Ozone OZFDL02 User manual

Brand: Ozone

Model: OZFDL02

Type: User manual

SMART LOCK USER MANUAL

Special Attention:

It is recommended to keep the mechanical keys at a safe place in case of emergency.

Please replace the batteries if you are getting low battery alert/notification.

Please read this manual carefully before installing the product and keep it with you for future

reference.

1 .

Model: OZ-FDL-02 Std Black/SC

1. Lock Structure

2. Mortise

Dead Bolt SS304 : 15(L) x 8(W) x 35(H)mm

Tested ² 500000 cycles

70mm

270mm

Battery Cover

Back Panel

26mm

Front Panel

Keyhole

90mm

Adjustable range from

56mm to 110mm

110mm

56mm

70mm

20mm

Fingerprint

Scanner

Keypad

RFID Card Scanner

50mm

Emergency

Power Supply

148mm

LCD Display

22mm

240mm

60mm

174mm

85mm

75mm

15mm

Latch

Dead Bolt

3. Installation

3.1 Turn the handle

Notice: Adjust the handle according to door opening direction.

Front panel:

1. Loose four screws.

2. Change the handle direction according to door opening direction.

3. Reinstall the screws after adjusting the handle direction.

1. Loose four screws 2. Left open the handle

towards the left, right open

the handle towards the right

3. Reinstall the screw after

adjusting the direction

Back panel:

1. Loose four screws.

2. Change the handle direction according to door opening direction.

3. Reinstall the screws after adjusting the handle direction

1. Loose four screws 2. Left open the handle

towards the left, right open

the handle towards the right

3. Reinstall the screw after

adjusting the direction

3.2 Installation Diagram

Step 1 : Install Lock body Step 2 : Install sliding screw

casing and fixed front panel

Step 3 : Connect front and

back panels wires Step 4 : Install back panel

Step 5 : Install AAA batteries

The screw casing

place is adjustable

from 55mm to

100mm from the

square shaft

depending on the

location of the

holes.

Keep arrow direction upward as shown.

4. Specifications

Front Panel Size

Back Panel Size

Weight

Access Modes

Color Options

Compatible Door Type

Working Voltage

Door Thickness

Storage Capacity

Working Temperature

Working Humidity

Low Voltage Alarm

270*70*20mm

Silver

Black

3KG

Fingerprint

Password

Card

Mechanical key

Aluminum door

Wooden door

Metal door

6V/8x (AAA Batteries)

35-60mm

1000 RFID card + Password

200 Fingerprints

-25℃-60℃

20%-90%

Less than 4.5V

5. Features:-

E Semiconductor fingerprint sensor(508dpi)

E Passage mode function

E Universal handle

E LCD screen display Date & Time, User ID access & User unlock records

E Voice guided operation

E Dual combination mode

E Auto secure & break-in alarm

E Volume setting function

E Auto locking time setting function

E Anti-theft Password

E Smart freeze

E Emergency power supply through USB

Material of Lock Body

Material of Lock

SS 304

Zinc Alloy

Note : The lock can be opened using default code 123456 followed by # in trial mode

6. Operating instructions

Key

Function of the key

6.1 Key Manual

DOWN

LEFT

6RIGHT

EXIT; Long press for 3s to enter the menu

ENTER

6.2 Setting

Device Reset

Method 1: Open lock back panel

cover plate >>> press the reset

buttons for 5 seconds. A prompt will

be place once it's reset successfully.

Method 2:

Press”*” key for 3s

to enter into the

menu and provide

admin password or

fingerprint

Select 'system set'

and press”#”

confirm

'Succeed' message

will appear on

successful reset.

Choose “yes” and

press”#” confirm

Choose 7 for

initialization and

press”#” confirm

Reset Button

User Management

Enter the menu: Long press the “*” key for 3 seconds to enter the menu.

(if the administrator has been set up, please first verify the administrator through the administrator’s

fingerprint password or card.

Note1: You can register fingerprint,

password or card by clicking the

“Ÿ(2)” or “”(8)” key žpress “#”, follow

the prompts to register the same.

2. Add Password

3. Add Card

Please first verify the administrator, then

can add user operation as Note1.

You can choose which user you want to delete by

clicking the “Ÿ(2)” or “”(8)” key ž press “#” ž choose

“Yes”

You can choose which user you want to modify by

clicking the “Ÿ(2)” or “”(8)” key ž press “#” ž choose

“Yes”

Main Menu

1. Add Menu

2. Add user

3. Del User

4. Modify User

5. System User

6. View Info

Set Date & Time

1. Set Time

2. Volume

3. Passage Mode

4. Locking Time

5. Double Verify

6. Language

7. Initialization

1. Record

2. Memory Used

3. F-Version V4.0

You can increase or decrease the

volume by clicking the “Ÿ(2)” or “”(8)”

key ž press “#”

You can click “Ÿ(2)” or “”(8)”

key ž press “#” to turn on or turn off the

passage mode.

You can increase or decrease the lock delay

time by clicking “Ÿ(2)” or “”(8)” key ž

press “#”

Click “Ÿ(2)” or “”(8)”

key ž press “#” to turn on or turn off the

double verify function.

1. Choose Language

1. To view lock records.

2. To view memory used.

3. To view firmware version.

Click “Yes” ž Press “#” ž to complete

the initialization process

1. Add Finger

2. Add Password

3. Add Card

1. Add Finger

Packing List

Picture

Name

Quantity

Front Panel

Strike Plate

Back Panel

Strike Box

User Manual

Mechanical Key

Mortise (Lock Body)

Card

Picture

Name Fixing screws 1

(For Battery Cover)

Opposite

Pull Screw Sliding Screw Sliding

Screw Casing

Quantity 1 3*1 2 2

Picture

Name Pointed Screw

(For Wooden Door)

Fixing Screws 2

(For Aluminum Door)

Waterproof

Rubber Plate

Quantity 4 4 2

Cutout Template

For more details, please visit www.ozonesecutech.com

Ozone Secutech PVT. LTD.

Operations Office : Plot No. 548, Phase, V, Udyog Vihar, Gurugram, Haryana - 122016, India

Head Office : H-40, Bali Nagar, New Delhi - 110015, India

Customer Care No. : +91-11-45576666

Email : customercare@ozonesecutech.com I Website : www.ozonesecutech.com

Ozone OZFDL02 User manual

Ozone OZFDL02 User manual

Related papers

Other documents