Weston 33-0821 User guide

Category
Mincers
Type
User guide
ATTENTION!
If any components of this unit are broken, do not operate properly, or for product returns,
please contact Weston Products LLC
Phone: 1-800-814-4895 (Outside the U.S. 440-638-3131)
Mail: 20365 Progress Drive, Strongsville, Ohio 44149
Web Site: WestonProducts.com
All Trademarks and Registered Trademarks are property of the respective companies.
SAVE THESE INSTRUCTIONS!
Refer to them often and use them to instruct others.
REV042012
FRUIT & TOMATO
JUICER
ATTACHMENT
MODEL NO. 33-0821
Fits Weston #8
Meat Grinders*
Due to constant factory improve-
ments, the product pictured might
differ slightly from the product
received.
ADDITIONAL ACCESSORIES AVAILABLE
Food-Grade Silicone Spray 03-0101-W
Traditional Style Pasta Machine 01-0201
5-Piece Ravioli Maker Kit 16-0101-W
Food Strainer & Sauce Maker 07-0801
15-1/2” Bamboo Wide Spatula 70-2006-W
Multi-Function Manual Mixer 16-0301-W
#8 Heavy-Duty Electric Meat Grinder 33-0201-W
These products and many more products can be ordered by visiting
WestonProducts.com or by calling
Weston Products LLC Toll Free at 1-800-814-4895
Monday thru Friday 8:00am-5:00pm EST. Outside the U.S. call 440-638-3131
If any components of this unit are broken or the unit does not operate
properly, call Weston Products LLC Toll Free at
1-800-814-4895
Monday thru Friday 8:00am-5:00pm EST. Outside the U.S. call 440-638-3131
NOTE: It is IMPORTANT TO FOLLOW ALL of the manufacturers
instructions for the grinder that will be used. Failure to do so may
cause injury!
1. Remove and disassemble the Juicer Attachment.
2. Wash all parts thoroughly with warm soapy water. Use a
toothpick or a ne brush to remove debris from the crevasses
and holes. Rinse with clear water. Dry immediately.
3. To extend the life of the Juicer Attachment, it is best to
coat the metal parts with a food-grade silicone spray before
storage and after cleaning.
3. Return the Juicer Attachment to it’s original box, store in a cool, dry area.
CLEANING INSTRUCTIONS
WARNING! Before cleaning, assembling or disassembling the grinder,
make sure the PLUG IS REMOVED FROM THE OUTLET/POWER SOURCE!
ALWAYS unplug the grinder when not in use.
FOR WARRANTY INFORMATION, Log onto www.WestonProducts.com -Customer Care
Grinder sold separately
WARNING!
Protective/cut-resistant
Kevlar Gloves are
recommended whenever
handling
the Blades!
* Model No. 33-0101-W and 33-0201-W
-2-
NOTE: It is IMPORTANT TO FOLLOW ALL of the
manufacturers instructions for the grinder that will
be used. Failure to do so may cause injury!
1. Place the Auger, spline end rst, into the
Juicer Head (Figure A).
2. Align the tabs on the Screen with the
notches in the opening on the Juicer Head.
Place the Screen onto the Auger.
3. Align the tabs on the Adjuster Cap with
the notches in the opening on the Juicer
Head. Place the Adjuster Cap onto the
Auger (Figure B). Twist the Adjuster Cap
counter-clockwise to lock the Adjuster Cap on
the Juicer Head.
4. Align the tabs on the Cap with the notches
on the Adjuster Cap. Twist the Cap counter-
clockwise to lock the Cap onto the Adjuster
Cap.
5. The Juicer Atachment is now assembled
(Figure C).
6. Align the splines on the Juicer Attachment
with the tabs on the motor unit (Figure D).
7. Press the Juicer Attachment against the
motor unit and rotate it counterclockwise until it
locks into place.
8. The Juicer Atachment is now ready for
use (Figure D).
9. Place the grinder tray (supplied with
the grinder) into the throat of the Juicer
Attachment. CAUTION! ALWAYS use the
stomper (supplied with the grinder) to push
food into the Juicer Attachmnet. NEVER
push food with hands.
ASSEMBLY INSTRUCTIONS
FIGURE A
NOTE: It is IMPORTANT TO FOLLOW ALL of the
manufacturers instructions for the grinder that will be used.
Failure to do so may cause injury!
1. Turn on the grinder.
2. Place the food that will be juiced into the throat of
the Juicer Attachment (Figure E).
3. Gently push the food into the Juicer Attachment
using the stomper. CAUTION! ALWAYS use the
stomper to push food into the Juicer Attachment.
NEVER push food with hands.
4. As the food is processed, the juice will come out
of the bottom Chute and any skin and seeds will come
out of the Cap. Place a bowl under the bottom Chute
and a bowl under the Cap to catch the juice and the
pulp. CAUTION! NEVER reach into the Juicer
Head.
HELPFUL HINTS: Rerun the skin and seeds through
the Juicer Attachment to extract any leftover pulp &
juice. Repeat as necessary.
NOTE: Twist the Cap to control the amount of
moisture in the pulp. The Adjuster Cap is marked “0”,
“1” or “2”. Be careful not to loosen the Cap from the
Adjuster Cap and the assembled Juicer Attachment
(Figure F).
USING THE JUICER ATTACHMENT
WARNING! Before cleaning, assembling or disassembling the grinder,
make sure the PLUG IS REMOVED FROM THE OUTLET/POWER SOURCE!
ALWAYS unplug the grinder when not in use.
FIGURE E
Stomper
RECIPES
Cap
-3-
Adjuster
Cap
Screen
Auger
Juicer
Head
FIGURE C
Auger
Splines
FIGURE B
Adjuster
Cap
(Back)
Screen
Auger
Juicer
Head
Tabs
Notches
FIGURE D
Splines
Assembled
Juicer
Attachment
Motor
Unit
Juicer
Attachment
Grinder
Tray
Stomper
Bottom
Chute
Cap
LARGE BATCH ITALIAN TOMATO SAUCE
1/2 cup olive oil 3 medium onions, chopped 2 cloves garlic, minced
3 Tbsp brown sugar 1 Tbsp dried oregano 4 tsp salt
2 tsp dried basil 1 tsp black pepper 12 cups fresh tomato puree
Heat the olive oil in a large pan
Sauté the onions and garlic until tender, do not overly brown
Add the rest of the ingredients
Bring mixture to a boil, reduce heat and simmer partially covered for 2 hours or until
sauce has reduced to desired consistency
Stir occasionally
Serve or allow to cool then refrigerate or freeze
Ingredients like sliced mushrooms, cooked/drained sausage, hamburger,
etc. can be added to taste
FIGURE F
Cap
Adjuster Cap
  • Page 1 1
  • Page 2 2

Weston 33-0821 User guide

Category
Mincers
Type
User guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI