Ultrak 320 Operating instructions

Brand: Ultrak

Model: 320

Type: Operating instructions

Ultrak 320 is a versatile sports watch designed for athletes and fitness enthusiasts. With its stopwatch, stroke, and frequency measurement capabilities, it's an excellent tool for tracking performance and progress. It features up to 300 memories for lap/split times, allowing you to store and review your data for up to 101 races. The solar timekeeping ensures accurate timekeeping, and the water-resistant design makes it suitable for various activities.

DT 320 STOPWATCH

OPERATING INSTRUSTIONS

Water resistance

- The stopwatch is plash resistant.

Feature

- 300 memories

- Auto start stopwatch

- Calendar and time display

- Lap year display

- Memory indicator

- Memory recall

- Stopwatch

- Stroke / Frequency measurement

- Solar time stopwatch

Stopwatch

- Press (S4) until the display indicator points to Stopwatch.

Standard measurement

- Press (S1) to start --> Press (S1) again to stop --> Press (S3) to reset.

Accumulated Elapsed Time measurement

- Press (S1) to start --> Press (S1) again to stop --> Press (S1) to restart --> Press (S3) to stop

--> Press (S2) to reset.

Quick Reference Guide

stopwatch Stroke base 3 Time

Auto Start Solar Time

Hold (s3)

(s4) When Solar

time is on

SPLIT

LAP

RECALL

FULL

STOP

SPLIT

LAP

STOP

No. Of

Lap/Split

Stopwatch mode indicator

Split time

Lap time

Current time

Notes

1. Memory indicator

When 290 (lap/split) of data have been used. “Full” at the left bottom corner will begin to flash. It

indicates there are only 10 memories left.

When 300 (lap/split) of data have been used, “Full” will be displayed and a special sound will be

heard. It indicates all the memories have been used up.

When memories are used up, no more races can be recorded in memory.

2. Each race consumes some memories for start date and race information, taking more races will

reduce the total number of lap/ split that can be recorded.

Auto Start Mode

Hold (S3) for 2 seconds in Stopwatch Mode.

Auto-Start Setting

- Press (S3) to turn on the auto-start and minute digits will flash.

- Press (S3) to repeatedly select (flashing) digits (Minute Hour)

- Press (S1) to set the digits

- Press (S3) to accept the setting

Notes

1. Four short beeps and one long beep will be heard before the start time.

2. To turn off and exit the Auto Start Mode, press (S4).

Lap/split measurement

- Press (S1) to start --> Press (S3) record (Lap/split 1) --> Press (S3) record (Lap/split 2) --> Press

(S1) to stop --> Press (S3) to reset.

Viewing records in each race

- Press (S2) when the stopwatch is running or stop within each race.

Auto start mode indicator

On/Off indicator

Time setting

Current time

Base three stroke / frequency mode

- Measure the time required for three strokes can automatically calculate the number of stroke per

minute.

- Press (S4) until the display indicator points to Base Three Stroke / Frequency mode.

Time Mode

Press (S4) until the display indictor points to Time Mode.

Calendar and time setting

- Press (S3). Second digits flash

- Press (S3) again to select (flashing) digits (Second --> Minute --> Hour --> Year --> Month --> Day)

- Press (S1) to set the digits

- Press (S3) to accept the setting

Standard measurement

- Press (S1) to start --> Press (S1) to stop --> Press (S3) to reset.

Lap/split measurement

- Press (S1) to start --> Press (S3) record (Lap/split 1) --> Press (S3) record (Lap/split 2) --> Press

(S1) to stop --> Press (S3) to reset.

Base Three Stroke operation

- Press (S1) to start --> Press (S1) again to stop --> Press (S3) to reset

Note

When measuring time is less than 1 second, or more than 18 seconds, “Err” will display.

Solar Time Mode

Time mode indicator

Year

Month & Day

Current time

SPLIT

LAP

No. Of

Lap/Split

Solar time mode indicator

Year

Month & day

Current time

Base 3 storke mode indicator

Storke pre minute

Clear Record

Clear one race

- Hold (S1) for 4 seconds in the race information display, 11 short beeps will hear to alert the delete of

current record. One long beep indicates the record is deleted successfully.

Clear all race

- Hold (S1) for 8 seconds in the race information display, After the one race is deleted, 11 beep short

beeps will hear again to alert the delete of all record. A long beep indicates all the records are

deleted successfully.

Note

Please read notes of stopwatch for more information about the memory indicator.

View lap/split of each race

- Continuously press (S2) can view the lap/ split in each race

Select different race records

- Continuously press (S3) can select different race records.

Viewing records in each race

- Continuously press (S2) when the stopwatch is running or stop within each race.

Recall Mode

Press (S2) in at Time Mode or Stopwatch Mode.

RECALL RECALL

RECALL

Solar time mode indicator

start or split time

lap time

current time

Recall mode

Indicator

Cleaning current

record

Record No.

Solar time mode indicator

Recall mode

Indicator

Current

record

cleaned

Record

No.

Solar time mode indicator

Recall mode

Indicator

Cleaning

all

record

Record

cleared

Recall mode

Indicator

Battery

- The miniature battery, which powers your watch, should last approximately 2 years.

- When the screen become dim and cannot read the digits clearly, it is recommended to replace the

battery to prevent any malfunction.

- For battery replacement, we recommended you contact an AUTHORIZED DEALER and request a

CR2032 battery.

System Reset

Press (S1), (S2), (S3) and (S4) together can reset the stopwatch.

Items

Calendar

Solar time, Stopwatch and Auto Start

Maximum number of race

Maximum number of lap/split

Base three storke and frequency measurement

Range of measurement

01-01-2000 to 31-12-2099

Up to 9:59’ 59” 59

101

300

From 1 second to 18 second

Specification

www.digisportinstruments.com

Ultrak 320 Operating instructions

Ultrak 320 Operating instructions

Ultrak 320 Operating instructions

Related papers

Other documents