Bradley 270 User manual

Brand: Bradley

Model: 270

Type: User manual

Bradley 270 is a multi-purpose unit that combines a towel dispenser, hand dryer, and waste receptacle. It is constructed from durable stainless steel and features a contemporary design with a satin finish. The towel dispenser can hold up to 710 single-fold, 500 multi-fold, or 370 C-fold paper towels. The hand dryer is sensor-activated and has a universal voltage, making it suitable for use in a variety of locations. The waste receptacle has a capacity of 4.37 gallons and is removable for easy servicing.

270

Multi-Purpose Unit - Towel Dispenser/Hand Dryer/Waste Receptacle

P.O. Box 309, Menomonee Falls, WI 53052-0309

800 BRADLEY (800 272 3539) +1 262 251 6000

bradleycorp.com

Page 1 of 2 12/11/2017

This information is subject to change without notice.

Bradley_CombiDispenser_270_10_11

Feature Sufﬁx

 For Export (CE Certiﬁed)

-49

Optional Features

12-3/4" (324 mm)

14-7/8" (378 mm)

Paper Towel

Dispenser

56"

(1422 mm)

Finished Wall

5-1/2" (140 mm)

2-5/8" Ty p. (67 mm)

(227 mm)

54"

(1372 mm)

3/4"

(19 mm)

Mounting

Holes

(4) Per

Shelf

Hand

Dryer

Removable

Waste

Container

9-1/8"

(232 mm)

Electrical

Knockout

32-1/4"

(819 mm)

Electrical

Knockout

Model 270 — Recessed

(recesses 5-1/2"; projects 3/4")

Model 270-10 — Semi-Recessed

(recesses 3-1/2"; projects 2-3/4")

Model 270-11 — Surface-Mounted

(projects 6-1/4")

Contemporary Series — Satin Finish

C-Fold/Multi-Fold/Single-Fold Towels

Product Materials

CABINET: 22 gauge stainless steel with exposed surfaces in architectural satin

finish. Welded construction with seamless cor ners and burr-free edges.

DOOR: 18 gauge stainless steel. Warp resistant, with full length piano hinge and

(2) tumbler locks keyed like other Bradley units.

TOWEL DISPENSER: 22 gauge stainless steel. Rolled edge on dispenser

opening.

HAND DRYER: sensor activation. Universal voltage. European Export available.

To comply with EU standards, purchase model with option -49 (required for CE

certification only).

WASTE CONTAINER LINER: natural color linear low density polyethylene —

Part #M44-081.

Capacity

Towel Dispenser — 710 single-fold, 500 multi-fold or 370 C-fold paper towels.

Waste Container — 4.37 gal. (16.5 L)

Operation

Towel dispenser holds single-fold, multi-fold or C-fold towels without use of

special adap ter. Receptacle removable for easy servicing by unlocking door.

Installation

Verify all rough-in dimensions prior to installation. Recessed unit requires rough

wall opening 13"W x 54¼"H x 5½"D. Secure to framing with mounting screws

(included) at holes provided. Shim at screw points as required. Surface-mounted

units need to have holes drilled by installer. Mounting screws are included.

Please refer to the installation instructions with the hand dryer for directions.

Guide Specification

Recessed combination towel dispenser, hand dryer, and waste receptacle shall be

fabricated of 18 gauge stainless steel with exposed surfaces in satin finish. Warp-

free door equipped with piano hinge and secured by (2) tumbler locks. Towel

dispenser capacity — 710 single-fold, 500 multi-fold, or 370 C-fold towels. 4.37

gal. linear low density polyethylene waste re cep tacle included.

Overall dimensions: 14

⁄8"W x 56"H x 6¼"D.

270

Multi-Purpose Unit - Towel Dispenser/Hand Dryer/Waste Receptacle

P.O. Box 309, Menomonee Falls, WI 53052-0309

800 BRADLEY (800 272 3539) +1 262 251 6000

bradleycorp.com

Page 2 of 2 12/11/2017

This information is subject to change without notice.

Bradley_CombiDispenser_270_10_11

Sensor Activation

Universal Voltage

Not recommended for high traffic, high vandal-prone applications

Product Materials

Cover: powder-coated aluminum alloy, white.

Motor: 7500 RPM brush type.

Heating Element: industrial strength coil would on mica support protected by

temperature limit control.

Electronic Control: active infrared sensor.

Circuitry: infrared red microprocessor control allows for multi-voltage application.

(229mm)

9¾"

(248mm)

(102mm)

Side View

Front View

(178mm)

/8" (22mm)

electrical

knockout

/8"

(105mm)

2¼"

(57mm)

¾"

(19mm)

(162mm)

Mtg. Hole Locations

(Front View)

Operation

Place hands 3" - 6" below nozzle to activate dryer.

Installation

Verify all rough-in dimensions prior to installation. Refer to mounting hole locations

shown on the left. Mark the location of the four mounting bolt holes. When two or

more dryers are installed, they should be placed no closer than 24" (60 cm) from

center to center. Use the security hex driver to loosen the cover screws. Remove

the cover from the dryer. Attach the mechanism firmly to the wall using appropriate

fasteners. Run the supply wiring to the dryer and connect it to the terminal block.

The ground wire must be connected to the base plate. Replace the cover. Do not

overtighten the screws. There may be a delay when power is first applied.

Guide Specification

Surface-mounted hand dryer shall protrude 4" (102mm), fabricated from powder

coated cast aluminum. Contain Universal voltage capability. Dryer shall be activated

by means of an infrared emitting/receiving electronic control device, automatically

detecting hands when present. Dryer operates at 76 dB while delivering 134 CFM

during user-controlled drying cycle.

Overall dimensions: 9"W x 9¾"H x 4"D (including nozzle tip).

ADA Compliant

Consult local and national accessibility codes for proper

installation guidelines.

Conformity and compliance to local and national codes is the

responsibility of the installer.

Volts Amps Watts Frequency

115 10 1150 50 or 60 Hz

208 6 1150 50 or 60 Hz

240 5 1150 50 or 60 Hz

Bradley 270 User manual

Bradley 270 User manual

Related papers

Other documents