SMK-Link VP3600 Projector Ergo Stand User manual

Brand: SMK-Link

Model: VP3600 Projector Ergo Stand

Category: Projector accessories

Type: User manual

Page 1

User’s Manual

Projector Ergo Stand

Page 2

Package Contents

Projector stand

Large plate (preinstalled on the stand)

User’s manual

Set-up and operating the stand

Remove the projector stand from the packaging box

The large platform converter is already snapped on

to the stand.

If a compact size projector (footprint

smaller than 9.6 x 7.4-inch) is used and a

smaller platform is preferred, lift up the top

plate to reveal the built-in small platform

underneath.

•

Large Plate

Small Plate

Platform Converter

Page 3

If a larger projector (footprint larger than

9.6 x 7.4-inch) is used or a larger platform is

desired, snap the large platform converter on

to the top of the projector stand to convert it

to a larger platform.

Place the projector on top of the stand. Make sure

the feet of the projector are placed rmly on the top

plate.

Adjust the projector stand top plate to ensure best

projected image result.

Use both hands, grab on the 2 opposite

edges of the projector stand top plate with

the projector on top.

Rotate the top plate to nd the correct angle

of the projected image.

Tilt the top plate to adjust the height of the

projected image.

Always carry the projector stand by holding on to

the bottom of the stand. Do not grab the top plate

as the projector stand may separate from the large

platform adapter and fall off.

•

Page 4

Product Specications

Supports projectors up to 10-lb and 11.0 x 8.8”

footprint

Dimensions:

Complete unit: 11.0 x 8.8 x 3.5-inch (280 x

224 x 90 mm)

Large platform converter: 11.0 x 8.8 x 0.2-

inch (280 x 224 x 6 mm)

Small built-in platform: 9.6 x 7.4 x 0.2-

inch (245 x 189 x 6 mm)

Weight: 2.4 lb (1.1 kg)

Storage Temperature: 5ºF ~ 140ºF (-15º ~ 60º)

Storage Humidity: 90% RH or less

•

Page 5

Warranty

SMK-LINK ELECTRONICS CORPORATION (SMK-

LINK) warrants to the original end-user purchaser of

the Product (“you”) that the Product, will be free from

defects in materials or workmanship under normal use

and service for one-year from date of purchase. Dated

invoice or sales receipt is necessary to accompany the

Product returned for warranty service consideration.

Any Product repaired or replaced under the terms of the

warranty is covered for the remainder of the original

warranty period or ninety (90) days from the date of

service or return shipping, whichever is longer. If the

Product becomes defective in materials or workmanship

during the warranty period, SMK-LINK will, at its option,

either repair or replace it with a more current or upgraded

model if the originally purchased model is not available.

This warranty does not cover products which have been

subjected to misuse, accident, physical damage, improper

installation, abnormal operation or handling, neglect,

inundation or re, or when product regulatory label has

been removed, altered or rendered illegible; nor does it

cover accessory and consumable items. In no case shall

SMK-LINK be liable for any indirect special, incidental,

or consequential damages based upon breach of warranty,

breach of contract, negligence, strict tort or any other legal

theory. Such damages include, but are not limited to, loss

of prots, loss of savings or revenues, inability to use the

product or any associated equipment, cost of capital, cost

of any substitute equipment, facilities or services, claims

by third parties other than you, and injury to property.

SMK-LINK’s total liability for damages for any cause

related to, or arising out of, the use or inability to use the

Page 6

product, shall not exceed the original price paid for the

product even if SMK-LINK has been informed of such

possibility. If your Product requires warranty service, you

must rst contact SMK-LINK Product Support to receive

an RMA Number. The contact information can be found

on SMK-LINK website:

http://www.smklink.com/support/contactsupport.html.

This warranty does not affect your statutory right and you may

also have other rights which vary from state to state. Unless

modied in writing, signed by both you and SMK-LINK,

this warranty is understood to be the complete and exclusive

agreement between the parties, superseding all prior agreements,

oral or written, and all other communica¬tions between the

parties relating to the subject matter of this warranty.

Product Support

For technical support please contact SMK-Link Electronics

Corporation at http://www.smklink.com/support

All trademarks and registered trademarks mentioned in this

document are the property of their respective owners.

Features and specications are subject to change without notice.

Electronics and the six dot logo are trademarks of Interlink

Electronics, Inc. and are used under license by SMK-Link.

SMK-Link VP3600 Projector Ergo Stand User manual

Brand: SMK-Link

Model: VP3600 Projector Ergo Stand

Category: Projector accessories

Type: User manual

Download PDF

report

SMK-Link VP3600 Projector Ergo Stand User manual

SMK-Link VP3600 Projector Ergo Stand User manual

Related papers

Other documents