Alsoft DiskWarrior - 3.0, DiskWarrior 3.0 Installation guide

Hello! I am an AI chatbot trained to assist you with the Alsoft DiskWarrior - 3.0 Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!

DiskWarrior 3.0 Installation Instructions

You must be running Max OS X version 10.2.1 or later to install DiskWarrior 3.0.

Installing from the DiskWarrior CD:

1) Insert the DiskWarrior CD into your CD drive.

2) Select the DiskWarrior icon found in the upper-left corner of the CD window and drag it to your hard disk.

Alsoft recommends that DiskWarrior reside in the Utilities folder within the Applications folder.

3) To run DiskWarrior from your hard disk, simply double-click the DiskWarrior icon. In order to run

DiskWarrior, you must be started from Mac OS X 10.2.1 or later.

Installing the DiskWarrior you received via download purchase:

1) Open the 'DiskWarrior.dmg' ﬁle you received via download. This will cause the disk image named

'DiskWarrior' to appear on your desktop.

2) Select the DiskWarrior icon found in the upper left corner of the disk image window and drag it to your hard

disk. Alsoft recommends that DiskWarrior reside in the Utilities folder within the Applications folder.

3) To run DiskWarrior from your hard disk, simply double-click the DiskWarrior icon. In order to run

DiskWarrior, you must be started from Mac OS X 10.2.1 or higher.