INSTEON Lock Controller Quick start guide
- Type
- Quick start guide
Lock Controller
Quick Start Guide
Lock Controller
Set
Button
Status LEDUnlock
Sent
Lock
Sent
The actual lock state may dier from Lock Controller’s
status LED if the lock has been manually activated.
1
During setup, keep Lock Controller
within 5 feet of your door lock. Use an
extension cord if necessary.
5 Feet
1.5 Meters
Installation
C 1 2SC 1 2S
2
Open the door lock cover and tap
the S button.
C 1 2SC 1 2S
3
Tap the set button on Lock Controller.
Your door lock will double-beep and
the Lock Controller status LED will
turn red.
4
After setup, Lock Controller can be
placed up to 30 feet away from your
door lock.
Up to 30 Feet
9 Meters
Linking to the Hub
Follow your Insteon Hub instructions to add
Lock Controller to your Insteon Hub.
+
Learn More
For the complete Owner’s Manual and
more, visit: insteon.com/support
MANUAL
Rev 06.29.15
Protected under U.S. and foreign patents (see www.insteon.com/patents)
©2015 Insteon
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
INSTEON Lock Controller Quick start guide
- Type
- Quick start guide
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
INSTEON 2242-522 Owner's manual
-
INSTEON Hub (2012) Owner's manual
-
-
-
-
-
-
-
-
