22
Interior LED light
Theinteriorlightswitchesoffauto-
maticallyafterthedoorhasbeen
openedforapprox.15minutes.
Iftheinteriorlightdoesnotswitch
onwhenthedoorisopenedbriefly,
but the temperature display is
working,thelightmaybedefective.
The light intensity of the LED
light corresponds to laser
class 1/1M.
Important
The light cover may only be removed by customer service
staff. If the cover is removed, do not look directly at the
light through optical lenses from close distance. This can
damage your eyes.
Additional functions
Inset-upmodeyoucansetthechild-prooflockandadjustthe
brightnessofthedisplay.
Activating set-up mode:
• Pressthe
button4forapprox.5seconds.
- The
buttonflashes.
- Thedisplayshows cforchild-prooflock.
Note:Thevaluetobealteredflashes.
• Selecttherequiredfunctionbypressingthe
/ button:
c=child-prooflock,
h=displaybrightness
•Nowselect/acknowledgethefunctionbypressingthe
button
briefly:
>Forc = child-proof lock,
pressthe
/ buttontoselect
c1=child-prooflockonor
c0=child-prooflockoffandacknowledgewiththe
button.Whenthesymbol islit,thechild-proof
lockisactivated.
>Forh = brightness,
pressthe
/ buttontoselect
h1= minimum to h5=maximumbrightnessand
acknowledgewiththe
button.
Exiting set-up mode:
• Exitthe set-up modebypressingthe On/Offbutton
3;after
2min.theelectronicsystemswitchesoverautomatically.The
normaloperatingmodeisactivatedagain.
Repositioning the door racks
- Liftdoorrackvertically,lift out to
thefrontandre-insertatadifferent
height,followingthesestepsinthe
reverseorder.
Equipment
You can re-arrange the storage
shelvesasrequired.
Lifttheglassshelf,aligntherecess
overthesupportandreplacetheshelf
inahigherorlowerposition.
Thesectioned glass shelves
canbemovedtomakespacefor
tall containers. Place the shelf
railsprovided,fig.1,onthesup-
portsontheleftandrightatthe
desiredheight.
Inserttheglassshelves
1and
2asshowninfig.2.Theglass
shelf
2withtheraisededge
mustgoattheback.
Ifyouneedtomakespacefor
tall containers, simply slide
thefront halfofthesectioned
glass shelf carefully under-
neaththebackhalf,fig. 2.
g. 1 g. 2
Switching the appliance on and off
Youarerecommendedtocleantheappliancebeforeswitchingit
onforthefirsttime(see„Cleaning“).
Switching on: Press the On / Off button so thatthe
temperaturedisplaylightsup/flashes.
Switching off: PresstheOn/Offbuttonforapprox.two
secondssothatthetemperaturedisplaygoesout.
Setting the temperature
To increase the temperature
Pressthe
button.
To reduce the temperature
Pressthe
button.
-Whenpressingoneofthebuttonsforthefirsttime,thedisplay
willstarttoflash.
-Pressingthisbuttonagainenablesyoutochangethetemperature
setting.
-The electronic controls will switch over automatically about
5secondsafterthelasttimeyoupressedthebutton,andthe
actualtemperaturewillbedisplayed.
- Youcanchangethetemperaturesintherefrigeratorbetween
9°Cand2°C.
If
F 0toF 5appearsinthedisplay,theappliancehasafault.
Consultthecustomerservicedepartment.
Button
The buttonswitchestherefrigeratorcompartmentto
maximumcooling.Thisisrecommendedparticularyif
youwishtocoollargequantitiesoffreshfoodasfastas
possible.Therefrigerationtemperaturedropstothelevel
ofthecoldesttemperaturecontrolsetting.
Switching on:Pres s t h e
buttonbrieflysothattheLEDcomeson.