3M Pin Strip Header, 2300 Series Important information

Type
Important information
3
Product Change Notice: 3M 2300 Series
Pin Strip Headers – Dual Row, Right Angle
Dimensions
Issue Number: 518
Date: March 23, 2004
To: 3M Electronic Solutions Division Global Copy List
3M Electronic Solutions Division Authorized Distributors
3M Electronic Solutions Division Customers
Product Change
This notice is to inform you of a dimensional change in the dual row right angle 2300 series pin strip
headers. We have thickened the insulator on the dual row product from .200 inches to .242 inches. This
allows our customers to mate Pak 100 wiremount sockets to this product anywhere on the board. In the past
they could only mate these connectors if the pins protruded past the edge of the board.
This product will become our standard offering effective immediately. Part numbers will stay the same,
with a change of stock number only.
3M Part Number Old Stock Number
New Stock
Number (with
standoff)
2380-5121TB - SE008012517
2380-5221TB - SE008012525
2380-5121TP - SE008012590
2380-5221TP - SE008012608
2380-5121TG SE008001718 SE008013085
2380-5221TG SE008012871 SE008013184
Please notify your customers of this change.
Supporting Materials
TS0766 rev 11
Stock number cross reference chart for full strips.
Samples of many standard configurations should be available in the sample room.
Please direct correspondence on this matter to:
Adam Rumsey
Copper Products Marketing
Phone: 512-984-5851
3M is a trademark of 3M Company.
Important Notice
All statements, technical information, and recommendations
related to 3M’s products are based on information believed
to be reliable, but the accuracy or completeness is not
guaranteed. Before using this product, you must evaluate it
and determine if it is suitable for your intended application.
You assume all risks and liability associated with such use.
Any statements related to the product which are not
contained in 3M’s current publications, or any contrary
statements contained on your purchase order shall have no
force or effect unless expressly agreed upon, in writing, by
an authorized officer of 3M.
Warranty; Limited Remedy; Limited Liability.
This product will be free from defects in material and
manufacture for a period of 90 days from the date of
purchase. 3M MAKES NO OTHER WARRANTIES
INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED
WARRANTY OF MERCHANTABILITY OR FITNESS FOR
A PARTICULAR PURPOSE. If this product is defective
within the warranty period stated above, your exclusive
remedy shall be, at 3M’s option, to replace or repair the 3M
product or refund the purchase price of the 3M product.
Except where prohibited by law, 3M will not be liable for
any loss or damage arising from this 3M product,
whether direct, indirect, special, incidental or
consequential regardless of the legal theory asserted
.
3
Electronic Solutions Division
6801 River Place Blvd.
Austin, TX 78726-9000
www.3M.com/interconnects
© 3M 2004
  • Page 1 1
  • Page 2 2

3M Pin Strip Header, 2300 Series Important information

Type
Important information

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI