CAB Hermes applicators Operating instructions

Hermes applicators
CAB
Brand
CAB
Model
Hermes applicators
Type
Operating instructions

This manual is also suitable for

CAB Hermes applicators are high-performance labeling machines designed for precise and efficient application of labels onto a wide range of products. With their advanced technology and user-friendly design, these applicators offer a range of capabilities to enhance your labeling processes:

  • Versatility: Suitable for labeling a variety of product shapes and sizes, including round objects, flat surfaces, and irregular contours.

  • Accuracy: Equipped with advanced sensors and control systems to ensure precise label placement and consistent application.

  • Speed: Capable of high-speed labeling, increasing productivity and efficiency in fast-paced environments.

CAB Hermes applicators are high-performance labeling machines designed for precise and efficient application of labels onto a wide range of products. With their advanced technology and user-friendly design, these applicators offer a range of capabilities to enhance your labeling processes:

  • Versatility: Suitable for labeling a variety of product shapes and sizes, including round objects, flat surfaces, and irregular contours.

  • Accuracy: Equipped with advanced sensors and control systems to ensure precise label placement and consistent application.

  • Speed: Capable of high-speed labeling, increasing productivity and efficiency in fast-paced environments.

Edition 1/02
Product Collet - Around Labelling
References for Installation and Operation
2
The product collet - around labelling is developed
to label round pieces as addition to an applicator.
We advise for a correct operation to mount the
product collet on an assembly block.
Scope of Delivery :
- Product Collet (1)
- Power Supply (2)
- Foot Switch (3)
- Connecting Cable to Applicator (4)
- Power Cable (5)
- Assembly Block (6)
Is not a part of the shipment !
6
1
2
3
4
5
3
Installation Instruction :
- Mount the printer on the assembly block at
rst.
- Loose the handholds (12) and push the
interlock (8) to the stopper in the middle of the
plate (9).
- Attach the printer with applicator on the
positioning bolts (7) of the assembly block
The holes in the base plate must be over the
bolts.
- Push the interlock (8) over the curved corner
of the printer and tighten the handholds (12) .
- Attach the product collet (1), adjust it and
tighten the both screws (14) in the
long holes (13 of product collet.
- Connect power supply to product collet by a
connection between power supply cable and
the 4-pin input jack (17).
- Plug in the cable of the foot switch in the 5-pin
input jack (16) of the product collet.
- Connect the product collet to the applicator via
the 15-pin interface (15) by the cable (4).
- Use a grounded power socket for power
supply.
Operation :
- Lay the product (18) which will be labeled on
the roller (19) of the product collet.
- It‘s important that the product are positioned
parallel to the pad of the applicator.
It‘s possible to move the System of printer and
applicator to adjust it parallel to the product via
the two screws (10).
- To adjust the assembly block sideways use
the handhold (11).
9 81087
121210
7
171615
18
1919
11
14 14
1
13 13
copyright by cab / 9008634 / S01 / 1
Technische Änderungen vorbehalten
Inaccordancewithourpolicyofcontinualproductimprovement,wereservetherighttoalterspecicationswithoutnotice
Donnéestechniquesmodiablessanspréavis
20
- Turn the knob (21) to adjust the light sensor for
detectiontheproductforproductspecication.
Thelightsensorworksinthelightreexmode.
Make sure that the environment of the product
collethasn‘ttomuchextraneouslight.
- For applicator installation and adjustment
use the documentation of applicator and
printer.
- To start the labeling procedure use the
foot switch.
21
Gesellschaft für
Computer- und Automations-
Bausteine mbH & Co KG
cab Produkttechnik GmbH & Co KG
Postfach 1904 D-76007 Karlsruhe
Wilhelm-Schickard-Str. 14 D-76131 Karlsruhe
Telefon +49 (0) 721 / 66 26-111
Telefax+49(0)721/6626-119
Web : http://www.cabgmbh.com
e-mail : [email protected]
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

CAB Hermes applicators Operating instructions

Hermes applicators
CAB
Brand
CAB
Model
Hermes applicators
Type
Operating instructions
This manual is also suitable for

CAB Hermes applicators are high-performance labeling machines designed for precise and efficient application of labels onto a wide range of products. With their advanced technology and user-friendly design, these applicators offer a range of capabilities to enhance your labeling processes:

  • Versatility: Suitable for labeling a variety of product shapes and sizes, including round objects, flat surfaces, and irregular contours.

  • Accuracy: Equipped with advanced sensors and control systems to ensure precise label placement and consistent application.

  • Speed: Capable of high-speed labeling, increasing productivity and efficiency in fast-paced environments.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents