Tappan Q7RF Installation guide

Type
Installation guide

This manual is also suitable for

Ambient Sensor Mounting Instructions
For optimum performance of the heat pump system, the ambient sensor is factory installed on
the control panel. Location is shown in Figure 1.
This addendum overwrites the Ambient Sensor Mounting instructions in the installation instructions
supplied with the unit.
ADDENDUM
Specifications & illustrations subject to change without notice or incurring obligations (02/19).
O’Fallon, MO, © Nortek Global HVAC LLC 2019. All Rights Reserved.
Figure 1. NEW SENSOR MOUNTING LOCATION
10253840
(NEW)
  • Page 1 1

Tappan Q7RF Installation guide

Type
Installation guide
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI