2. LEDLyskilder
  3. V4-W
V4-W

LEDLyskilder V4-W User manual

  • Hello! I have analyzed the user manual for the V4-W, V4-W(CJ) and V4-W(DJ) LED controllers. This document describes the features of these 4-channel constant voltage RGBW controllers, including their RF remote control compatibility, dimming capabilities, and synchronization features. I'm ready to answer any questions you might have about these devices and their usage.
  • What is the maximum output power of the controller?
    How many remote controls can be paired with one controller?
    What is the control distance of the controller?
    How to match the remote control?
User Manual Ver 1.0.6
Model No.: V4-W
4 channel constant voltage/Max 75W/Step-less dimming/Wireless remote control
Features
Page 1
RGBW LED Mini RF Controller
● 4 channel constant voltage RGBW LED mini RF controller.
● 1A per channel, output connect with 5 meters RGBW LED strip, max output power 75W.
● Match with RF 2.4G single zone or multiple zone RGB/RGBW remote control.
● One RF controller accept up to 10 remote control.
● 4096 levels 0-100% dimming smoothly without any flash.
● Built in 10 dynamic mode, include jump or gradual change style.
● Auto-transmitting function: Controller automatically transmit signal to another controller with 30m control distance.
● Synchronize on multiple number of controllers.
LVD RED
Technical Parameters
Operation temperature
Case temperature (Max.)
Environment
IP20
IP rating
Dimming data
Dimming range
RF 2.4GHz
30m(Barrier-free space)
4096 (2^12) levels
0 -100%
Input and Output
Warranty and Protection
5 years
Protection Reverse Polarity
Warranty
Input signal
Control distance
Dimming gray scale
Ta: -30
O
C ~ +55
O
C
T c: +85
O
C
Output type Constant voltage
Output power Max. 75W
Output voltage 12-24VDC
Input voltage 12-24VDC
500Hz (default)
PWM Frequency
Dimming curve Logarithmic
Wiring Diagram
14.00 mm
60.00 mm
Dimension
V4-W RGBW LED Mini RF Controller
Power Connector
Model Photo
V4-W(CJ)
V4-W
LED Connector
V4-W(DJ)
Red/Black Cable
10cm
5.5mm DC
Female Jack
5-pin Flat
Female Jack
Red/Black Cable
10cm
5-color Flat Cable
10cm
5-pin Flat
Female Jack
+
R
G
B
V4- W RGB W LED R F Con troll er
Uin :12-2 4VDC
Iou t: 1A/C H, Total M ax.4A
W
V+
V-
Inp ut
+
R
G
B
V4- W RGB W LED R F Con troll er
Uin :12-2 4VDC
Iou t: 1A/C H, Total M ax.4A
W
V+
V-
Inp ut
+
R
G
B
V4- W RGB W LED R F Con troll er
Uin :12-2 4VDC
Iou t: 1A/C H, Total M ax.4A
W
V+
V-
Inp ut
Match Remote Control
Match:
Switch off the power of the receiver, then switch on power, repeat again.
Immediately short press on/off key (single zone remote) or zone key (multiple zone remote) 3 times on the remote.
The light blinks 3 times means match is successful.
.
Delete:
Switch off the power of the receiver, then switch on power, repeat again.
Immediately short press on/off key (single zone remote) or zone key (multiple zone remote) 5 times on the remote.
The light blinks 5 times means all matched remotes were deleted.
Power Supply
12-24VDC
Constant Voltage
AC100-240V
RGBW remote
5m RGBW LED strip
+
R
G
B
W
+
R
G
B
V4- W RGB W LED R F Con trol ler
Uin :12-2 4VD C
Iou t: 1A/C H, Total M ax.4A
W
V+
V-
Input
Weight
0.008kg
Gross weight
Net weight
0.038kg
Model List
+
R
G
B
V4-W RG BW LED R F Controller
Uin:12-24 VDC
Iout: 1 A/CH, Total M ax.4A
W
V+
V-
Input
+
R
G
B
V4-W R GBW L ED RF Co ntrol ler
Uin:12 -24VDC
Iout: 1 A/CH , Total Max. 4A
W
V+
V-
Input
+
R
G
B
V4-W R GBW L ED R F Contr oller
Uin:1 2-24 VDC
Iout: 1 A/CH, Tota l Max.4 A
W
V+
V-
Input
V4-W V4-W(CJ) V4-W(DJ)
Cable In /Cable Out Version Cable In /4P Female Jack Out Version DC Female Jack In /4P Female Jack Out Version
Safety and EMC
EMC standard (EMC) ETSI EN 301 489-1 V2.2.3
ETSI EN 301 489-17 V3.2.4
Radio Equipment(RED) ETSI EN 300 328 V2.2.2
Certification CE,EMC,LVD,RED
EN 62368-1:2020+A11:2020
Safety standard(LVD)
+
R
G
B
V4-W RG BW L ED RF Controller
Uin:12-24 V DC
Iout: 1A/ CH, Total Max.4A
W
V+
V-
Input
User Manual Ver 1.0.6 Page 2
Application notes
1. All the receivers in the same zone.
2. Each receiver(one or more) in a different zone, like zone 1, 2, 3 or 4.
Zone 1 Zone 2 Zone 3
RF remote
30m 30m
Zone 4
RF remote
Auto-transmitting: One receiver can transmit the signals from the remote to another receiver within 30m,
as long as there is a receiver within 30m, the remote control distance can be limitless.
Auto-synchronization: Multiple receivers within 30m distance can work synchronously when they are controlled
by the same remote, under same dynamic mode and with same speed.
Receiver placement may offer up to 30m communication distance. Metals and other metal materials will reduce the range.
Strong signal sources such as WiFi routers and microwave ovens will affect the range.
We recommend for indoor applications that receiver placements should be no further apart than15m.
30m
30m30m
+
R
G
B
V4-W RG BW L ED RF Controller
Uin:12-24 V DC
Iout: 1A/ CH, Total Max.4A
W
V+
V-
Input
+
R
G
B
V4-W RG BW L ED RF Controller
Uin:12-24 V DC
Iout: 1A/ CH, Total Max.4A
W
V+
V-
Input
+
R
G
B
V4-W RG BW L ED RF Controller
Uin:12-24 V DC
Iout: 1A/ CH, Total Max.4A
W
V+
V-
Input
+
R
G
B
V4-W RG BW L ED RF Controller
Uin:12-24 V DC
Iout: 1A/ CH, Total Max.4A
W
V+
V-
Input
+
R
G
B
V4-W RG BW L ED RF Controller
Uin:12-24 V DC
Iout: 1A/ CH, Total Max.4A
W
V+
V-
Input
+
R
G
B
V4-W RG BW L ED RF Controller
Uin:12-24 V DC
Iout: 1A/ CH, Total Max.4A
W
V+
V-
Input
Malfunctions analysis & troubleshooting
Wrong color 1. Wrong connection of R/G/B/W wires.
Malfunctions
Causes
No response
from the remote
1. The battery has no power.
2. Beyond controllable distance.
3. The controller did not match the remote.
1. No power.
2. Wrong connection or insecure.
No light
1. Reconnect R/G/B/W wires.
Troubleshooting
1. Replace battery.
2. Reduce remote distance.
3. Re-match the remote.
1. Check the power.
2. Check the connection.
Dimming Curve
100
90
80
70
60
50
40
30
20
10
PWM duty(%)
50 60 70 80 90 100
Brightness(%)
10 20 30 40
Gamma=1.6
RGBW dynamic mode list
No. Name No.
RGB jump
RGB smooth
6 color jump
6 color smooth
Yellow cyan purple smooth
1
2
3
4
5
6
7
8
9
10
Name
RGB fade in and out
Red fade in and out
Green fade in and out
Blue fade in and out
White fade in and out
V4-W RGBW LED Mini RF Controller
/