User Manual
V4.0 8651655
Please read and understand all instructions before use. Retain this manual for future reference.
Illuminated Magnifying
Soldering Station
Page is loading ...
V4.0 8651655
Visit www.princessauto.com for more information 3
Illuminated Magnifying
Soldering Station
SPECIFICATIONS
Magnifying glass lens size 90 mm
Magnification
3X
LED illumination 16 pieces LEDs
Neck (for magnifying glass) length 265 mm
Neck (for alligator clips) length 250 mm
Sponge size 30 x 50 mm
Rosin 10 g
Base size 190 x 170 mm
IMPORTANT SAFETY PRECAUTIONS
WARNING! Read and understand all instructions before using this tool. The operator
must follow basic precautions to reduce the risk of personal injury and / or damage to the
equipment. Before allowing someone else to use this tool, make sure they are aware of all
safety information.
WARNING! The warnings, cautions and instructions discussed in this instruction manual
cannot cover all possible conditions and situations that may occur. Common sense and
caution are factors that cannot be built into this product, but must be supplied by the
operator.
NOTE: Keep this manual for the safety warnings, precautions and operating, inspection and
maintenance instructions. When this manual refers to a part number, it refers to the included
parts list.
1. The product can only be used indoors, never outdoors. Do not expose to moisture,
under any circumstances.
2. The product is not a toy and should be kept out of the reach of children.
3. Do not look directly into the light source when the lamp is in operation.
4. Never look into light sources, such as LED lamps or lasers, through the magnifying
glass. This may result in eye injuries, due to the optical interaction.
5. Always cover the magnifying glass with the plastic cover when it’s not in use,
otherwise there is a risk of fire due to the burning glass effect in direct sunshine.
V4.0 8651655
4 For technical questions call 1-800-665-8685
Illuminated Magnifying Soldering Station
6. Never leave the lamp without supervision when it is in use.
7. Check the lamp for damage from time to time. Don’t touch the device if the lamp or
the main adapters show any signs of damage. Please switch off the appropriate main
socket and then carefully pull the main plug from the socket then take it to a qualified
maintenance worker.
FEATURES
1. The multi-purpose tool offers an excellent all around solution, ideal for working on
small PCBs, components, soldering, etc.
2. The magnifying lamp with integrated third hand is intended for illuminating work areas
and it is equipped with a magnifying glass.
3. This device also come with soldering iron stand, alligator clips, soldering wire spool
holder, sponge, rosin, as well as cleaning ball, to help with soldering.
4. It can be powered either by 4 AA batteries (not supplied) or external power adapter
(not supplied).
ASSEMBLY
1. Please note the 2 iron sticks are used to hold the soldering wire spool. Before use,
please unscrew the 2 screws, put the 2 iron sticks in vertical position, then replace the
screws and tighten.
Please unscrew the
2 screws first
The 2 iron sticks are used to hold
the soldering wire spool
2. Open the battery cover on the underside, put 4 pieces 1.5V AA batteries inside (not
included), then replace the cover.
Visit www.princessauto.com for more information 5
8651655 V4.0
Illuminated Magnifying Soldering Station
OPERATION
1. Take the lamp out of the packaging and place it on a level, even surface.
2. Adjust the lamp holder and the light-arm as desired.
3. Insert 4 pieces AA batteries or use the power adapter to get the unit powered on.
4. For use beyond the reach of a wall socket, the device can also be powered by 4 AA
batteries.
5. Switch on the LED magnifying lamp, then start your operation.
MAINTENANCE
1. Remove loose particles with clean compressed air and then brush off remaining
residues with a soft fine brush.
2. Clean the surface with a lens cleaning cloth or a clean, soft and lint-free cloth. To
remove fingerprints and other oily residues, the cloth can be moistened with water or
lens cleaning solution.
3. Do not use acid, alcohol or other solvents or rough, fuzzy cloths. Avoid excessive
cleaning and exerting too much pressure.
4. Never touch the lens with your fingernails or other sharp objects.
5. You can dispose of your used batteries/rechargeable batteries free of charge at your
local collection point.
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
in other languages
Related papers
-
Power Fist 8670689 Owner's manual
-
-
-
-
-
-
-
-
-
