glasses).
The surface of the FOMA terminal LCD may
be coated to improve the visibility of the
color display. Rubbing the LCD of the FOMA
terminal with a dry cloth to clean it may
scratch the LCD surface. Handle the FOMA
terminal carefully and clean it using a soft dry
cloth (such as a cloth used for glasses). The
LCD coating may peel off or stain if moisture
or dirt is left on the surface for a long period.
Never use chemicals such as alcohol,
thinners, benzene or detergents as these
agents may erase the printing on the
FOMA terminal or cause discoloration.
Occasionally clean the connection
terminals with a dry cotton bud, etc.
Soiled connectors may result in poor
connections, loss of power, or incomplete
charging. Wipe with dry cloth or cotton
swab. When cleaning, take care not to
damage connectors.
Do not place the FOMA terminal near an
air conditioning vent.
Condensation may form due to rapid
changes in temperature, and this may
cause internal corrosion and malfunction.
Do not put excessive pressure on the
FOMA terminal or battery.
Do not put the FOMA terminal in a bag
filled with many objects or sit down with
it in a hip pocket. Excessive pressure may
result in malfunction or damage to the LCD,
internal circuit or the battery pack. Also, if an
external device is connected to the external
connector, excessive pressure may cause
connector breakage or malfunction.
Read the separate manuals supplied
with the FOMA terminal and adapter
carefully.
Do not scratch the display with metallic
objects.
Doing so may cause scratches, malfunction
or damage.
Handling the FOMA Terminal
Avoid using the FOMA terminal in
extremely high or low temperatures.
The ambient temperature of the room should
be 5 to 40 (limited to the temporary
use in a bathroom etc. when temperature is
above 36 ) with humidity of 45% to 85%.
Reception may be affected if you use
your FOMA terminal near a landline
phone, television, or radio in use. Use the
FOMA terminal away from such devices.
Please keep a separate record of the
information you have registered in your
FOMA terminal.
Please be aware that DOCOMO bears no
obligation or responsibility in the event
that data is altered or lost.
Do not drop the FOMA terminal or
expose it to strong shocks.
Doing so may cause malfunction or
damage.
When connecting an external device
to the external connector terminal
(earphone/microphone terminal), do not
insert at an angle or pull the code.
Doing so may cause malfunction or damage.
Do not fold the FOMA terminal with the
strap pinched between the folding parts.
Doing so may cause malfunction or damage.
It is normal for the FOMA terminal to
become warm while being used or
charged. This is not a malfunction. Keep
using it.
Do not leave the camera exposed to
direct sunlight.
Doing so may discolor or burn the
components of the camera.
Introduction