Prime-Line R 7321 User manual

Brand
Prime-Line
Model
R 7321
Type
User manual
R 7321
Kenlin Rite-Trak Furniture Guide
The “Drawer Guide”
mounts “into” the end
of the metal track
that is mounted to
the underside of the
drawer. Screws
secure the body of
the guide to the back
of the drawer.
The Drawer track
Case guide or stop is
placed into the steel
drawer track at the
front edge with the
provided screw.
This Stop/Slide
mates within the
drawer Guide Track
under the drawer,
allowing the drawer
slide & the guide to
slide back and forth
on the cabinet track
runner.
To remove the drawer: Firmly grab the drawer on both sides and slide out until it stops. Proceed to pull outward until
the drawer track slips past the “stop”.
After replacing the worn parts, align the drawer with the opening while making sure that the drawer track guide is
mating with the stop and metal track. Press the drawer inward. Continue to press the drawer inward until it moves
past the stop. You should feel the drawer slide smoothly on the track until it reaches the end.
Track is often installed using #8 screws
into the ledger areas for front or back
Cabinet Front
Cabinet Back or Rear Socket
Drawer Back End
#6 x ½” Pan Head
Screw fastens Front
end of Guide Track
onto the bottom of the
drawer
  • Page 1 1

Prime-Line R 7321 User manual

Brand
Prime-Line
Model
R 7321
Type
User manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Other documents