4
SPLIT TIME MEASUREMENT
Using this function, you can record the split
time from the beginning. For example, to
measure 3 split times, do the following:
1. Press “SPLIT/RESET” key to clear the
value to 0:00’00”
00, and press “RECALL”
key to select split mode. The split
mode icon will display on the LCD.
2. Press the “START/STOP” key
to start the measuring time.
3. Press the “SPLIT/RESET” key to record
the time spent on each event.
4. Press the “START/STOP” key to
stop the time measurement. The icon
“STOP” will display on the LCD.
Note:
1.During the measurement period or while
the time measurement is stopped, press
the “RECALL” key to check the time records.
2.The following picture depicts a split time
measurement.
RECALLING LAP & SPLIT RECORDS
1. Measure lap/split time as described in the
previous sections.
2. You may press the “RECALL” key to
enter recall mode and check the time
record only when there is at least one
lap/split time recorded.
3. Press “START/STOP” / “SPLIT/RESET”
key to check the time records upwards/
downwards.
4. Press “RECALL” key again to return to
lap/split mode.
Lap 1 time
Split 1 time
Lap 2 time
Lap 3 time
0 1 2
(Split)
Note:
1.The sports timer can measure 99-lap/split
time, but will keep a memory of the most recent
9 lap/split events.
KEY TONE SETTING
Press and hold “RECALL” key and press
“START/STOP” key or “SPLIT/RESET” key
to turn on/off the key tone. The icon “ ” will
appear or disappear on the LCD.
BATTERY REPLACEMENT
If there is no display on the LCD or the display
becomes dim, remove the screws in the back
of the unit and replace with 2 new LR44 batteries
according to the polarity information.
Note:
1.In order to reduce the battery power consumption,
expose the solar panel in an environment with
plenty of sunlight.
2. Attention! Please dispose of the used unit or
batteries in an ecologically safe manner.
Re-Order No.
N° Pour Nouvelle Commande
ST083020
www.MarathonWatch.com