Educational Insights Hot Dots® Jr. Light-Up Interactive Pencil Product Instructions

Brand
Educational Insights
Model
Hot Dots® Jr. Light-Up Interactive Pencil
Type
Product Instructions

This manual is also suitable for

EI-2348
Caring for Your Hot Dots Jr. Light-Up
Interactive Pencil
How to Install and Replace the Batteries
The Hot Dots Jr. Pencil requires 2 AAA batteries,
not included. To install the batteries, use a coin to
unscrew the battery door on the back of the pencil.
Turn the coin in a counterclockwise motion until the
door opens. Install 2 fresh AAA batteries as shown
in the diagram. Replace the door. Use the coin to
tighten the door. Turn in a clockwise motion until the
door is secure.
• Do not use rechargeable batteries.
• Do not mix old and new batteries.
• Do not mix different types of batteries: alkaline,
standard (carbon zinc) or rechargeable (nickel-
cadmium) batteries.
• Do not recharge nonrechargeable batteries.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference,
and (2) this device must accept any interference
received, including interference that may cause
undesired operation.
• Remove rechargeable batteries from the toy
before recharging.
• Only charge rechargeable batteries under adult
supervision.
• Only use batteries of the same or equivalent type
as recommended.
• Insert batteries with the correct polarity.
• Remove exhausted batteries from the unit.
• Do not short circuit the supply terminals.
• To prevent corrosion and possible damage to the
product, we recommend removing the batteries
from the unit if it will not be used for more than
two weeks.
Cleaning Instructions
Clean the pencil with a damp or dry cloth. Do not
immerse or spray liquid or water on the pencil.
Developed in Southern California by Educational Insights.
© Educational Insights, Gardena, CA (U.S.A.). All rights reserved.
Learning Resources Ltd., Bergen Way, King’s Lynn, Norfolk,
PE30 2JG, UK. Please retain this information. Made in China.
www.educationalinsights.com
Hecho en China. Conserva el envase para futuras consultas.
Fabriqué en Chine. Veuillez conserver l’emballage.
Hergestellt in China. Bitte Verpackung gut aufbewahren.
Tell us what you THINK!
REVIEW
this product at
educationalinsights.com
Troubleshooting
If the Hot Dots Jr. Pencil does not work the first
time you use it:
• Make sure you have installed 2 AAA batteries in the
proper orientation.
If the Hot Dots Jr. Pencil does not work after using
it successfully:
• Take out the batteries and reinsert them, making
sure that they are sitting properly inside the battery
compartment.
• Install fresh batteries.
• Make sure the battery door is tightly secured.
If the Hot Dots Jr. Pencil still does not work:
• Make sure the tip of the Hot Dots Jr. Pencil is held
straight up and down and is touching the center of
the answer dot.
How to Position the Hot Dots
®
Jr.
Interactive Light-Up Pencil
Make sure the tip of the Hot Dots Jr. Pencil sits flat
on the surface of the answer dot as shown above.
The Hot Dots
®
Jr. Light-Up Interactive Pencil glows
green for answer reinforcement.
Using the Hot Dots Jr. Pencil
1. Read a question.
2. Position the pencil straight up and down and
touch an answer dot by pressing the end of the
pencil on the center of the dot.
• If correct, the pencil glows green.
• If incorrect, the pencil remains unlit.
  • Page 1 1
  • Page 2 2

Educational Insights Hot Dots® Jr. Light-Up Interactive Pencil Product Instructions

Brand
Educational Insights
Model
Hot Dots® Jr. Light-Up Interactive Pencil
Type
Product Instructions
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents