Evenflo Fast Fold + Go User manual

®

™

25700995 8/16 CY_171_0100_A0715

®

™

BEWAHREN SIE DIE BEDIENUNGSANLEITUNG FÜR EINE SPÄTERE NUTZUNG AUF.

Lesen Sie die gesamte Bedienungsanleitung vor der Montage und Benutzung des Produktes.

KEEP INSTRUCTIONS FOR FUTURE USE.

Read all instructions BEFORE assembly and use of product.

GUARDE ESTAS INSTRUCCIONES PARA REFERENCIA FUTURA.

Lea las instrucciones ANTES de armar y USAR el producto.

CONSERVER CES INSTRUCTIONS POUR RÉFÉRENCE ULTÉRIEURE.

Lire les instructions AVANT l’assemblage et L’U TI L I SAT I O N du produit.

CONSERVARE LE ISTRUZIONI PER RIFERIMENTO FUTURO.

Leggere attentamente tutte le istruzioni PRIMA dell'assemblaggio e dell'uso del prodotto.

ZACHOWAJ INSTRUKCJĘ NA PRZYSZŁOŚĆ.

Zapoznaj się z instrukcją PRZED złożeniem i przystąpieniem do korzystania z produktu.

ŐRIZZE MEG A HASZNÁLATI ÚTMUTATÓT.

Olvassa el a termék teljes használati útmutatóját a termék összeszerelése és használata ELŐTT!

NÁVOD USCHOVEJTE PRO BUDOUCÍ POUŽITÍ.

PŘED sestavením apoužitím výrobku si přečtěte všechny pokyny.

NÁVOD SI USCHOVAJTE NA BUDÚCE POUŽITIE.

PRED montážou a používaním výrobku si prečítajte celý návod.

GUARDE AS INSTRUÇÕES PARA USO FUTURO.

Leia atentamente as instruções antes de utilizar o produto.

BEWAAR DEZE GEBRUIKSAANWIJZING VOOR TOEKOMSTIG GEBRUIK.

Lees alle instructies VOOR montage en gebruik van het product.

Page is loading ...

10

11

Table of Contents

Tray Top View (1) Seat Pad (1)

Tray Bottom View

Seat Ring (1)

For product support, contact your distributor.

For future reference, record the Model Number and Date of Manufacture below.

Model Number: ______________________________ Date of Manufacture: _________________________

*Not Shown.

Toy kit contents vary by model.

Feet (3)

Toy Kit

Wheels (6)

WARNING

Warnings

• Read all instructions before assembly and use of product. Keep instructions for future use. Adult assembly required.

• Inspect the product before each use. DO NOT use this product if it is damaged, broken, or missing parts.

• NEVER leave child unattended. ALWAYS keep child in view while in product.

• To prevent possible choking hazard, remove and immediately discard packaging material before using this product.

• Do not allow other children to play near the product when it is occupied.

• STRINGS CAN CAUSE STRANGULATION! :

– DO NOT place the ExerSaucer anywhere near cords from window blinds, draperies, phone, etc.

– DO NOT place items with a string around your child’s neck such as hood strings or pacifier cords.

– DO NOT suspend strings over product or attach strings to toys.

• NEVER use near stairs. NEVER use near ranges, radiators, space heaters, fireplaces, or other potential hazards.

• To avoid tip over, place product on flat, level ground or floor.

• For use by children at least four months old who can hold up their head and neck unassisted.

• FALL HAZARD! DO NOT use with children who can walk .

• Stop using this product when your child reaches any of the following developmental stages:

– Is walking;

– Is over 30” (76 cm) tall;

– Can climb out of the product;

– Can stand flat-footed in the unit when adjusted to its highest level.

• DO NOT adjust height while baby is sitting in ExerSaucer.

• DO NOT allow child to sleep in ExerSaucer.

• DO NOT spin baby in seat. Only permit baby to rotate the seat.

• The ExerSaucer should not be left outdoors, exposed to the elements, where temperatures are likely to exceed 100˚F (38˚C).

• NEVER use in or near swimming pools or other bodies of water.

• Take care when placing child in product. Make sure they are fully seated. Allow only the baby’s toes to touch the ground or floor.

• DO NOT allow children to crawl under product.

• Keep children away from product while folding or unfolding.

• DO NOT allow unit to get wet.

• Only use replacement parts supplied by Evenflo on this product.

READ AND FOLLOW ALL WARNINGS AND INSTRUCTIONS!

FAILURE TO DO SO COULD RESULT IN SERIOUS INJURY OR DEATH!

Warnings ..................................................................................................................................................................................................................................11

Assembling the ExerSaucer ...............................................................................................................................................................................................11

Attaching the Toys..................................................................................................................................................................................................................14

Storing the ExerSaucer .........................................................................................................................................................................................................15

Care and Maintenance ..........................................................................................................................................................................................................16

Assembling the ExerSaucer

1. Turn ExerSaucer tray upside down and locate three

(3) legs . Push red release button and rotate leg up

until it locks into the most upright position. Repeat until all

three (3) legs are locked into place. Push leg to make sure

it is locked in position.

A

B

C

Product is for use by children who are at least 4 months old AND can hold up their head and neck

unassisted. Stop using product when your child can walk by himself/herself, is over 30” (76 cm) tall, can

climb out of the product, or can stand flat-footed in the ExerSaucer® in the highest adjustment level.

12

13

M

A

6. Press assembled seat ring down ﬁrmly onto the top of

the tray until it snaps into place and spins freely.

Assembling the ExerSaucer

5. Turn seat ring right side up.

Align triangles on the back of the seat ring with the

triangles on the seat pad label.

Snap the plastic tabs on the pad over the pegs on the

seat ring.

Continue this process until all tabs are attached to

all pegs, then push the seat pad down inside the seat ring.

J

K

L

I

F

Assembling the ExerSaucer

4. Place seat ring upside down and locate the wheel

holders . Snap six (6) seat wheels into wheel

holders, as shown.

F

B

H

G

2. Locate (3) feet on underside of tray .

Remove foot by squeezing tab as shown.

3. Align slots in foot

with tabs on leg . Snap foot onto leg.

Repeat until all three (3) feet are installed on legs. Pull foot to

make sure it is locked onto leg.

D

A

D

E

D

B

To adjust height:

ALWAYS remove baby from ExerSaucer before adjusting.

Push button until the desired position is obtained. Make

sure that all three legs are adjusted to the same position.

To avoid injury, allow the baby’s toes only to touch the floor.

DO NOT allow the baby to stand flat-footed on the floor.

As baby grows and becomes more active, raise the tray to

the next level so that baby enjoys the most comfortable fit

and maximum use of the spin, and bounce features.

WARNING

N

14

15

Attaching the Toys

Press here

Remove

(Toys vary by model.)

2. Turn ExerSaucer upside down. Locate three (3) feet . Remove foot

by squeezing tabs and pulling foot off leg. Repeat until all three (3)

feet are removed.

To install toys, press firmly into tray as shown. Pull up on

stalk toys to make sure they are locked in place.

To remove stalk toys, squeeze tabs

O

and lift stalk toys

from tray.

1. Adjust legs to their lowest position.

3. Push foot

onto tray until it snaps into place. Repeat

until all three (3) feet are locked into place.

4. Locate three (3) legs

. Push release button and rotate leg down until it locks

into the lowest position. Repeat until all three (3) legs are locked into the lowest

position. Pull up on legs to make sure they are locked in place.

B

D

A

D

A

B

C

Storing the ExerSaucer

D

N

To adjust height:

ALWAYS remove baby from ExerSaucer before adjusting. Push

button until the unit is in the lowest position. Make sure that

all three legs are adjusted to the lowest position.

O

16

17

For product support, contact your distributor.

®

™

Care and Maintenance

For Plastic Parts:

Wipe surface clean with cloth slightly moistened with mild soap and water. Allow to air dry.

For Seat Pad

For Best Results

Machine Wash Separately, Cold Water – Delicate Cycle. NO CHLORINE BLEACH. DO NOT dry clean.

Tumble Dry: 10 – 15 Minutes on Low Heat – Remove Immediately.

Page is loading ...

Evenflo Fast Fold + Go User manual

Evenflo Fast Fold + Go User manual

in other languages

Related papers

Other documents