2. SKYDANCE
  3. V1-N
V1-N

SKYDANCE V1-N User manual

  • Hello! I've reviewed the user manual for the V1-N LED Controller and I'm ready to help you with any questions about it. This document details the features of this single-channel mini RF controller, including push-dim functionality, remote control pairing, and its ability to synchronize with other controllers. Ask me anything about its operation or installation specifics.
  • What is the maximum output power of the controller?
    How many remote controls can one controller accept?
    What is the control distance for auto-transmitting?
    How do I match a remote control?
    How do I delete matched remotes?
Technical Parameters
1
User Manual Ver 2.0.0
Features
Input and Output
Operation temperature
Environment
Ta: -30
O
C ~ +55
O
C
Case temperature (Max.)
Ta: +85
O
C
Safety and EMC
EMC standard (EMC) ETSI EN 301 489-1 V2.2.3
ETSI EN 301 489-17 V3.2.4
Radio Equipment(RED) ETSI EN 300 328 V2.2.2
Certication CE,EMC,LVD,RED
EN 62368-1:2020+A11:2020
Safety standard(LVD)
5 years
Warranty
Dimming data
Output voltage
Output power
Input voltage
Dimension
Output type Constant voltage
Max. 75W
12-24VDC
12-24VDC
Dimming range
Input signal
Control distance
Dimming gray scale
PWM Frequency
Dimming curve
Gross weight
Size
Package
0.013kg
RF 2.4GHz
30m(Barrier-free space)
4096 (2^12) levels
0 -100%
500Hz (default)
Logarithmic
L90x H130mm
Model No.: V1-N
RF + Push Single Color LED Mini Controller
1 channel constant voltage/Push-Dim/Max 75W/Step-less dimming/Wireless remote control
+
V1-N L E D Pu sh Dimm er
Uin:12- 24VDC Iout: Max.3A
V+
V-
Push
Click: O N/OFF
Double cli ck: 10 0% or 1 0%
Long press: D imming up /do wn
Output
LVD RED
● 1 channel constant voltage single color LED mini RF controller.
● 3A per channel, output connect with 5 meters LED strip, max output power 75W.single color
● Connect with push switch to achieve on/off and 0-100% dimming function.
● Match with RF 2.4G single zone or multiple zone dimming remote control optionally.
● One RF controller accept up to 10 remote control.
● 4096 levels 0-100% dimming smoothly without any ash.
● Auto-transmitting function: Controller automatically transmit signal to another controller
with 30m control distance.
● Synchronize on multiple number of controllers.
60.00 mm
14.00 mm
+
V1-N
V+
V-
Push
Output
Dimming remote
+
-
Power Supply
12-24VDC
Constant Voltage
AC100-240V
Push Switch
+
V+
V-
Push
Output
Wiring Diagram
5m single color LED strip
Push Dim function:
ON/OFF
Turn on at 100% or 10% (night light) and vice-versa
Dimming UP/DOWN
Dimming UP/DOWN
Click
Double Click
Long press(>1s) from OFF
Long press(>1s) from ON
V1-N
Match:
Switch off the power, then switch on power.
Immediately short press on/off key (single zone remote) or zone key (multiple zone remote) 3 times on the remote.
The light blinks 3 times means match is successful.
Delete:
Switch off the power, then switch on power.
Immediately short press on/off key (single zone remote) or zone key (multiple zone remote) 5 times on the remote.
The light blinks 5 times means all matched remotes were deleted.
Match Remote Control
Another way to match:
The receiver is power on for five consecutive times, the LED strip light start blinking slowly for 10s,
Immediately short press on/off key (single zone remote) or zone key (multiple zone remote) on the remote.
The light blinks 3 times means match is successful.
Dimming Curve
100
90
80
70
60
50
40
30
20
10
PWM duty(%)
50 60 70 80 90 100
Brightness(%)
10 20 30 40
Gamma=1.6
Malfunctions analysis & troubleshooting
Malfunctions
Causes
No response
from the remote
1. The battery has no power.
2. Beyond controllable distance.
3. The controller did not match the remote.
No light
Troubleshooting
1. Replace battery.
2. Reduce remote distance.
3. Re-match the remote.
1. Check the power.
2. Check the connection.
1. No power.
2. Wrong connection or insecure.
1. The products shall not be stacked, the distance should be ≥ 20cm, so as not to affect lifespan of the products due to poor heat dissipation.
2. The product shall not be installed close to the switching power supply with an interval of ≥ 20cm to avoid the radiation interference of the switching
power supply.
3. The installation height shall be ≥ 1m from the oor to avoid shortening the remote control distance due to too weak reception signal.
4. The products are not allowed to be close to or covered by metal objects, with an interval of ≥ 20cm to avoid signal attenuation and shorten the remote
control distance.
5. Avoid installation at the corner of the wall or the corner of the beam, with an interval of ≥ 20cm to avoid signal interference.
InstallationPrecautions
2
User Manual Ver 2.0.0
/