Enclume LR11 HS is a sturdy and stylish hearth rack designed to optimize your log storage and enhance your fireplace experience.
Capabilities:
- Spacious Log Storage: With its generous dimensions, the LR11 HS can accommodate a substantial supply of firewood, ensuring you have ample fuel for cozy evenings by the fireside.
- Convenient Kindling Holders: Integrated kindling holders conveniently store tinder and small logs within easy reach, facilitating quick and effortless fire-starting.
- Stable Construction: The rack's durable design, featuring sturdy legs and secure connections, provides stability and prevents logs from toppling over or scattering.
Enclume LR11 HS is a sturdy and stylish hearth rack designed to optimize your log storage and enhance your fireplace experience.
Capabilities:
- Spacious Log Storage: With its generous dimensions, the LR11 HS can accommodate a substantial supply of firewood, ensuring you have ample fuel for cozy evenings by the fireside.
- Convenient Kindling Holders: Integrated kindling holders conveniently store tinder and small logs within easy reach, facilitating quick and effortless fire-starting.
- Stable Construction: The rack's durable design, featuring sturdy legs and secure connections, provides stability and prevents logs from toppling over or scattering.
LR11-COUNTRY HOME LOG RACK
w/Kindling Holders
Enclosed you will find everything needed for the assembly
and use of your hearth rack. Two people make assembly
and installation easier. The parts and hardware included are:
Hardware included:
4 – Hard Glides
4 – 3/8’ x 5/8” Button head Screws
2 – 3/8” x ½” Button head Screws
1 – 7/32” Hex Key
Components included:
2 – Uprights
2 – Kindling Holders
2 – Legs
ASSEMBLY AND INSTALLATION INSTRUCTIONS
Rack Assembly
1) Push Hard Glides onto the ends of each leg.
2) Place each leg approximately 12” apart and parallel to each other.
3) Set uprights perpendicularly on top of the legs, lining up holes attach with the four 5/8” button head screws, tighten only finger
tight.
4) Place each kindling holder on the inside of each upright and attach with the two remaining button head screws, going from the
inside of the kindling holder thru the outside of the uprights. Again, leave screws finger tight.
5) Square up your rack and tighten all button head screws using the Allen wrench included in the hardware.
It is important that your rack is assembled correctly. If the unit is assembled or used incorrectly, it
could become unstable and collapse, possibly causing injury.
WARNING
Limited Warranty: This product is warranted to be free of material defects for a period of five years from the date of purchase. Customer's exclusive remedy shall
be the repair or replacement of the defective product and shall be subject to the following conditions: (1) notice of any defect is received by Enclume within the
warranty period and (2) customer returns the defective product to Enclume Design Products, 24 Colwell St., Port Hadlock, WA 98339, postage prepaid within 20
days following a return authorization number (which may be obtained by telephoning the number at the top of this instructions) being provided to the customer by
Enclume. There are no other warranties, expressed or implied. THERE ARE NO WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE. ENCLUME SPECIFICALLY DISCLAIMS ANY AND ALL INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
OUT OF THE PURCHASE OR USE OF ENCLUME'S PRODUCTS.
Thank you for choosing Enclume!
Enclume
racks are the ultimate quality,
design, strength and function.
WARNING: READ ALL OF THE
INSTRUCTIONS BEFORE
ASSEMBLING AND USING YOUR
RACK
If you need help, please call 1-877-ENCLUME
Enclume Design Products
24 Colwell Street, Port Hadlock, WA 98339
Phone 360-385-6100 Fax 360-385-6156
www.enclume.com
-
1
Enclume LR11 HS is a sturdy and stylish hearth rack designed to optimize your log storage and enhance your fireplace experience.
Capabilities:
- Spacious Log Storage: With its generous dimensions, the LR11 HS can accommodate a substantial supply of firewood, ensuring you have ample fuel for cozy evenings by the fireside.
- Convenient Kindling Holders: Integrated kindling holders conveniently store tinder and small logs within easy reach, facilitating quick and effortless fire-starting.
- Stable Construction: The rack's durable design, featuring sturdy legs and secure connections, provides stability and prevents logs from toppling over or scattering.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Enclume WSR7 HS Installation guide
-
-
-
-
-
-
-
-
-
