2. Bradley Corporation
  3. 5831-000000

Bradley Corporation 5831-000000 Installation guide

  • I've reviewed the datasheet for the Bradley Seat Cover Dispenser 5831. This document provides specifications, installation information and a drawing of this surface-mounted, 250-capacity dispenser made of stainless steel. I am ready to answer your specific questions about the device.
  • What material is the dispenser made of?
    What is the capacity of the dispenser?
    How are seat covers inserted?
    What are the overall dimensions of the dispenser?
5831
Seat Cover Dispenser
© 2014 Bradley
P.O. Box 309, Menomonee Falls, WI 53052-0309
800 BRADLEY (800 272 3539) +1 262 251 6000
bradleycorp.com
Orders composed of products indicated as Bradex®
will be available to ship in three days after receipt of
order at the factory. There is no pricing penalty for
this service from Bradley.
Page 1 of 1 2/19/2014
This information is subject to change without notice.
Bradley_SeatCoverDispenser_5831
11"
(279mm)
15¾"
(400mm)
2" (51mm)
3½"
(89mm)
Ty p.
Ø ³⁄₁₆" (5mm) holes
for mounting (two places)
4½"
(114mm)
ADA Compliant
Consult local and national accessibility codes for proper
installation guidelines.
Conformity and compliance to local and national codes is
the responsibility of the installer.
Model 5831 — Surface-Mounted
Bradex®
250 Capacity
Product Materials
UNIT: 22 gauge stainless steel with exposed surfaces in
architectural satin finish. Welded construction with burr-free edges.
Capacity
250 standard single-fold or half-fold toilet seat covers.
Operation
Insert seat covers through bottom of unit.
Guide Specification
Surface-mounted toilet seat cover dispenser shall be fabricated
of 22 gauge stainless steel with exposed surfaces in satin finish.
Capacity 250 toilet seat covers.
Overall dimensions: 15¾"W x 11"H x 2"D.
Dim. "A" to
finished floor
/